Xtreme XB-502 Manual de usuario
1
XB-502
Electric Moped/Bicycle
Owner’s Manual
Read this manual completely before riding your electric bicycle
X-Treme TM Electric Moped
2
Table of Contents
Table of Contents…………………………………………………………………………………. 2-3
Riding Safety………………………………………………………………………………………..4-6
Product Specifications……………………………………………………………………………. 7
Package Contents………………………………………………….……………………………… 8
Installation Instructions…………………………………………….……………………………… 8-12
Front Wheel & Brake………………………….…………………………………………….. 8
Handle Bar Installation………………………..…………………………………………….. 9
Headlight/Headlight Fairing Installation..…….…………………………………………….10
Trunk/Pedals/Mirror Installation……….…………………………………………………… 11
Battery Connection & Initial Charging Instructions………………………………………. 12
Tire Inflation………………………………………………………………………………….. 12
Product Specification…………….…………………………………………………………………13
Operation…………………………………………………………………………………………… 14
Riding Tip Checklist……………………….………………………………………………………. 14
Battery Charging & Safety…………………………………………………………………………15
Basic Maintenance & Schedule………………………………………………………………….. 15-16
How To Guide………………………………………………………………………………………. 17-24
How To Assemble Rear Wheel…………………………………………………………….. 17-18
How To Remove Front Wheel……………………………………………………………… 18
How To Install Front Wheel………………………………………………………………… 19
How To Remove Hub Motor…………………………………………………………………19
How To Replace Controller…………………………………………………………………. 19
How To Replace Rear Inner Tube…………………………………………………………..19-20
How To Replace Dash………………………………………………………………………. 20
How To Center Handle Bars……………………………………………………………….. 20
How To Check Brake Safety Switch………………………………………………………. 20-21
How To Adjust Drum Brakes……………………………………………………………….. 21
How to Install Bearings…………………………………………………………………….. 21
How To Align Front Forks…………………………………………………………………... 21-22
How To Test Rear Wheel & Controller……………………………………………………. 22
How to Check Voltage………………………………………………………………………. 22-23
3
How To Test Motor Sensors……………………………………………………………….. 23-24
Troubleshooting…………………………………………………………………………………… 24-30
Scooter Won’t Run, Charger Light Stays Green…………………………………………. 24
Scooter Won’t Run, Charger Light Stays Red & Green………………………………… 24
Is It My Throttle or My Controller?.................................................................................24-25
Throttle Voltage Test………………………………………………………………………… 25
Intermitted Power Loss…………………………………………………………………….. 25-26
No Power…………………………………………………………………………………….. 26
After Fully Charging, Powers Only For Short Distance Use…………………………… 27
Scooter On, Won’t Run…………………………………………………………………….. 27
Scooter Will Not Move……………………………………………………………………… 28
Charger……………………………………………………………………………………… 28
Hub Motor Tests…………………………………………………………………………….. 29-30
Diagrams………………………………………………………………………………………….. 31-35
Controller Connector Placement/ Wiring Diagram………………………………………. 31
Voltmeter Wiring Diagram………………………………………………………………….. 32
Rear Motor Diagrams………………………………………………………………………. 33
Complete Wiring Diagram…………………………………………………………………. 34
Battery Wiring Diagrams…………………………………………………………………… 35
Support……………………………………………………………………………………………… 36
4
RIDING SAFETY
Like any sport, biking carries the risk of injury and damage. By choosing to ride the
XB-502, you assume all responsibility for these risks. Thus, you need to know
and practice the rules of safe and responsible riding.
YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS
INVOLVING THE USE OF THIS ELECTRIC BICYCLE. TO DETERMINE IF COVERAGE
IS PROVIDED YOU SHOULD CONTACTYOUR INSURANCE COMPANY ORAGENT.
Safety Basics: Do’s and Don’ts
The Do’s
oAlways conduct a Safety Check before you ride your XB-502. Be thoroughly familiar with
the controls of your XB-502.
oAlways wear an approved helmet when riding your XB-502. Follow the helmet
manufacturer’s instructions for fit, use and care of your helmet.
oAlways keep body parts and other objects away from the spinning wheels of your XB-502.
oAlways wear shoes that will stay on your feet and will stay on the floorboard.
oWear bright, visible clothing that is not so loose that it can catch on moving parts of the
XB-502 or objects at the side of the road or trail.
oThink about your speed, and keep your speed consistent with safe operating conditions.
The Don’ts
oNever ride with headphones. They mask traffic sounds, distract you from concentrating on
your surroundings, and their wires can tangle in the moving parts of the XB-502, causing you
to lose control.
Never carry a passenger. The maximum carrying capacity is 300 lbs.
oNever ride barefoot or wearing sandals.
oDon’t jump with your XB-502. It puts great stress on everything from frame and forks to drive
train. Riders who insist on jumping their XB-502 risk serious damage to their XB-502 as
well as to themselves.
oNever carry anything which obstructs your vision or your complete control of the XB-502 or
which could become entangled in the moving parts of the XB-502.
oNever hitch a ride by holding on to another vehicle.
oNever ride your XB-502 while under the influence of alcohol or other drugs.
5
oIf possible, avoid riding in bad weather, when visibility is obscured, at dusk or in the dark, or
when you are very tired. Each of these conditions increases the risk of accident.
oNever allow children to ride. Never allow others to ride without reading and understanding
these instructions.
