Xerox WorkCentre M24 Color Instrucciones de montaje
Port Setup
Follow this procedure if you want to make any changes to the Port Settings.
If no changes are re-
quire, continue on Step 3.
1. Press “Access” button on the User Interface Control Panel.
2. Enter “System Administrator” Password. (Default – 11111)
3. Press “Confirm”
4. Press “System Settings”
5. Press “System Settings”
6. Press “Network Settings”
7. Select “Port Settings”
8. Select desired Port.
9. Select “Change Settings”
10. Follow Screen instructions to modify the port setting.
11. Select “Close” to return to the “Network Settings” screen and continue with item 7 in Step 3 “Protocol Setup”.
12. If no further changes are required, continue to select “Close” to exit the System Setup.
13. Continue on Step 4.
Purpose: Refer to this guide to modify the printer network settings at the printer user interface screen if required. For complete instructions
refer to the Customer Documentation CD.
Note: A Network Administrator is required to ensure that the printer is configured properly.
To properly configure the printer, the Network Administrator must supply an IP Address, a Subnet Mask, and a Gateway Address if applicable.
For information to configure the printer on a Novell network refer to the System Administration Guide in the Customer Documentation CD.
Procedure: The WorkCentre M24 has been designed to connect to most networks with minimal changes. Connect the printer to the network
and review the Default Printer Settings. Continue with Steps 2-6 and make changes to the printer port / network settings if required to enable it
on your
network.
- These are the Default Printer Settings
Default Port Settings Default Network Settings
Parallel—Enabled IP Address: Get IP Address (DHCP)
LPD—Enabled Printer Name: FX-0D9496
Netware—Disabled Workgroup: “WORKGROUP”
SMB—Enabled Print Queue: fx-0d9496
IPP—Enabled
Ethertalk—Enabled
Salutation—Enabled
Port 9100—Enabled
SNMP—Enabled
FTP Client—Enabled
Internet Service—Enabled
IP Protocol Setup
Auto IP (DHCP) - No Action required
Follow this procedure if you want to make any changes to the Protocol Settings. If no changes are require, continue on Step 4.
Static IP Configuration
1. Press “Access” button on the User Interface Control Panel.
2. Enter “System Administrator” Password. (Default – 11111)
3. Press “Confirm”
4. Press “System Settings”
5. Press “System Settings”
6. Press “Network Settings”
7. Press “Protocol Settings”
8. Select setting to be changed.
9. Select “Change Settings”
10. Make desired changes
11. Press “Save”
12. Repeat steps 8-11 to make any other changes.
13. Select “Close” to exit.
Print a Settings List
1. Press “Machine Status” button on the User Interface Control Panel.
2. Select Billing Meter / Print Report
3. Select “Print Report / List”
4. Select “Print Mode Settings”
5. Select “Settings List (Common Items)”
6. Press “Start” Button to print a Settings List.
7. Refer to Sample Settings List on opposite page.
Web User Interface Instructions
A PC client connected to the network is required to complete the printer network set-up.
Follow this procedure if you want to make any other changes to the printer configuration.
Procedure
1. Open a web browser (Internet Explorer)
2. Verify that Proxy Servers are being bypassed for local web addresses.
3. Type the TCP/IP address assigned to the printer in the URL window. (Refer to the Settings List for the TCP/IP Address)
4. Select “Properties” Tab.
5. Make desired changes.
Note: Default User Name: admin / Default Password: admin
6. Reboot print server.
7. Print a new Settings List.
Sample
Settings List
Page
Communication Settings
Ethernet Setting
Connection Type Auto
Mac Address 08:xx:xx
TCP/IP
Get IP Address From DHCP / Manual
IP Address xxx.xxx.xxx.xxx
Subnet Mask xxx.xxx.xxx.xxx
Gateway Address xxx.xxx.xxx.xxx
Print Driver Installation information for printing using LPR
Load Print Drivers
Win 95 / 98 / Me
Requires third party Print Utility (Spooler) software to en-
able the creation of an LPR Port.
Windows NT
Add Printer wizard
Add LPR Port
Server Name or Address – Refer to IP Address on the
Settings List.
