Xview XV4KDVR Manual de usuario
XV4KDVR
USER MANUAL
xviewdrive.com.au
for more information on
the Xview range go to
our website
VIEW
INCLUSIONS:
Dash Cam, GPS power cable, camera mount, charger,
USB cable, memory card
2
1. PRODUCT PICTURE AND FUNCTIONS
1) Lens
2) Speaker
3) Touch Screen
1
2
3
3
NOTE: Car camera supports up to 128GB Micro SD card.
Class 10 Micro SD card is required.
4 5
6 7
8
9
4) Mini USB input
5) Mounting Slot
6) Microphone
7) Reset hole
8) POWER Button
9) Micro SD Card Slot
4
2. INSTALLATION
2.1 Insert Micro SD card into the Dash Cam
2.2 Attach the mounting bracket to the Dash Cam by sliding
the mount into the mounting slot of the Dash Cam
2.3 Check position of the Dash Cam before fixing the camera
on the inside surface of the windshield. The area near the
rear-view mirror is suggested. (See installation diagram).
Make sure the windscreen is clean and free of debris. Use
an Alcohol wipe to enhance adhesion. Remove the tape off
the adhesive mount and adhere to the windshield holding in
position for 60 seconds
2.4 Insert the Mini USB end of the GPS power cable into the
Mini USB Power socket/ charging point of the Dash Cam.
Remove backing off 3M tape of GPS cable and fix to
window. For a better GPS signal ,make sure the 3M sticker
faces toward the sky and is not blocked or obstructed.
Connect USB charging end of the GPS power cable into
12/24V power socket of vehicle
2.5 Adjust the mounting bracket and rotate the camera
direction to get the best view.
2.6 Turn vehicles ignition to accessories and the Dash Cam
will power ON and start recording automatically. An audible
tone will heard once powered.
2.7 The recording indicator light will start flashing RED on the
screen and a will appear when recording has started.
2.8 For the Dash Cam to work it must receive power from
the charging adapter. Once power is removed or turned off
the Dash Cam will save the current file and turn off.
5
3. INSTALLATION DIAGRAM
INCLUSIONS:
Dash Cam, GPS power cable, camera mount, charger,
USB cable, memory card
Suggested
GPS
NOTE: The Dash Cam GPS power cable must be used
to retain date and time settings.
6
4. SCREEN FUNCTIONALITY
4.1 When connected to power the Dash Cam will
automatically turn on. Once power is disconnected it will
automatically turn off.
4.2 To turn the Dash Cam on or off manually, press and hold
the button.
4.3 The indicator light on the side of the Dash Cam
illuminates blue when charging. Once fully charged it will turn
off.
4.4 The indicator light on the side of the Dash Cam flashes
red when its recording
4.5 A red circle also flashes on the screen of the Dash Cam
when its recording
4.6 When you touch the screen it reveals 5 icons on the
bottom of the screen.
4.7 Touch the video icon to stop and start recording
4.8 Touch the camera icon to take a picture
4.9 When in recording mode touch the lock icon to lock and
unlock current recording file
4.10 When not in recording mode touch the playback icon to
play or view video and picture files
4.11 When not in recording mode touch the settings icon
icon to display Dash Cam settings
7
5. DASH CAM SETTINGS MENU
Settings can only be accessed when not in recording mode
5.1 Video Resolution
5.2 Photo Resolution
5.3 Loop recording
5.4 Exposure
5.5 WiFi
5.6 Parking Monitor
5.7 G Sensor
5.8 Screen Save
5.9 Language
5.10 Beep Sound
5.11 Record Audio
5.12 Frequency
5.13 Delayed Power Off
5.14 GPS
5.15 Time Zone
5.16 Speed Unit
5.17 Daylight Saving
5.18 Date/Time
5.19 Format
5.20 Default Setting
5.21 Version
8
6. VIDEO AND PHOTO PLAYBACK
Playback Mode:
Touch the playback symbol to display all video or photos
taken. Use the [UP] and [DOWN] arrows to scroll through
files. Touch the file thumbnail to view or playback. Icons will
appear at the bottom of the screen to return to previous
screen, previous file, next file, delete or play.
Protected files:
The thumbnail will have a red warning triangle icon. When you
select the file for playback a key symbol will appear at the top
of the screen.
7. ACCESSING FILES VIA YOUR COMPUTER
8. RESETTING THE DASH CAM
To access video and images from your Dash Cam, connect
the USB cable to your computer. Two options will appear on
the Dash Cam screen. Select Mass storage and a folder
called “Untitled” will appear on your computer. Select PC
camera to use Dash Cam as a web cam. Or alternatively
remove the SD card from the Dash Cam and the SD card into
a card reader to connect to your computer.
Inside this folder will be 3 folders:
Movie folder: recorded movie files (MP4)
Photo folder: picture files (JPG)
EMR folder: locked/Gsensor movie files (MP4)
Insert a pin into the reset hole on the bottom the Dash Cam
and press in with the Dash Cam turned on.
9
9. CONNECTING TO WIFI & USING THE APP
Recording video, taking photos, live streaming, GPS data,
download files and changing Dash Cam settings can all be
done via WiFi and downloading the ‘Xview XV4kDVR’ APP.
For iPhones search the APP Store or for Android devices via
Google Play.
9.1 To pair the Dash Cam with your smartphone, go into the
settings menu on your Dash Cam and turn Wifi on.
9.2 The Dash Cam will display the SSID name and password
to connect to your phone.
9.3 Then go to your WiFi settings on your smartphone, turn
WiFi on and it should display all devices for connection.
9..4 Select your Dash Cam model SSID name.
9..5 Enter the password 12345678.
9.6 Once successfully paired to your DASH CAM the display
will say WiFi Connected
9.7 Then launch the ‘Xview XV4kDVR’ Dash Cam APP to
access functions.
9.8 Once connection is successful, the indicator light on the
side of your Dash Cam turns red.
9.9 What files do you need to download to use in the App
10
10. USING GPS FUNCTION
To use the GPS function, the GPS antenna module must be
plugged into the Dash Cam. The GPS functionality will not be
available with the Dash Cam if removed.
Notes: For a better GPS signal ,make sure the 3M sticker
faces toward the sky and is not blocked or obstructed.
10.1 For GPS data go into the settings menu on your Dash
Cam and turn GPS on.
10.2 This function is only valid when the external GPS module
is connected. After the external GPS is connected, this
function can be turned on to record, store and output data of
the driving speed, time, mileage and other state information of
the car.
10.3 When activated a GPS symbol will appear on screen and
flash, until it receives a signal then it will turn green
10.4 To view the GPS map using the mobile phone APP, you
need to download the video file in the Dash Camera to the
mobile phone for normal viewing.
10.5 You can also download a free GPS player for your
computer to display data at:
http://www.goodcam.net/download/GPSPlaySetup.zip
Tabla de contenidos
Otros manuales de Cámara de salpicadero de Xview
