XtendLan EBF-231-5I24 Manual de usuario
EBF-231-5I24
Embedded PC
User’s Guide
Safety Instructions
1. Please read this manual carefully before using the product;
2. Before inserting, removing or re-configuring motherboards or expansion cards,
first disconnect the computer and peripherals from their power sources to
prevent electric shock to human bodies or damage to the product;
3. Before moving the product, please unplug the AC cable from the power socket;
4. When inserting or removing boards, please firstly unplug the AC power cable;
5. Before connecting or disconnecting any signal cable, make sure all power cables
are unplugged in advance;
6. After turning off the computer, wait at least 30 seconds before turning it back
on;
7. All the operations such as upgrade, remove or installation shall be implemented
on the ESD worktable, because some exactitude components are sensitive to
electrostatic discharge (ESD).
8. If there's no ESD worktable, please take the following measures to prevent
damage from electrostatic discharge (ESD):
a)
Wear a antistatic wrist strap and connect it with the metal part of the
correspondingproduct;
b)
Always touch the metal enclosure or frame before touching any
components;
c)
Keep part of your body in contact with the metal enclosure to discharge the
static while handling components;
d)
Avoid unnecessary movement;
e)
Hold the components (especially the boards) by the edges;
f)
Place the components on a grounded, static-free operating platform. Use a
conductive foam pad if available (not the component wrapper).
g)
Do not let the components slide on the operating platform.
9. Use cross-head screwdriver to operate. A magnetic screwdriver is recommended
(Magnet helps to prevent screws from remaining in the enclosure). Do not leave
any tools or accessories inside the enclosure;
10. Ensure abundant cooling and ventilation.
11. Non-professional personnel are not allowed to open the enclosure.
C o n t e n t s
Chapter 1 Product Introduction........................................................................................4
Overview..........................................................................................................................4
Main Function..................................................................................................................4
Main Performance............................................................................................................6
Mounting Mode...............................................................................................................7
Requirements of Transportation and Storage....................................................................8
Chapter 2 Installation.......................................................................................................9
Product Outline................................................................................................................9
Product Appearance and Installation Dimensions...........................................................10
External Connectors.......................................................................................................11
Overall Assembly Drawing............................................................................................12
Install the Hard Disk......................................................................................................14
Install the PCI-E Expansion Card...................................................................................15
Install the Wall-mounted Bar .........................................................................................15
Chapter 3 Install the Drivers........................................................................................136
- 4
Chapter 1 Product Introduction
Overview
EBF-231-5I24 is a high performance low power fanless embedded box PC. The
product
features al-alloy chassis, small form factor, compact and rugged structure, as
well as fanless design. The PC dissipates heat from the shell, and provides excellent
dust-proof, heat dissipation and anti-vibration performance. The product can be used in
harsh environments with heavy contamination, dust and serious EMI, etc.
EBF-231-5I24 contains the latest Intel® QM57 high performance processor solution,
supporting Intel® AMT6.0 technology. The prominent feature of the AMT technology is
to support the maintenance personnel to maintain and control the remote console.
The
PC provides small size, complete function and strong environment adaptability, and
targets high-end customers. It is mainly applied in the media video fields such as multi-
media advertising players, flight information display at airport and video
surveillance
for intelligent transportation, etc.
Main Function
Microprocessor
Supports the Mobile processor of the Intel® rPGA988 package: Intel® CoreTM i7 600
series, Intel® CoreTM i5 500 and 400 series, Intel® CoreTM i3 300 series and Intel®
Celeron® Processor P4500(AMT6.0 is not supported by this type of the CPU); the PC
supports Intel® CoreTM i7 620M or i5 520M in standard configuration.
Chipset
Mobile Intel® QM57 Express Chipset
Memory
Provides two 204Pin DDR3 SODIMM memory slots, supporting Un-buffered
Non-
ECC memory. The maximum memory capacity for a single slot is up to 4GB while
that supported by the board is up to 8GB with the supported memory frequency:
- 5
800/1066MHz. The PC provides a single 2G memory bank as standard configuration.
Network Function
Provides two 10/100/1000Mbps LAN ports; LAN1 supports Wake-on-LAN, LAN
PXE booting and AMT6.0 functions.
