Xerox 8142 Manual de usuario

Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting

Reference Guide 8142/8160

Xerox8142/8160

WideFormatColorSolution

PrinterReferenceGuide

XEROX is a registered trademark of Xerox Corporation.

Other trademarks are the property of their respective owners.

Except as provided below, no part of this manual may be copied or distributed,

transmitted, transcribed, stored in a retrieval system, or translated in any human

or computing language, in any form or by any means, electronic, mechanical,

magnetic or otherwise, or disclosed to a third party without the express written

permission of Xerox Corporation, Stamford, CT. U.S.A.

Certain manuals are distributed by Xerox Corporation in an electronic format on

CD-ROM or over the internet. The registered user of a Xerox product whose

manuals are distributed in this fashion may print one copy for their personal use

only.

Revision History

Rev.A June 2004

Rev. B May 2005

Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting

Reference Guide 8142/8160

The United States Federal Communications Commission has specified that the following notice be brought to the attention of users of

Xeroxprinters.

FEDERALCOMMUNICATIONSCOMMISSIONRADIOANDTELEVISIONINTERFERENCEFORCLASSADEVICE

Statement

This equipment has been tested and found to comply with the limits for a ClassAdigital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

UserInstructions:

If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on

and off, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Xerox could void the user’s authority to operate the equipment.

Note: This product was FCC certified under test conditions that included the use of shielded I/O cables and connectors between

system components. To be in compliance with FCC regulations, the user must use shielded cables and connectors and install them

properly.

FCC Statement (U.S.A.)

Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting

iii

Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting

Reference Guide 8142/8160

VDE statement

Hiermit wird bescheinigt, daß der Drucker in Übereinstimmung mit den Bestimmungen der BMPT-AmstbIVfg

234/1991 funkentstört ist. Der vorschriftsmäßige Betrieb mancher Geräte (z.B. Meßsender) kann allerdings

gewissen Einschränkungen unterliegen. Beachten Sie deshalb die Hinweise in der Bedienungsanleitung.

Dem Zentralamt für Zulassungen im Fernmeldewesen würde den Inverkehrbringen dieses Gerätes angezeigt und

die Berechtigung zur Überprüfung der Serie auf die Einhaltung der Bestimmungen eingeräumt.

Die arbeitsplatzbezogene Geräuschemission des Gerätes beträgt 70 dB(A).

Industry Canada

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regula-

tions.

Cet apparell numérique de la classe A respecte toutes les exigences du Réglement sur le matériel brouilleur du

Canada.

Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting

Reference Guide 8142/8160

Safety

Material safety data sheet

To obtain information on the proper use, handling, and disposal of any Xerox ink, consult the material safety data

sheet included in the ink kit or obtain a copy from Xerox at:

Xerox Corporation

Stamford, CT

International users should contact their local dealer or distributors.

General operating safety

The use of a <HAR> cord set (rated 10A, 250VAC) with the proper plug configuration for the country where

the device will be used, is required for continued safety compliance.

Ein harmonisiertes (<HAR>) Netzkabel (min. 10A, 250V~) mit dem vorgeschriebenen Netzstecker für das

entsprechende Land in dem das Gerät installiert wird, ist unbedingt notwendig für die elektrische Sicherheit.

El uso de cable poder <marcado HAR> (capacidad de 10A, 250V~), con el enchufe apropiado para el país donde

se use el producto, es requerido para acatamiento de seguridad eléctrica.

L' emploi d' un cordon surmoulé <HAR> (estimé 10A, 250V CA) avec la configuration de la fiche convenable

pour le pays où l' appareil sera utilisé, est exigé pour la conformité à la sécurité continuée.

For your safety

Always unplug the printer before servicing it.

Safety

Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting

Reference Guide 8142/8160

Manual conventions

Indicates a procedure for you to follow in order to perform a specific function.

Read the accompanying explanatory text before following the step-by-step procedure.

