Xerox PHASER 6250 Instrucciones de instalación y mantenimiento

Phaser® 6250 Color Laser Printer

3-2

Connections and IP Address

This topic includes:

■"Printer Setup" on page 3-2

■"Ethernet Connection (Recommended)" on page 3-2

■"USB Connection" on page 3-4

■"Parallel Connection" on page 3-5

Printer Setup

Ethernet Connection (Recommended)

An Ethernet connection is recommended because it is faster than either a USB or Parallel cable

connection. It also allows the user direct access to CentreWare IS.

Network Connection

Use an Ethernet connection with two twisted-pair (Category 5/RJ-45) cables and an Ethernet

hub. Connect the computer to the hub with one cable, then connect the printer to the hub with

the second cable. Connect to any port on the hub except the uplink port. TCP/IP and EtherTalk

are the most common protocols used with Ethernet cables. To print using TCP/IP, each

computer and printer requires a unique IP address. Go to “Setting an IP Address” in this

section.

Standalone (Cable or DSL) Network Connection

For information about setting up a cable or DSL connection for your printer, go to

www.xerox.com/officeprinting/infoSMART to view Document # 33188, entitled Basic TCP/

IP Tutorial and Home Networking Guidelines.

Setting an IP Address

If your computer is on a large network, contact your network administrator for the appropriate

TCP/IP addresses and additional configuration information.

If you are creating your own small Local Area Network or connecting the printer directly to

your computer over Ethernet, follow the procedure for automatically setting the printer’s IP

address.

The printer and computer(s) must have unique IP addresses. It is important that the addresses

are similar, but not the same. For example, your printer can have the address 192.168.1.2 while

your computer has the address 192.168.1.3. Another device can have the address 192.168.1.4.

The information in this section is also stored as an information page in your printer.

Use the front panel to quickly print this information in the future.

Connections and IP Address

Phaser® 6250 Color Laser Printer

3-3

For more information, go to www.xerox.com/officeprinting/infoSMART to view Document

# 18545.

Automatically Setting the Printer’s IP Address

Use the Phaser installer on the Printer Installer and Utilities CD-ROM to detect and/or assign

an IP address to your printer. For further instructions, insert the Printer Installer and Utilities

CD-ROM into your computer’s CD-ROM, launch the installer, then follow the prompts for

installation.

Note

For the automatic installer to function, the printer must be connected to a TCP/IP network.

Manually Setting the Printer's IP Address

1. At the printer's front panel, select Printer Setup, then press the OK button.

2. Select Connection Setup, then press the OK button.

3. Select Network Setup, then press the OK button.

4. Select TCP/IP Setup, then press the OK button.

5. Select DHCP/BootP, then press the OK button to select Off.

6. Select TCP/IP Address, then press the OK button.

7. Enter your printer’s IP address, then press the OK button.

Setting a Static IP Address on Your Computer

Windows 2000, Windows XP, and Windows Server 2003

1. On the desktop, right-click My Network Places, then click Properties.

2. Right-click Local Area Connection, then click Properties.

3. If you do not have TCP/IP available, click Add, then click Protocol.

4. Click Add, then click Internet Protocol TCP/IP.

5. Select the General tab, select the TCP/IP protocol for your network card, then click

Properties.

6. Select the General tab, then click Use the following IP address.

7. Enter an IP address and Subnet mask, then click OK.

8. If prompted, click OK to restart Windows .

Windows NT 4.x

1. On the desktop, right-click Network Neighborhood, then click Properties.

2. On the Protocols tab, click TCP/IP Protocol, then click Properties.

3. Select the IP Address tab, then click Specify an IP Address.

4. Enter an IP Address and Subnet mask, then click OK.

5. If prompted, click OK to restart Windows.

Connections and IP Address

Phaser® 6250 Color Laser Printer

3-4

Windows 98 and Windows Me

1. On the desktop, right-click Network Neighborhood or My Network Places, then click

Properties.

2. On the Configuration tab, select the TCP/IP protocol for your network card, then click

Properties.

3. Select the IP Address tab, then click Specify an IP address.

4. Enter an IP address and Subnet mask, then click OK.

5. If prompted, click OK to restart Windows.

Macintosh 9.x TCP/IP

1. Click the Apple icon, then select the Controls Panel folder.

2. Double-click TCP/IP, then verify that Ethernet is the connection type.

3. Enter an IP address and Subnet mask, then click OK.

4. If prompted, click OK to restart.

Macintosh OS X (10.1 and higher) TCP/IP

1. Click the Apple icon, click System Preferences, then click the Network icon.

2. In the Network control panel, click the TCP/IP tab.

3. Under Location, click Automatic.

4. Under Show, click Built-in Ethernet.

5. Under Configure, click Manually.

6. Enter the IP Address, Subnet Mask, and Router (Gateway).

7. Click Apply Now to activate the changes.

USB Connection

The USB connection requires a standard USB cable. This cable is not included with your

printer and must be purchased separately. Verify that you are using the correct USB cable for

your connection.

