Yada BT58190 Manual de usuario
DUAL-1080PROADCAM
User Manual
Important, retain for future reference:
Read carefully
BT58190
2
QUICK INSTALLATION GUIDE
1. Mount the Roadcam
Before you begin... Gather these items.
1
1
2
2
3 4
Mount the Roadcam
on the windshield.
3
3
4
3. Connect to Power
2. Insert the MicroSD Card
4
Please read all of the installation instructions carefully before installing
the product. Improper installation will void manufacturer’s warranty. The
installation instructions do not apply to all types of vehicles, and are
written as guidelines to assist in installing the system.
Consult an experienced technician if you are not comfortable installing
the product. You can also contact YADA at 1.866.294.9244 to speak
to one of our installation specialists if you have any specific questions
regarding the Dual-1080P Roadcam.
BEFORE using the Dual-1080P Roadcam, please read the safety
information provided in this user manual. ALWAYS use the
product as outlined in this user manual.
Please make sure to read and understand all local laws and regulations
regarding cameras and their use in a vehicle. Laws vary by state.
INTRODUCTION
5
PACKAGE CONTENTS
1. 1 x Dual-1080P Roadcam
2. 1 x Windshield Mount
3. 1 x 12V/24V Power Adapter
4. 1 x 16GB MicroSD Card
1 2
3 4
6
PRODUCT SPECIFICATIONS
Display: 1.5 inch display
Front and Rear Lenses:
120 degrees diagonal
Video Resolution: 1080P / 25 FPS
Circular Video: Seamless loop recording
Memory Card: MicroSD (maximum support 32GB)
Microphone: Supported
Built-in Audio: Supported
Operating Temperature: 14°F~140°F (-10°C~60°C)
Operating Voltage: Cigarette Charger - DC 12/24V / DC 5V (Mini-USB)
Battery: Built-in 300 mAh li-ion battery
7
PRODUCT OVERVIEW
Rear Camera Lens LCD Screen
Mount Socket
Speaker
LED Indicator
Speaker
Front Camera Lens
Mini-USB Power Port
Infrared LEDs
8
CAMERA CONTROLS
CAMERA DIMENSIONS
Power / OK Button
Menu / Mode Button
1.46” / 37mm 3.98” / 101mm
1.86” /
47mm
Down Navigation Button
Power Reset Hole
Microphone
MicroSD Card Slot
Up Navigation Button
Peel off the
protective sticker
from the LCD screen.
9
1. 2.
3.
INSTALLATION
Insert the
windshield
mount to the
socket on the top
of the Roadcam.
Plug the Mini-USB
power cable into the
DC input port.
Note: Power on and test camera before mounting.
10
4.
5.
INSTALLATION
Mount the Roadcam on the windshield. You can turn on
the Roadcam and check the live screen to determine the
most suitable mounting position.
Warning: Do not install the product in a location where it
can obstruct the driver’s field of vision.
Recommended mounting position
Adjust the rear camera
lens angle to get the
best interior view.
Tabla de contenidos
Otros manuales de Cámara de salpicadero de Yada
Yada
Yada BT532983 Manual de usuario
Yada
Yada BT58186 Manual de usuario
Yada
Yada 4K Roadcam Pro Manual de usuario
Yada
Yada Dash Road Cam HD Manual de usuario
Yada
Yada BT53328F-1 Manual de usuario
Yada
Yada BT58240 Manual de usuario
Yada
Yada BT53328 Manual de usuario
Yada
Yada YD-V43 Manual de usuario
Yada
Yada BT532981 Manual de usuario
Yada
Yada BT55496 Manual de usuario