!Indicates a warning. Ignoring the warning can damage the printer or result in an unsatisfactorily printed

image.

Other reference materials

Inaddition to this guide, thefollowing additionaldocumentation is included with yourprinter:

Quick Start Guide - Tells you how to attach the printer stand, load media, install cartridges, and connect the

printer to your computer.

CD-ROM - contains the following:

Documents

Quick Reference Guide

Reference Manual

Maintenance Guide

Applications

Xerox 8142/8160 Software Suite

EFPU

Windows 98/NT/2000/ME/XPDrivers

ICC color profiles

Sample Files

Conventions and References

Introduction Printer Options Menu Tree Technical Info Error Messages Troublesho

Introduction1-1

Introduction 1

Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting

Reference Guide 8142/8160

This Reference Guide describes the Xerox 8142/8160 Wide Format Color Solution printer and its menu functions. In this

chapter you will find an overview of the printer and steps for calibrating the printer after it is installed. Refer to the Quick

Start Guide for setup instructions and the Maintenance Guide for maintenance information.

The printer is a wide-format color inkjet printer that gives you professional-quality output on a wide variety of media using

either dye or pigment-based Xerox inks. Designed specifically for the needs of graphics professionals who need high

productivity, this printer offers six print heads, improved drying technology, and automated ink line fill and cartridge clean-

ing for "clean hands" operation. The printer is network-ready so that it can be shared by an entire office. Job tracking and

cost accounting software provide instantaneous statistics for billing, media and ink status, and project management.

Introduction Printer Options Menu Tree Technical Info Error Messages Troublesho

Introduction1-2

Introduction 1

Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting

Reference Guide 8142/8160

Printing

The printer accepts raster-oriented data in the format of HP RTL. In this mode, printing begins immediately after

the first complete line of HP RTL data is received.

There are many Raster Image Processors (RIPs) which convert Postscript or CGM to HP RTL. When choosing a

RIP or a file format converter for output to the printer, make sure it has the features you need. (Contact your

Xerox distributor or dealer for an up-to-date listing.) If your applications do not support HP RTL, there are several

software utilities available to convert various raster file formats (TIFF, GIF, BMP, etc.) into HP RTL.

Obtaining quality results

You have probably seen a demonstration of your printer's capabilities or sample output.

If so, you are aware of the superb color graphics which can be obtained. Note, how-

ever, that to obtain high-quality results, you must consider several factors. Follow the

simple guidelines in the sections that follow to obtain excellent results.

Use the right inks and media

Your printer features six thermal ink cartridges with 640 jets each. Reservoirs hold

up to 700 ml of ink. You can print with six colors of ink (CMYK, MLand CL)

which create a combination of color gamut and smooth tonal gradations for your

most challenging applications. Note: in the calibration patterns, the MLand CL

cartridges are referred to as M1 and C1.

Ink sets for the 8142/8160 include dye and pigment offerings. Xerox ink sets

offer optimized, matched and quality ink solutions. Every ink formula is

scientifically designed to obtain the best performance possible in the printer

for which it is created. Extensive testing under a variety of extreme

environmental and production conditions ensures the ink performs consis-

tently.

When Xerox inks are used with Xerox Wide Format Inkjet Media, you receive industry-leading

performance guarantees that ensure customer satisfaction.

Introduction Printer Options Menu Tree Technical Info Error Messages Troublesho

Introduction1-3

Introduction 1

Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting

Reference Guide 8142/8160

Caring for your ink and cartridges

• Handle cartridges only on the plastic areas.Touching the copper electrical inter-

connect or the inkjets can damage the cartridge.

• Use only dye or pigment ink intended for this printer. Do not mix inks.

• Do not shake ink refill containers.

• Store ink and cartridges in the same environment as the printer whenever possible.

• If you remove a cartridge from the printer, do not leave it exposed to the air for an extended period because the jets

may clog. Replace the original tape on the jet plate. Place the cartridge in a cartridge garage or sealed plastic bag and

store it in a closed area at room temperature. Keep it out of direct sunlight.