Operating Reminders and Suggestions
oReview all instructions carefully before riding the XB-502.
oFollow all rules and regulations in your area for operating a motorized bicycle. Obey the same
road laws as all other road vehicles, including yielding the right-of-way to pedestrians, and
stopping at red lights and stop signs.
oRide predictably and in a straight line. Never ride against traffic.
oRide defensively. To other road users, you may be hard to see.
oConcentrate on the path ahead. Avoid potholes, gravel, dirt, wet road, oil, curbs, speed
bumps, drain grates and other obstacles.
oBe alert for unexpected events, such as opening car doors or cars backing out of concealed
driveways.
oBe extra careful at intersections and when preparing to pass other vehicles.
oDon't carry packages or passengers that will interfere with your visibility or control of the
bike. Don't use items that may restrict your hearing.
oMaintain a comfortable stopping distance from all other riders, vehicles and objects. Safe
braking distance and forces are subject to the prevailing weather and road conditions.
Wet Weather Riding
Wet weather impairs traction, braking and visibility, both for the rider and for other vehicles
sharing the road. The risk of accident is dramatically increased in wet conditions. In wet
weather you need to take extra care. In wet conditions, the stopping power of your brakes (as
well as the brakes of other vehicles sharing the road) is dramatically reduced. This makes it
harder to control speed and easier to lose control. To make sure that you can slow down and
stop safely in wet conditions, apply your brakes earlier and more gradually than you would
under normal, dry conditions.
Decrease your riding speed, avoid sudden braking, and take corners with additional caution.
Keep in mind that there is a direct, but inverse, relationship between speed and controllability.
Be more visible on the road. Wear reflective clothing and use safety lights.
Potholes and slippery surfaces such as lane markings and train tracks all become more
hazardous when wet.
Night Riding
A rider is very difficult for motorists to see at dusk, at night, or at other times of poor visibility. If
you must ride under these conditions, check and be sure you comply with all local laws about
night riding; follow the Rules of the Road, and take the following precautions:
6
Make sure that your XB-502 is equipped with correctly positioned and securely mounted
reflectors. Make sure your clothing or cargo does not obstruct a reflector or light.
Wear light colored, reflective clothing and accessories, any reflective device or light source that
moves will help you get the attention of approaching motorists, pedestrians and other traffic.
Ride slowly. Avoid hazards, such as potholes and curbs.
Avoid areas of heavy traffic, dark areas, and roads with speed limit over 35 mph. If possible, ride
on routes already familiar to you.
Ride at night only if necessary. Slow down and use familiar roads with street lighting, if possible.
Other Important Reminders
The battery does NOT require deep discharging. If your XB-502 is put into storage, re-charge its
battery at least once every 90 days.
Do not store your XB-502 in direct sunlight for an extended time.
Store your XB-502 in a dry place. Exposing your XB-502 to rain, snow, or other precipitation may
result in damage.
DO NOT RETURN TO STORE!
Do not use this vehicle for the first time until you have inflated the tires to the correct PSI
and completely charged the battery. Failure to follow these instructions may damage your
vehicle and void your warranty.
CALL OR GO ONLINE
1-253-777-0690 / www.x-tremescooters.com/support/
For General Information or Parts Visit www.x-tremescooters.com
7
Product features
8
Package Contents:
XB-502 Moped/Bicycle
48V 12AH Charger
Left & Right Mirrors
Front Tire
Left & Right Foot Pedals
Ignition Keys
Trunk
Foot Pad
User Manual & Tool Kit
Assembly Instructions
After removing the cardboard carton & metal crate, disconnect all wires holding the items in place
and remove all protective packaging foam. Remove axle from front fork & shipping crate and
set aside, do not discard. There are 8 installation steps that must be done prior to using your
XB-502. Be sure to do them in order and do not skip a step.
1.) INSTALLATION OF FRONT WHEELAND BRAKE.
1. Insert brake hub onto wheel as shown
above.
2. Slide wheel into front forks being sure
to align brake hub bracket with right side
fork. See image below.
(When sitting on bike, front brake is on riders
left side of front wheel)
9
2.) HANDLEBAR INSTALLATION
3. Slide axle thru left fork, then spacer before
inserting it into the left side of front wheel.
4. Secure with nut on right side (brake side)
and tighten securely
1. Locate and remove the handlebar bolt,
washer & nut as shown above.
2. Slide handlebars over post in the correct
position, then insert the bolt & concave
washer into the front (speedometer side) of
the handlebars and secure with nut on the
back (riders side). Concave washer should
be partially inserted into the handlebar and
make contact with internal post to be
tightened properly and securely.
10
3.) HEADLIGHT/HEADLIGHT FAIRING INSTALLATION
4-6.) TRUNK/PEDALS & MIRROR INSTALLATION
1. Locate and remove packing material
from the front headlight fairing.
2. Attach wire clips as shown.
3. Line up headlight fairing to front of
scooter being careful not to break the
plastic clips underneath.
4. Slide the headlight fairing into place
and snap.
5. Finally, secure to front of scooter
using the 4 enclosed screws.
1. Attach trunk to back cargo rack
using the 4 enclosed bolts/nuts &
washers. Secure to rack with the
washers & nuts on the underside.
Otros manuales para XB-502
1
Tabla de contenidos
Otros manuales de Bicicleta de Xtreme
