Xiaomi 4 Go Manual de usuario
CE.04.00.0786.00-E
Original instructions
22
For further information, please go to www.mi.com
For detailed e-manual, please go to www.mi.com/global/service/userguide Electric Scooter 4 Go User Manual
Read this manual carefully before use, and retain it for future reference.
Importer:
Beryko s.r.o.
Pod Vinicemi 931/2, 301 00 Plzeň
www.beryko.cz
02
01
123
Handlebar Front Light Scooter Bell
4Stem
Brake Lever 56Reflector
10
11
12
14
13
15
16
17
18
19
20
1
3
2
4
5
7
6
8
9
7Front Fork
10 Accelerator
8Wheel Motor
11 Control Panel & Power Button
9
12
Charging Port
Bell Lever
Product Overview
13 14 Mudguard
Taillight
15
Quick-release Clamp
16
Clamp Nut
17 Drum Brake
Battery Compartment
19 Kickstand 20
18 Side Reflector
15
6
7
8
2
4
3
04
03
1Speedometer: Display the current speed of the scooter, as well as to display error codes.
2Bluetooth: When this icon lights up, it indicates that the scooter has been successfully connected to the mobile device.
5
4
Modes: is for pedestrian mode; the maximum speed of the scooter is 6 km/h, and the taillight is blinking in this mode. D is for
standard mode, and S for sport mode.
Control Panel & Power Buon: Press the buon to turn the scooter on, and hold the buon for 3 seconds to turn the scooter off. When
the scooter is on, press the buon to turn on/off the headlight and taillight, and press twice to cycle through the modes.
3Temperature Warning:
• When the scooter is not being charged, if the ambient temperature is lower than -10°C or higher than 45°C, the temperature error icon
on the control panel will blink. Riding in such circumstances may result in reduced performance of the scooter and other risks. You
can use the scooter aer the temperature returns to the normal operating range.
• When the scooter is being charged, if the ambient temperature becomes lower than 0°C or higher than 40°C, the temperature error
icon on the control panel will blink and the scooter may become unable to be charged. Continuing charging the scooter may even
pose a risk. When the ambient temperature returns to the range of 0°C to 40°C, the temperature error icon will go out and you can
charge the scooter again.
Control Panel & Power Button 6
7
8Baery Level: The baery power is indicated by 5 bars, each representing approximately 20% of a full baery.
Locking Reminder: When the icon lights up, it indicates that the scooter is locked. You can lock/unlock the scooter via the Mi
Home/Xiaomi Home app.
Error Notification: When the wrench icon displays red, it indicates that the scooter needs repair. When the wrench icon blinks red, it
indicates that the scooter has an error.
6
5
Package Contents
User Manual Specifications and Certifications Important Information
Baery Charger
1Hold the stem and the middle of the deck to place the
scooter on the ground. Then put down the kickstand. 2Lift the stem up, and open the quick-release clamp.
Align the stem with the groove and install it onto the
front fork assembly.
Assembly and Set-up
4Shake the stem before riding to make sure the quick-
release clamp is secured.
3Secure the quick-release clamp firmly after the spring
button pops out.
8
7
Turn the nut on the quick-release clamp counterclockwise or
clockwise to loosen or tighten the clamp.
Adjusting the Quick-release Clamp
Clamp Nut
2
The scooter is fully charged when the LED on the charger
changes from red (float charging) to green (trickle charging).
Charge Your Scooter
When the baery level is under 30% and the scooter is not powered on for about 10 consecutive days, the baery will enter into sleep mode.
If this happens, your scooter cannot be powered on. Please charge it for three seconds to activate the battery.
=
≤30% +≈ 10
12 3
1
10
9
Open the Mi Home/Xiaomi Home app.
2
Scan the QR code to download and install the app.
1
Before being activated, the scooter will keep beeping when
turned on and is limited to 10 km/h. Once the scooter is
activated, the beeping alarm will stop and the speed
restriction will be lifted.
≤ 10 km/h
Note: The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device
should be taken as the default.