Windows 98 or Later and Windows 2000 or Later

Connect the USB cable to the PC and follow the Add New Hardware Wizard to create the

USB port. Follow the Add Printer Wizard to install the printer driver from the Printer

Installer and Utilities CD-ROM. For more information go to www.xerox.com/officeprinting/

infoSMART to view these documents:

■Windows 98: Document # 18215

■Windows 2000: Document # 22701

■Windows XP: Document # 53543

Connections and IP Address

Phaser® 6250 Color Laser Printer

3-5

Macintosh (OS 9.0.4 and Higher)

A USB-connected printer does not display in the Chooser. Install the printer driver from the

Printer Installer and Utilities CD-ROM. Use the Desktop Printer Utility (version 1.2 or later)

to create a desktop USB printer. The utility is located in the PhaserTools folder which is

created during the software installation. For more information go to www.xerox.com/

officeprinting/infoSMART to view Document # 33225.

Macintosh (OS X and Higher)

1. Install the printer driver from the Printer Installer and Utilities CD-ROM.

2. Open the Print Center Utility. (On the Macintosh hard drive, open the Applications

folder, then open the Utilities folder.)

3. Click the Add button.

4. Select USB from the top drop-down list.

5. Select the printer in the printers window.

6. Select Xerox from the list of manufacturers in the drop-down list.

7. Select the appropriate printer model from the list of available printers.

8. Click the Add button.

The printer is displayed as an available printer in the Print Center. For more information, go

to www.xerox.com/officeprinting/infoSMART to view Document # 49355.

Parallel Connection

Use an IEEE 1284 parallel printer cable–maximum length 10 feet (3 meters)–to connect your

computer’s and printer’s parallel ports. Install the printer driver from the Printer Installer and

Utilities CD-ROM. Select the appropriate LPT parallel port.

Connection Setup

Installing the Printer Driver

To download the latest printer drivers, go to www.xerox.com/officeprinting/support.

Windows 98 or Later and Windows 2000 or Later

Install the printer driver from the Printer Installer and Utilities CD-ROM. The Printer

Installer and Utilities CD-ROM automatically installs and identifies the printer during the

installation process. For more information go to www.xerox.com/officeprinting/infoSMART

to view these documents:

■Windows 98 and Windows Me: Document # 9840

■Windows 2000, Windows XP, and Windows Server 2003: Document # 36894

■Windows NT: Document # 11338

Connections and IP Address

Phaser® 6250 Color Laser Printer

3-6

Macintosh EtherTalk

If you use EtherTalk, Macintosh computers do not require IP addresses.

1. Open the AppleTalk Control Panel.

2. Verify that the Ethernet port is the selected network port.

3. Double-click the installer on the Printer Installer and Utilities CD-ROM to install the

printer driver.

4. Open the Chooser, then click the LaserWriter driver.

5. From the right column of the Chooser, select the printer, then click Create to create the

desktop printer.

For more information go to www.xerox.com/officeprinting/infoSMART to view Documents

# 2562 and # 1886.

Macintosh OS X (10.2 and Higher)

1. Install the printer driver from the Printer Installer and Utilities CD-ROM.

2. Open the Print Center Utility. (On the Macintosh hard drive, open the Applications

folder, then open the Utilities folder.)

3. Confirm that the drop-down list is set to Rendezvous.

4. Select the printer in the printers window.

5. Click the Add button.

Macintosh OS X (10.1 and Higher)

Macintosh OS X supports TCP/IP as the default protocol, as well as AppleTalk. For a TCP/IP

installation, follow the instructions provided to set an IP address in the printer.

1. Open the Print Center Utility. (On the Macintosh hard drive, open the Applications

folder, then open the Utilities folder.)

2. Click the Add Printer button.

3. Choose the connection type you desire.

■For LPR, enter the IP address of the printer that you set previously. The Queue Name

field remains blank if the Use default queue on server box is checked (by default).

Other options are PS or AUTO. Select the appropriate PPD for the printer model

under the Printer Model drop-down list.

■For AppleTalk, select the appropriate printer from the list that is displayed. The

configuration process continues until configuration is complete. If AppleTalk is not

available in the Print Center drop-down list, the AppleTalk protocol is disabled and

must be installed on the Macintosh. If the AppleTalk protocol is enabled, but is not

available in the drop-down window, it is recommended that you contact your system

administrator or Apple Computer Incorporated for assistance.

For more information go to www.xerox.com/officeprinting/infoSMART to view Documents

# 48704, # 50080, and # 49814.

Connections and IP Address

Phaser® 6250 Color Laser Printer

3-7

Dynamic Methods of Setting the Printer’s IP Address

An Internet Protocol (IP) address is required to identify your printer on a network. Set the

printer’s IP address by any of the following methods:

■DHCP

■CentreWare Internet Services

■Auto IP (Host Names)

Enabling DHCP on the Printer

Verify that the printer’s DHCP protocol is enabled by setting the front panel or using

CentreWare IS.

Note

To determine your printer’s IP address, select Printer Identification at the front panel.

