XLOCK 100 Manual de usuario
XLOCK 100
INSTALLATION Guide
MTA_9 344 049 00
PACKAGING CONTENTS
2
2 x countersunk screws
4 x 40 mm for lock.
1 x countersunk screws
4 x 25 mm for lock.
3 x Screws for closed parts
Lens head 3 x 12 mm.
Lock
XL100
Closing part
S12
Battery
2CR5, 6V lithium battery
Attention: Please order
batteries separately.
Always use lithium batteries!
3
DIMENSIONS
Lock
XL100
Closing part
S12
PREPARATION FROM THE LOCK
Open the battery
compartment cover and
insert the batteries with
the correct polarity (+/-).
1pcs 2CR5, 6V
lithium batteries
For error-free
operation, please
always use lithium
batteries!
Close the battery
compartment cover and
fix it with the screw.
Your lock is now ready
for use.
4
XL Lock Manager App and on the
Install smartphone (IOS + Android).
Simply scan the QR code with your camera:
After installation, create your XLOCK account
and confirm in the e-mail - > done.
INSTALL THE APP AND CREATE AN ACCOUNT
Attention for Android devices:
For Android devices, the following permissions must be granted without restrictions for
the commissioning of Bluetooth devices: Location and Bluetooth
In retrospect, this is no longer possible with some devices. Then you have to uninstall
and reinstall the app and then restart the device.
For the commissioning of an XLOCK lock, the location and Bluetooth must be activated
in the Android system! 5
CREATE ACCOUNT
1. Tap the button above.
6
2. Enter your email address and
choose a password. To confirm,
password again
type. Tap Register.
3. Verify your account by clicking on the
confirmation link in the XLOCK e-mail in
your e-mail inbox
button. It may be that the confirmation email
has landed in your spam folder.
4. Congratulate! You
have successfully
installed the XL LOCK
Manager app.
ADD NEW LOCK IN YOUR ACCOUNT
1. Tap the button at the
bottom right corner. 2. Tap New Lock.
3. Have XLOCK lock
ready? Press and hold
the reset button with a
screwdriver.
5. Give the lock a
name and tap ADD.
6. The XLOCK lock has now
been successfully linked to
the XLOCK APP and is visible
on the start screen.
4. The lock is displayed
with its ID number. Tap
on the green one to
add your XLOCK.
7
SCHLOSS AUF –UND ZUSPERREN
8
Unlocking with the smartphone and the app is very
simple. A swipe to the right unlocks the lock for 5
seconds. The reading distance is up to 15 meters.
Therefore, the lock can also be installed hidden, e.g.
behind a drawer. The toggle mode (open-close
function) can also be used with the smartphone. This
function is activated and deactivated in the app in the
lock menu.
XLOCK 100 MOUNTING RIGHT
9
Mounting Right Explosion
Mounting right interior view
Mounting the lock
Tighten the screws with feeling and do not use drills or cordless
drill or cordless screwdriver.
XLOCK 100 MOUNTING DRAWING RIGHT
10
Otros manuales para 100
1
Tabla de contenidos
Otros manuales de Cerrar de XLOCK
XLOCK
XLOCK 10 MifareFlex Manual de usuario
XLOCK
XLOCK 142 Manual de usuario
XLOCK
XLOCK 145 Manual de usuario
XLOCK
XLOCK 220 Manual de usuario
XLOCK
XLOCK MifareFlex 40 Manual de usuario
XLOCK
XLOCK 102 Manual de usuario
XLOCK
XLOCK 220 Manual de usuario
XLOCK
XLOCK 186 Manual de usuario
XLOCK
XLOCK 145B Manual de usuario
XLOCK
XLOCK 146 Manual de usuario