• Open new cartridges only when you are ready to install them.

• Use only Xerox-brand ink refills and cartridges.

•When you receive a "Low Ink" warning, there is approximately 15-20 minutes of printing time remaining before

the intermediate reservoir runs out of ink.

Note: When an ink bottle is removed, you have 30 seconds to put in another bottle before the printer senses the

bottle's absence and places the printer in Pause mode.

Choose the right media

This printer is designed to print on a wide variety of media including photo gloss, backlit film, matte, self-

adhesive vinyl, canvas, banner tyvek, and more. Refer to the list of compatible media included with your

printer.

Introduction Printer Options Menu Tree Technical Info Error Messages Troublesho

Introduction1-4

Introduction 1

Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting

Reference Guide 8142/8160

Caring for your media

Store media in its original packaging in a cool, dry area until you are ready to use it. The

environment should be stable; i.e., no extremes of heat and cold, and non-condensing

humidity. If conditions are outside the operating ranges recommended for the printer, allow

the media to acclimate in the operating environment for at least 48 hours before using it.

If you remove a roll of media from the printer, be sure to store it in a manner which

keeps it clean and dust-free. Ideally, you should return it to its original packaging for

storage.

Print on the correct side! Roll media is wound with the printable side out.

Handle with care! Handle your media carefully to avoid creases, scrapes, and

tears.Avoid crushing or damaging roll media edges.

Caution! Some medias use an adhesive to adhere the end of the media to the

core. This adhesive can transfer onto rollers in the media feed path. Abuildup of

this adhesive can cause banding and other imperfections in your printed output.

To avoid this, it is recommended that you always cut the media before the end

of the roll.

Introduction Printer Options Menu Tree Technical Info Error Messages Troublesho

Introduction1-5

Introduction 1

Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting

Reference Guide 8142/8160

Loading media

The procedure for loading media is shown in the Quick Reference Guide. If you are using paper rolls with a core

diameter of 3", it will be necessary to install a core adapter on the roller before installing the roll of media as shown

below. Be sure to orient the media as shown below.

Otros manuales para 8142

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora de Xerox

Xerox

Xerox Phaser 7800 Manual de servicio

Xerox

Xerox DocuPrint C15 Manual de usuario

Xerox

Xerox 3500B - Phaser B/W Laser Printer Manual de usuario

Xerox

Xerox Phaser 5550 Manual de usuario

Xerox

Xerox 7400DXF - Phaser Color LED Printer Manual de servicio

Xerox

Xerox 3117 - Phaser B/W Laser Printer Manual de usuario

Xerox

Xerox VersaLink C400 Manual de usuario

Xerox

Xerox DocuPrint N4525 Manual de usuario

Xerox

Xerox PHASER 6250 Manual de usuario

Xerox

Xerox VersaLink C500 Manual de funcionamiento

Xerox

Xerox 3107 Manual de instrucciones

Xerox

Xerox DocuPrint 4508 Manual de usuario

Xerox

Xerox VersaLink C600N Manual de usuario

Xerox

Xerox DocuPrint N24 Manual de usuario

Xerox

Xerox DocuTech 6155 Manual de usuario

Xerox

Xerox Phaser 6140N Manual de instrucciones

Xerox

Xerox DocuPrint N2025 Manual de servicio

Xerox

Xerox Phaser 7750 Manual de usuario

Xerox

Xerox PHASER 340 Manual de usuario

Xerox

Xerox 6130N - Phaser Color Laser Printer Manual de instalación y operación

Xerox

Xerox 3130 - Phaser B/W Laser Printer Manual de usuario

Xerox

Xerox DocuPrint XJ6C Manual de instrucciones

Xerox

Xerox DocuPrint C3055 DX Manual de usuario

Xerox

Xerox Phaser 7400 Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario