Yaergor K16 Manual de usuario
Yaergor Digtal voice recoder
1
K16
User Manual
Please read this instruction manual before
useing
Yaergor Digtal voice recoder
2
Warm Tip:
If the product has‘t been used for a long time,please
charge and discharge it every three months.
Cautions
1. Children are forbidden to play the machine
alone.Please do not fall it down or rub and impact
it against hard objects, otherwise it may lead to
loss of data and other hardware damage.
2. Continuously using the earphone with high
volume is not recommended,please adjust it to
appropriate volume,and control the service time to
avoid your hearing loss.
3. Do not use any chemical or detergent to clean the
recorder, otherwise it will damage the machine
surface.
4. Using the recorder when driving a motor vehicle
or riding a bike is not recommended,please
ensure traffic safety.
5. Please backup files and data saved in the
recorder in time.The internal data are not
protected by our company who takes no
responsibility for any loss of data.
Yaergor Digtal voice recoder
3
6. Over-voltage,power cable strain,bending or
squeezing by heavy objects is not allowed to
avoid overheating or fire disaster.
7. Wet hand is not allowed to touch power to avoid
shock.
8. The performance and function of this product may
be changed without further notice,please
understand.
1. Product appearance picture and
name of each pare
1) Sound input
2) Record Button: one-click
recording and saving
3) Play Button: short press
to play or pause,long
press to start up or shut
down;in main menu,
short press to enter into
sub menu or save modified settings.
4) M Button: long press to enter into settings
Yaergor Digtal voice recoder
4
menu,short press to return to the previous
menu.in standby mode,short press it to switch to
music files or recording files; in playing mode,
short press A-B to repeat.
5) PREV: short press to switch to the previous,long
press to fast reverse when playing.
6) NEXT: short press to the previous,long press to
fast reverse when play.
7) Recording Indicator Hole
8) Display Screen.
9) Speaker Hole: spread sounds out through the
speaker.
10) Earphone Jack: connect with earphone cable.
11) “+”: volume increasing button,volume number
increases.
12) “-”: volume decreasing button,volume number
decreases.
13) Back Splint
14) USB Socket
15) Reset Button: press it to reset when the
recorder crashes.
Yaergor Digtal voice recoder
5
2. Operating Instructions
1) Start up/Shut down
a. When the machine is in dormant state, long
press“ ”button to start up.
b. When the machine is on, long press“ ”button to
start down.
2) Play
a. Music Play：short press“M”butter to switch to
switch to music play mode after starting up, short
press“ ”button to play music file.
b. Voice Play：short press“M”button to switch to
voice play mode after starting up, short
press“ ”button to play recording file.
3) Record/Save Recording
a. When the recorder is on, push“record button”up
to enter into recording mode; push it down to
save recording file, short press“ ”button to pause
Yaergor Digtal voice recoder
6
or play recording file.
4) Record Setting
a. In standby mode, long
press“M”button to enter into
main menu，short press“ ”、
“ ”button to choose“record
setting”，short press“ ”button
to enter，short press“M”button
to exit.
b. Short press“ ”、“ ”button to
choose “record format” ，short
press“ ” 、“ ”button to
choose“WAV format”,“MP3
format”，short press “ ”button
to save the setting,short
press“M”button to exit .After
Yaergor Digtal voice recoder
7
that, the recording file will be saved in the format
you have set.
c. Short press“ ”、“ ”button to choose “Bit rate”，
short press“ ”button to enter, after choosing，
“WAV format” （256kbps/512kbps/1536kbps ）
/“MP3 format” （32KBPS/128KBPS/192KBPS ）
short press“ ”、“ ”button to choose Bit rate,
short press“ ”button to save the setting, short
press“M”button to exit. After that, the recording
file will be saved in the Bit rate you have set.
d. Short press “ ” 、“ ”button to choose
“segmented recording”，short press“ ”button to
enter，the segmented recording of this machine
can beset as closed or open, with30 mins, 60
mins ，120 mins for you to
chose.If the segmented
recording is open, the
recording file will be saved
according to programmed
time duration.
e. Short press“ ” 、“ ”button to
choose“voice-zctivated mode” ，short
Yaergor Digtal voice recoder
8
press“ ”button to choose
“Open/Close”“voice-zctivated mode” short
press“ ”button to save the setting, short
press“M” button to exit. After that, it will record
according to the setting you have set.
（Warn tip:when the “voice-activated mode”is on,
the machine will automatically sense the
surrounding sounds when recording. The
function is not recommended under important
circumstance.）
f. Short press“ ”、“ ”，button to choose “record
monitor”，short press“ ”button to enter, short
press“ ” 、“ ” button to choose ，
“Open/Close ”,short press “ ”button save the
setting, short press“M”button to exit. When
choosing“turn on monitoring”, plug in the
earphone, you can hear contents of the recording
g. Short press “ ”、“ ”button to choose “timing
Yaergor Digtal voice recoder
9
record”，short press“ ” button to enter, short
press “M”button to exit.
1Short press“ ” 、“ ”button to choose
“time record(on/off)” ，short press“ ”button to
enter，short press“ ”、“ ” button to choose “on”,
short press“ ”button to save the setting.
2Short press“ ” 、“ ” button to
choose“start time”，short press“ ”button to enter，
short press“+”/“-” to adjust the number, short press
“ ” 、“ ” button to adjust digits, short
press“ ”button to save the setting, short
press“M”button to exit.
3Short press“ ”、
“ ”button to choose “end
time” ，short press“ ”button to enter, short
press“+”/“-” to adjust the number, short press“ ”、
“ ”button to adjust digits,short press“ ”button to
save the setting, short press“M”button to exit.
4Short press“ ”、“ ”button to choose “time
Yaergor Digtal voice recoder
10
record period” ，short press“ ”button to enter,
short press “ ”、“ ”button to choose “once/every
day/workday”，short press“ ”button to save the
setting, short press“M”button to exit.
h. Short press “ ” 、“ ”button to choose “set
record scene” ，short press“ ”button to
enter,short press“ ”、“ ”button to choose from
common scene, railway scene, meeting scene
and remote scene, Users can choose according
to the soot, short press “ ”button to save the
setting, short press “M”button to exit. After that it
will record according to the record scene you
have set.
i. Short press “ ”、“ ”，button to choose “record
light switch”，short press “ ”button to enter，
“ ” 、“ ” button to choose“on/off” ，short
press“ ”button to save the setting, short press
“M”button to exit. When choosing“off”,the
indicator light is off when recording: when
choosing“on”,the indicator light flashes when
recording。
5) Player Setting
Tabla de contenidos