Connect with Mi Home/Xiaomi Home app
Tap "+" on the top right corner, and then select "Add a device" or
"Scan".
3
Note: The version of the app might have been updated, please follow
the instructions based on the current app version.
4 Follow the instructions to add and pair the scooter.
Note: The QR code attached on the control panel is
unique to your scooter, please keep this code safe.
.
12
11
How to Ride
1Warning: Wear a helmet, elbow pads and knee pads.
Note: Please check the tire pressure before riding. 2Step on the deck with one foot, and slowly kicks off
the other on the ground.
Watch the tutorial for beginners to activate the scooter.
Note: Do not exit the tutorial before finishing it. Otherwise,
the activation will fail.
5
22KM
0
4
3The accelerator initiates once the coasting speed
exceeds 5 km/h.
Release the accelerator and squeeze the brake lever
for a sudden brake.
6Put down the kickstand when parking.
5Tilt your body to the steering direction as you turn, and
slowly turn the handlebar.
V ≥ 5 km/h
14
13
Safety Reminder
Always steer clear of obstacles.
Watch out for safety risks
Do not press the accelerator when you are
walking alongside the scooter.
Avoid hitting your head on door frames, elevators,
and other overhead obstacles.
Unless otherwise authorized by the local laws, it is
forbidden and illegal to ride on public roads, motorways,
and expressways.
Do not try dangerous actions
Do not hang bags or other heavy stuff on
the handlebar. Do not ride on one foot.
Do not abruptly change the steering direction at
high speed.
16
15
Do not use mobile phone or wear earphones when
operating the scooter.
Do not accelerate when going downhill, and brake
in time to slow down. When on a steep slope, you
need to step off the scooter and push.
Do not try dangerous actions
Do not ride in the rain. Do not ride through puddles
or any other (water) obstacles. Do not ride with anyone else, including children.
Do not keep your feet on the rear mudguard.
Do not try dangerous actions
Do not let go of the handlebar while riding. Do not try riding up or down stairs, nor try
jumping over obstacles.
Do not touch the drum brake.
18
17
Carry Your Scooter
1Put down the kickstand, and open the quick-release clamp.
2
Flip up the kickstand, and simultaneously hold the stem and the
middle of the deck to carry the scooter.
3
Press the spring button and lift up the stem.
Note: This scooter cannot be folded. Please uninstall the stem before carrying the scooter.
Tabla de contenidos
Otros manuales de Scooter de Xiaomi
Xiaomi
Xiaomi Mi Electric Scooter Essential Manual de usuario
Xiaomi
Xiaomi 4 Pro Manual de usuario
Xiaomi
Xiaomi Mi Electric Scooter M365 Manual de usuario
Xiaomi
Xiaomi Smart Air Purifier 4 Manual de usuario
Xiaomi
Xiaomi Mi Electric Scooter M365 Manual de usuario
Xiaomi
Xiaomi Mi Electric Scooter 4 Manual de usuario
Xiaomi
Xiaomi Mi Electric Scooter Manual de usuario
Xiaomi
Xiaomi Mi Smart Air Purifier 4 Lite Manual de usuario
Xiaomi
Xiaomi MI PRO2 Manual de funcionamiento
Xiaomi
Xiaomi Mi Smart Air Purifier 4 Lite Manual de usuario
Xiaomi
Xiaomi Mi Electric Scooter M365 Manual de usuario
Xiaomi
Xiaomi Electric Scooter 4 Ultra Manual de usuario
Xiaomi
Xiaomi Smart Air Purifier 4 Manual de usuario
Xiaomi
Xiaomi Mi Electric Scooter Pro Manual de usuario
Xiaomi
Xiaomi Mi Notebook Pro Manual de usuario
Xiaomi
Xiaomi Mi3 Manual de usuario
Xiaomi
Xiaomi XMCS01TT Manual de usuario
Xiaomi
Xiaomi 4 Pro Manual de usuario
Xiaomi
Xiaomi Mi Electric Scooter 1S Manual de funcionamiento
Xiaomi
Xiaomi Ninebot Mini Manual de usuario
