XGIMI Halo+ Manual de usuario
USER GUIDE
* XGIMI Technology reserves the right to interpret and amend the Instructions.
Please read the Product Instructions carefully before using the product
Thank you for purchasing and using the products of Chengdu XGIMI Technology
Co., Ltd. (hereinafter referred to as "XGIMI Technology" or "XGIMI"). You should
read the Product Instructions carefully before using this product for both your
safety and interests.
XGIMI Technology disclaims all responsibilities for any personal injury, damage
to property, or other loss that may occur as a result of improper or unsafe use of
this product.
About the Product Instructions
(hereinafter referred to as the "Instructions")
The copyright of the Instructions belongs to XGIMI Technology.
Trademarks and names mentioned in the Instructions belong to their respective
right owners.
In case of inconformity between the content of the Instructions and the actual.
product, the actual product shall prevail.
Any objections to any content or clause found within the Instructions should be
reported to XGIMI Technology in written form within 7 days after the purchase
otherwise, it will be assumed that you agree to, understand, and accept all the
content of the Instructions.
Google, Android TV and Chromecast built-in are trademarks of Google LLC.
Google Assistant is not available in certain languages and countries. Availability
of services varies by country and language.
* Model: WM03A
HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc.
Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS
DTS-HD, DTS Studio Sound, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc. in the
United States and other countries. © 2020 DTS, Inc. ALL RIGHTS RESERVED.
1
Auto Keystone
Note: Do not block the sensor to prevent keystone correction failures.
1. Front View
Auto Focus ToF Part
Overview
2
2.Button&input View
3.Bottom View
Open it as a stand
Tripod Socket
3
* Focus is adjusted through add-subtract key when function switch is moved to the right (Focus).
* Volume is adjusted add-subtract key when function switch is moved to the left (VOL).
4.Remote View
Power key
Menu key
Google Assistant
Shortcut keyInput source key
Return key
Function switch
Arrow key
Home key
VOL+(*Adjust Focus +)
VOL-(*Adjust Focus -)
4
5.LED Indicator Guide
Device Off
Flashing Red
Solid Red
Solid Green.
Then Off
Device ON
Off The battery capacity is more than 30%
The battery capacity is less than 30%
Charging.
The battery capacity is less than 90%
The battery capacity is more than 90%
Device Status LED Status DescriptionDevice Button
6.Device Status
Display Off: Only switch off the display. Other parts are still working.
Restart: Restart the device completely.
Hibernate: The device will reboot quickly next time.
Power Off: Switch off the device completely. This mode is suitable for outing. Next
time, press the device's power button twice to power on the device.
5
When you use the device for the first time, the mistouch prevention feature
is enabled. Therefore, press the device's power button twice to power on the
device. We recommend that you connect the device to the power source during
its first-time use.
Getting Started
Device on/off
Device Status
Power Off Power button of the
remote control
Power Off
Hibernate
Hibernate
Power button of the device
Press the device's power button to trigger the
instructions on the screen. Long press the device's
power button as instructed
Press the device's power button to trigger the
instructions on the screen. Short press the device's
power button again as instructed
Press the power button of the remote control and
select an action as instructed on the screen
Action Trigger How to Trigger
Display Off
Press the power button of the
device or the remote control
Press the power button of the
remote control or the device
Power Off
Hibernate
Press the device's power
button twice
This mode is suitable for outing because it
saves the battery life and avoids start-up due
to accidental touch
It consumes little battery. The device will
reboot quickly next time
Only the display is switched off. Other parts
are still working
Device Status How to Enable Description
6
To access the shortcut key function, briefly press the Settings button " "
Remote Control Pairing
Function Description of Remote Control
If pairing fails, after 30s repeat the above steps.
When the function switch at the bottom of the remote control is moved to the
right (Focus), the automatic focus function is enabled. You can adjust the focus
by using the " VOL+/- " button. When the function switch is moved to the left (VOL),
focus adjustment is disabled. You can use the " VOL+/- " button to control the device
volume.
Place the remote control within 10cm of the
device, press" " and " " simultaneously,
an indicator light will begin flashing as the
remote control enters pairing mode. Buttons
can be released as soon as flashing begins,
and the connection is successful when a
"Ding" is heard.
Automatic Focus Adjustment/Remote Focus Adjustment
When the automatic focus adjustment function is enabled, the frame will be
adjusted automatically when you turn on the device or move it to another location.
You can enable automatic focus by using the switch at the bottom of the remote
control. Move the switch to the right (Focus) so that the "VOL+/-" button can be
used to adjust the frame.
Focus adjustment
Shortcut key
7
Automatic keystone correction
When the automatic keystone correction function is enabled, the frame will be
adjusted automatically if you move the device to another location.
When the automatic obstacle avoidance function is enabled, the frame will
automatically avoid obstacles if there are obstacles in the projection area.
When the automatic screen alignment function is enabled, the frame will
automatically match the screen if there is a 16:9 or 16:10 screen in the projection
area.
Press the button on the remote control to enter the "Keystone Correction"
page. Select "Auto Keystone Correction" to enable the automatic keystone
correction function. Select "Manual Keystone Correction" to adjust the four
points and the size of the frame.
8
Google Assistant
Bluetooth Speaker
Talk to Google to control your TV using your voice.
Press the Google Assistant button on your remote to search for movies and
shows, get recommendations to match your mood, get answers, control smart
home devices, and more.
Use mobile Bluetooth settings to search for "XGIMI Halo+" to pair with the
device and play songs.
Chromecast Built-inTM
Easily cast your favorite movies, music, and more to your TV with Chromecast
built-in.
Simply tap the Cast button from apps you already know and love to stream
entertainment from your phone, tablet or laptop to the TV. While you’re
streaming, you can keep using your phone for other things- scroll through
social media, send a text, and even accept calls.
9
Otros manuales para Halo+
1
Tabla de contenidos
Otros manuales de Proyector de XGIMI