Name of Printer or Print Queue—”raw”
Windows 2000
Add Printer wizard
Local Printer
Create new port—LPR Port
Server Name or Address – Refer to IP Address on the
Settings List.
Name of Printer or Print Queue—”raw”
Windows XP
Add Printer wizard / Select Local Printer
Create New Port—Standard TCP/IP Port
Server Name / Address – Refer to IP Address on the Settings List.
Select Generic Network Card.
To install software select “Have Disk” and browse to CDROM / WinXP
drivers folder.
Follow screen instructions to complete installation.
SMB
Port Status Enabled
Print Mode Auto
PJL Enabled
Transport Protocol TCP/IP, NetBEUI
TBCP Filter Disabled
Workgroup WORKGROUP (Default)
Host Name FX-0D9496 (Default)
Auto Driver Download Enabled
Auto Master Mode On
Encript Password On
Print Driver Installation for Netware
Refer to the System Administration Guide in the User Documentation CD for complete instructions on loading drivers.
Print Driver Installation information for printing using AppleTalk
Printer Type: Adobe PS
Printer Name: WorkCentre M24
PPD Selection – Double-click the appropriate file in the MAC folder of the Driver
Software CD.
Use AdobePS Inst - 8.7.3 for OS 8.6 or later.
Use AdobePS Inst - 8.7.0 for OS 8.5
Use AdobePS Inst - 8.5.1 for OS 7.1 through 8.1
Follow the on-screen instructions, click “Install”, and restart workstation when prompted.
Open Chooser, select Adobe PS printer, and locate your printer in the displayed list.
Click “Create” for initial installations or “Setup” for all subsequent installations
Click “Select PPD”, highlight your Printer’s PPD, and click “ok”.
For Macintosh OSX
Double-click the MacOSX folder and copy the “.hqx file” to the desktop. Double-click the file to “un-stuff” it. Double-click
the installer file and follow the easy install instructions to install the printer software. Open the Print Center and click “Add
Printer” and follow the instructions to complete the installation.
Refer to the System Administration Guide in the User Documentation CD for complete instructions on loading drivers.
Print Driver Installation information for printing using SMB
Add Printer wizard
Network Printer
Browse Network for printer: Refer to the Settings List for workgroup / printer name.
For Client Server browse network for server / Queue.
Print Queue: “Printer Name”-p (Default: fx-0d9496-p)
For complete instructions on setting up the Printer in a Net BIOS over IP environment (also known as SMB), refer to the Sys-
tem Administration Guide in the User
Documentation CD.
Otros manuales para WorkCentre M24 Color
12
Tabla de contenidos
Otros manuales de Impresora de Xerox
Xerox
Xerox 721P85530 Instrucciones de funcionamiento e instalación
Xerox
Xerox DocuPrint P8EX Manual de usuario
Xerox
Xerox VersaLink B600 Manual de funcionamiento
Xerox
Xerox 6125N - Phaser Color Laser Printer Manual de usuario
Xerox
Xerox Synergix 8825 Guía de inicio rápido
Xerox
Xerox Phaser 7750 Manual de usuario
Xerox
Xerox Phaser 4500 Manual de instalación y operación
Xerox
Xerox 8200B - Phaser Color Solid Ink Printer Manual de usuario
Xerox
Xerox Phaser 7800 Manual de usuario
Xerox
Xerox 3150 - Phaser B/W Laser Printer Manual de usuario
Xerox
Xerox Phaser 200I Manual de usuario
Xerox
Xerox 4400DT - Phaser B/W Laser Printer Manual de usuario
Xerox
Xerox 6180N - Phaser Color Laser Printer Manual de programación
Xerox
Xerox Phaser 7300B Guía de referencia rápida
Xerox
Xerox Phaser 6120 Manual de usuario
Xerox
Xerox VersaLink C600 Manual de usuario
Xerox
Xerox Phaser 4510 Manual de usuario
Xerox
Xerox Phaser 7100 Manual de usuario
Xerox
Xerox Phaser 7300B Manual de usuario
Xerox
Xerox Color C60 Series Manual de usuario