Display Function
Adopts Intel® Arrandale CPU built-in integrated graphic controller display
chip;
Supports independent dual-display CRT+HDMI and hot swap function, both of
which are synchronous output;
The maximum resolution and fresh frequency supported by VGA is up to
2048x1536@75Hz while that supported by HDMI is up to 1920x1200@60Hz.
Audio Function
Adopts ALC888 HDA sound effect chip, supporting MIC-in/Line-in/Line-out
functions.
On-board IO
Four RS-232 serial ports, COM1 supports RS-232/RS-422/RS-485 mode and
Modem wake-up function;
Four USB2.0 ports (two are front-accessible while the other two are at the rear);
One VGA connector;
One HDMI connector;
Two 10/100/1000Mbps LAN ports;
A set of audio connectors (MIC-in/Line-in/Line-out);
One DC-in connector.
- 6
Storage Device
Provides one 2.5″250G hard disk as standard configuration;
Power Feature
The PC provides one built-in DC-DC wide-voltage input power module as well as
AC-DC adapter in standard configuration.
①PC DC wide voltage input feature.
Input Voltage/Frequency: 9 ~ 36V DC.
②AC-DC adapter feature:
Power Type: appropriate adapter;
Input Voltage/Frequency: 100 ~ 240VAC 50Hz/60Hz;
Total Power: 90W(Max);
Expansion Bus
Expand one PCIe card with 106.7mm in height and 167.7mm in length, complying
with PCIE2.0 standard.
Power Consumption of the PC
Power Consumption: 21.1W (Standby)
Power Consumption: 43.4W (100% operate 3D)
Main Performance
Mechanical Dimensions, Weight and Environment
Dimensions: 290mm (L) x 242mm (W) x 112.5mm (H);
Net Weight: 7.2Kg;
OperatingEnvironment:
Temperature: 0°C ~ 45°C;
Humidity: 5% ~ 90% (non-condensing);
- 7
StorageEnvironment:
Temperature: -30°C ~ 65°C;
Humidity: 5% ~ 90% (non-condensing);
EMC
GB9254-1998 Radiation susceptibility class A, Conducted disturbance class A;
GB/T 17626.2.2006 Electrostatic discharge, level 2;
GB/T 17626.3-2006 Burst immunity, level 2;
GB/T 17626.5-2008 Surge (Impact) immunity, level 2;
GB/T 17626.6-2008 Conducted susceptibility, level 2.
Reliability
MTBF≥50000h;
MTTR≤0.5h.
Safety
Meets the basic requirements of GB4943.
Mechanical and Environment Adaptability
Anti-vibration: 5-19Hz/1.0mmamplitude;19-200Hz/1.0g acceleration;
Anti-shock: 15g acceleration, 11ms duration.
Mounting Mode
□19″Rack Mount □Desktop □EmbeddedPanel
■Wall Mount □VESA Standard Supporting Arm □Portable
□Others
- 8
Requirements of Transportation and Storage
Transportation
Well-packaged products are suited for transportation by truck, ship, and plane. During
transportation, products should not be put in open cabin or carriage. When
transshipping en route, products should not be stored in open air without protection
from the atmospheric conditions. Products should not be transported together with
inflammable, explosive and corrosive substances and are not allowed to be exposed to
rain, snow and liquid substances and mechanical force.
Storage
Products should be stored in package box when it is not used. And warehouse
temperature should be 0°C ~ 40°C, and relative humidity should be 20% ~ 85%. In
the warehouse, there should be no harmful gas, inflammable, explosive products, and
corrosive chemical products, and strong mechanical vibration, shock and strong
magnetic field interference. The package box should be at least 10cm above ground,
and 50cm away from wall, thermal source, window and air inlet.
- 9
Chapter 2 Installation
Product Outline
- 10
ProductAppearance and Installation Dimensions
Unit: mm
Tabla de contenidos
Otros manuales de De oficina de XtendLan
XtendLan
XtendLan TC-965 Manual de usuario
XtendLan
XtendLan PTDX5311 Manual de usuario
XtendLan
XtendLan TCD-N2600-C2G2-2 Manual de usuario
XtendLan
XtendLan TV-850B Manual de usuario
XtendLan
XtendLan TC-800 Manual de usuario
XtendLan
XtendLan EBF-211-Z3735F-2-32 Manual del propietario
XtendLan
XtendLan TC-261 Manual de usuario
XtendLan
XtendLan EBF-211-Z3735F-2-32 Manual del propietario