For information about the front panel, go to Reference/Features on the User

Documentation CD-ROM.

Changing or Modifying the IP Address Using CentreWare Internet Services (IS)

CentreWare IS is a printer administration and support tool using web technology. With

CentreWare IS software, you can access printer status and manage your printer over a TCP/IP

network using a web browser. For more information, go to Explore/CentreWare IS on the User

Documentation CD-ROM.

After setting the printer’s IP address, you can modify the TCP/IP using CentreWare IS.

1. Launch your web browser.

2. Enter your printer's IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Properties on the left side of the printer’s main CentreWare IS page.

4. Open the Protocols folder, then click TCP/IP.

5. Enter or modify your printer’s settings, then click Save Changes at the bottom of the page.

Using Host Names with the Domain Name Service (DNS)

The printer supports DNS through an embedded DNS resolver. The DNS resolver protocol

communicates with one or more DNS servers to resolve the IP address for a given host name

or the host name for a given IP address.

Information Required for IP Addressing

Information Comments

Internet (IP) address for the printer Format is xxx.xxx.xxx.xxx, where xxx represents

a decimal number from 0–255.

Network Mask If you are unsure, leave this blank; the printer

chooses an appropriate mask.

Default Router/Gateway address If you want to communicate with the printer from

anywhere other than the local network segment,

you need the router address.

Connections and IP Address

Phaser® 6250 Color Laser Printer

3-8

To use an IP host name for the printer, the system administrator must configure one or more

DNS servers and a local DNS domain name space database.

To set up the printer for DNS, supply a maximum of two DNS name server IP addresses. There

are two ways to set up the printer:

■TCP/IP–Go to “DNS Setup Using CentreWare Internet Services.”

■DHCP–Go to “Dynamic Domain Name Service (DDNS).”

DNS Setup Using CentreWare Internet Services

Set up the printer for DNS using CentreWare IS after setting the printer’s IP address.

1. Launch your web browser.

2. Enter your printer's IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Properties on the right side of the printer’s main CentreWare IS page.

4. Open the Protocols folder and click TCP/IP.

5. In the DNS Settings section, enter your domain server’s IP address in these fields:

■Primary Name Server IP Address (required)

■Second Name Server IP Address (optional)

6. Click Save Changes when you are finished entering the settings.

Dynamic Domain Name Service (DDNS)

This printer supports Dynamic DNS through DHCP. You must have DHCP enabled on the

printer for DDNS to function. Your network’s DHCP server must also support Dynamic DNS

updates through option 12 or option 81 support. See your network administrator for details.

1. Launch your web browser.

2. Enter your printer's IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Properties on the right side of the printer’s main CentreWare IS page.

4. Open the Protocols folder and click TCP/IP.

5. In the BOOT/DHCP Settings section, set the BOOTP/DHCP option to ON.

6. To enable DDNS, enter the following DDNS/WINS settings information:

■DDNS - Set to ON.

■Release Host Name - Set to NO.

■DDNS/WINS Name - Use the default name provided by Xerox or enter another name.

■Primary WINS Server (optional)

■Secondary WINS Server (optional)

7. Click Save Changes when you are finished entering the settings.

Other Resources

For more information about network setup and troubleshooting, go to Reference/Connections

& Networks on the User Documentation CD-ROM.

Otros manuales para PHASER 6250

Tabla de contenidos

Otros manuales de Impresora de Xerox

Xerox

Xerox 7700 Manual de usuario

Xerox

Xerox DocuPrint CM205 b Manual de usuario

Xerox

Xerox Phaser 6500 Manual de funcionamiento

Xerox

Xerox 5400DX - Phaser B/W Laser Printer Manual de usuario

Xerox

Xerox DocuPrint C621 Manual de usuario

Xerox

Xerox Phaser 750 Manual de usuario

Xerox

Xerox 7760DN - Phaser Color Laser Printer Manual de usuario

Xerox

Xerox 3500B - Phaser B/W Laser Printer Manual de usuario

Xerox

Xerox Phaser 860 Manual de usuario

Xerox

Xerox Phaser 360 Manual de instrucciones

Xerox

Xerox PHASER 6130 Manual de usuario

Xerox

Xerox 8254E Manual de usuario

Xerox

Xerox DocuPrint 4850 NPS Guía de instalación

Xerox

Xerox VersaLink C600 Manual de usuario

Xerox

Xerox Phaser 740 Manual de usuario

Xerox

Xerox DocuPrint XJ6C Manual de usuario

Xerox

Xerox Nuvera 100 Manual de usuario

Xerox

Xerox PHASER 6010 Manual de usuario

Xerox

Xerox Phaser 6300 Guía de instalación y uso

Xerox

Xerox Phaser 8560 Manual de funcionamiento

Xerox

Xerox DocuTech 6180 Guía de instalación

Xerox

Xerox 4213 Manual de usuario

Xerox

Xerox 3500N - Phaser B/W Laser Printer Manual de usuario

Xerox

Xerox Phaser 7750 Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario