Xiaomi Redmi Watch 2 Lite Manual de usuario
Watch 2 Lite User Manual
Please read this manual carefully before use, and retain it for future reference.
Illustrations of product, accessories, and user interface in the user manual are for
reference purposes only. Actual product and functions may vary due to product
enhancements.
Product Overview
Display Screen
Watch
Heart Rate Sensor
Contact Points
Charging Cable
Function Button
For daily use, comfortably tighten the watch around your wrist about one-finger
width away from your wrist bone. Adjust the strap to ensure the heart rate sensor can
collect data normally.
Note: Wearing the watch too loosely may impact the data collection by the heart
rate sensor.
How to Wear
Download and install Xiaomi Wear/Xiaomi Wear Lite app to better manage your
watch, and log in to your Xiaomi account for more services.
Note: The operations described here might slightly differ from the Xiaomi Wear/
Xiaomi Wear Lite app due to its update, please follow the on-screen instructions.
1. Press and hold the function button to turn on the watch. Scan the QR code
displayed on the watch with your phone, then download and install Xiaomi Wear/
Xiaomi Wear Lite app. You can also download and install the app from app stores,
or scan the QR code below.
2. Open Xiaomi Wear/Xiaomi Wear Lite app, then log in your Xiaomi account. Select
Add device and follow the instructions to add your watch.
Scan the QR code to download the app
Android Device: Xiaomi Wear app / iOS Device: Xiaomi Wear Lite app
How to Connect
When an identical pairing code is displayed on both the phone and the watch, tap
Pair to complete the pairing.
Notes:
During pairing, make sure the Bluetooth is enabled on your phone and the watch is
well connected with your phone.
If the pairing code appears on the watch but not on the phone, please check whether
there is a pairing request in the notifications of the phone.
If the watch cannot be found while adding it to the app, or cannot connect with your
phone during use, please press and hold the function button of the watch for 3 seconds
and choose the reset option to restore factory settings, then try again.
Pairing
1. View notifications: Swipe down from the top on the home screen
2. Open control panel: Swipe up from the bottom on the home screen
3. Switch widget: Swipe left or right when on the home screen page
4. Go back: Swipe from the left edge to the right when on other screen pages
How to Use
The watch supports the Global Position System (GPS) tracking. When you do outdoor
exercises like running, the GPS will automatically start working and notify you when
the positioning is successful, and quit tracking once you stop exercises. The open
field outdoor is the best place for the GPS tracking; whereas when you are in a dense
crowd, raising your arm up can better help GPS to the positioning. It is recommended
to start your workout only when the GPS starts working.
The watch has an Assisted GPS (A-GPS) feature which can accelerate GPS
positioning via the data directly from the GPS satellites. Make sure your watch
is connected with the phone via the Bluetooth, the data can be automatically
synchronized from Xiaomi Wear/Xiaomi Wear Lite app to your watch, and the A-GPS
data automatically updated as well. In case the data has not been synchronized for
seven consecutive days, the A-GPS data will expire. If so, the positioning information
will need to be re-acquired. You can go to the page of outdoor exercises on your
watch to update the positioning information.
GPS & A-GPS
Recharge your watch immediately when the battery level is low. Attach the charging cable
to charge the watch as shown in the illustration.
Note: When the magnetic charging cable is connected to the power, make sure the
conductive substances are not absorbed on it. Otherwise, it may cause a short circuit.
Charging
Adjust the position of the buckle according to the circumference of your wrist. To
install or uninstall the strap, refer to the figures below. You can pull the strap to see if
it is installed securely.
Uninstall the strap: Press down the release button with one hand, and simultaneously
pull out the strap with the other hand.
Install the strap: Align the slot of the strap with the watch and then insert it to the
watch until you hear a click.
Adjust & Install/Uninstall the Strap
Tabla de contenidos
Otros manuales de Mirar de Xiaomi
Xiaomi
Xiaomi MI Watch S1 Pro Manual de usuario
Xiaomi
Xiaomi Smart Band 8 Active Manual de usuario
Xiaomi
Xiaomi Amazfit Manual de usuario
Xiaomi
Xiaomi Mi Band 6 Manual de usuario
Xiaomi
Xiaomi Mi Watch Lite Manual de usuario
Xiaomi
Xiaomi Watch 2 Manual de usuario
Xiaomi
Xiaomi Mi Watch Strap Manual de usuario
Xiaomi
Xiaomi realme TechLife Watch S100 Manual de usuario
Xiaomi
Xiaomi Mi Smart Band 7 NFC Manual de usuario
Xiaomi
Xiaomi Mibro Air Manual de usuario
Xiaomi
Xiaomi Amazfit Pace Manual de usuario
Xiaomi
Xiaomi Redmi Smart Band Pro Manual de usuario
Xiaomi
Xiaomi Mi Band 6 Manual de usuario
Xiaomi
Xiaomi Amazfit GTS Manual de usuario
Xiaomi
Xiaomi Mi Smart Band 4 Manual de usuario
Xiaomi
Xiaomi Smart Band 8 Active Manual de usuario
Xiaomi
Xiaomi Mi Smart Fan Manual de usuario
Xiaomi
Xiaomi Amazfit Bip Lite Manual de usuario
Xiaomi
Xiaomi WATCH S1 Manual de usuario
Xiaomi
Xiaomi Smart Band 5 Manual de usuario
