Xerox 4850 HighLight Color Manual de usuario

XEROX

Xerox 4850/4890 HighLight Color

Laser Printing Systems

Message Guide

Version 5.0

November 1994

720P93620

Xerox Corporation

701 S. Aviation Boulevard

El Segundo, CA 90245

copyrightable material and information now allowed by statutory

or judicial law or hereinafter granted, including without limitation,

material generated from the software programs which are

displayed on the screen, such as icons, screen displays, looks,

etc.

Printed in the United States of America

Publication number: 720P93620

Xerox® and all Xerox products mentioned in this publication are

trademarks of Xerox Corporation. Products and trademarks of

other companies are also acknowledged.

Changes are periodically made to this document. Changes,

technical inaccuracies, and typographic errors will be corrected in

subsequent editions.

This document was created on the Xerox 6085 Professional

Computer System using VP software. The typefaces used are

Optima, Terminal, and monospace.

Table of contents

Introduction v

Conventions v

1. COMPRESS (CP) command messages 1-1

2. Data Capture Utility (DCU) messages 2-1

System failure or reload messages 2-6

3. Disk Save and Restore (DSR) messages 3-1

4. File Conversion Utility (FCU) messages 4-1

5. General floppy utility (FLF) messages 5-1

FLF messages 5-15

6. Forms compilation (FD) messages 6-1

7. Host Interface Processor (HIP) messages 7-1

8. Interpress font utility (IFU) messages 8-1

9. Operating system software (OSS) messages 9-1

OS level 0: Confirmation messages 9-1

OS level 1: Informational messages 9-10

OS level 2: Routine maintenance messages 9-41

OS level 3: Printer problem messages 9-66

OS level 4: System or tape problem messages 9-71

OS level 6: Job integrity problem messages 9-75

OS level 7: System problem messages 9-96

OS level 8: Probable severe software errors 9-101

OS level 9: Probable severe hardware errors 9-107

10. Job source library compilation (PDL) messages 10-1

11. PURGE (PG) command messages 11-1

12. Printer subsystem controller (PSC) command messages 12-1

13. Queue management (QM) messages 13-1

14. SCALE command messages 14-1

15. Status file creation utility (SFC) command messages 15-1

16. Status file services (SFS) command messages 16-1

17. System verification error messages 17-1

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE iii

TABLE OF CONTENTS

18. Interpress (IP) error messages 18-1

Appearance error messages 18-2

Appearance warning messages 18-4

Appearance warning: 18-5

Appearance warning (page n): 18-5

Fatal error messages 18-7

Fatal Error: 18-7

Fatal Error (page n): 18-8

Informational messages 18-11

Master error messages 18-14

Master warning messages 18-21

Page error messages 18-21

System problem messages 18-22

System Problem: 18-22

System Problem (page n): 18-23

19. Finishing configuration (FCG) messages 19-1

20. HARDCOPY graphics printing (PR) command messages 20-1

21. HSPP or SDI messages 21-1

Appendix A-1

A. Abbreviations A-1

iv XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE

Introduction

The Xerox 4850/4890 HighLight Color Laser Printing System

Message Guide provides a description of all messages that may

appear on your system controller display or printed summary

sheet, and the appropriate action or actions to take, if any are

required.

This guide is intended for users who have some experience using

a Xerox laser printing system (LPS).

Conventions

This guide uses the following conventions:

<> Angle brackets are used for names of keys.

Bold Bold is used for text you enter.

italics Italics is used for variable information and names of books.

UPPERCASE Uppercase letters are used for command names.

<ENTER> Use the <ENTER> key to execute commands.

function key Press the function key to invoke the specified action. Do not

also press <ENTER>.

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE v

1. COMPRESS (CP)

command messages

COMPRESS (CP) command messages may appear during the

process of compressing the system disk.

This chapter lists and describes each CP message and provides

the appropriate actions to take as required. Refer to your Xerox

4850/4890 HighLight Color LPS Command Reference for

additional information.

CP1010 COMPRESS now restoring the print file

You entered the COMPRESS command. The process has moved

the print file to a different area of the system disk.

Action None.

CP1020 NOW PROCESSING DP0:

CP1030 NOW PROCESSING DP1:

CP1040 NOW PROCESSING DP2:

CP1050 NOW PROCESSING DP3:

You entered the COMPRESS command. The system is currently

compressing the indicated disk pack unit.

Action None.

CP1800 COMPRESS processor aborting.

You entered the ABORT command during the compress process.

The system disk is partially compressed.

Action None.

CP1900 Insufficient working memory for COMPRESS.

Not enough dynamic memory exists for the compress process.

Action Contact your service representative to obtain additional memory

capacity.

CP2700 Invalid keyin.

You entered the COMPRESS command incorrectly.

Action Reenter the command correctly.

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 1-1

COMPRESS (CP) COMMAND MESSAGES

CP2710 Keyins are not allowed at this time.

The compress process started, and the system cannot process

any other commands at this time.

Action 1. Wait for the compress process to complete.

2. Reenter the command.

CP2720 Invalid start command.

You entered the COMPRESS command incorrectly.

Action Reenter the command correctly.

CP9100 File integrity error. Edit and print CPR000.TMP

The system detected a sector that was allocated multiple times

and terminated the compress function. The system lists the

sector in a special file (CPR000.TMP).

Action 1. Print the CPR000.TMP error log to locate the problem.

2. Call your service representative and be prepared to provide

the information contained in the log.

1-2 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE

2. Data Capture Utility

(DCU) messages

Data Capture Utility (DCU) records console activity such as

message displays and operator keyins, and allows a redisplay or

printout of this data. You can use the DCU to track and monitor

system activity, and as a training tool. It is also helpful in

analyzing system problems.

DCU messages may appear when entering DCU commands,

capturing data, or playing back console activity. This chapter lists

and describes each DCU message and provides appropriate

actions to take as required. Refer to the Xerox 4850/4890

HighLight Color LPS Command Reference for additional

information on DCU commands.

DC0100 Reminder set to nminutes for device(s): CONSOLE

You entered the DCU CAPTURE command with the REMINDER

option or you entered the DCU REMINDER command. Your

requested reminder message is in effect for n minutes. The

default value for the reminder period is 60 minutes.

Action None.

DC0130 DCU capturing CONSOLE for ndays

You entered the DCU CAPTURE command. All console data is

currently being captured and retained on the system for ndays.

Action None.

DC0140 Reminder OFF for device(s): CONSOLE

You entered DCU REMINDER OFF or DCU REMINDER 0. All

reminders are now off for the console device.

Action None.

DC1020 DCU disconnecting all devices, and initializing all files

You entered the DCU RESET command and responded with Yes

to the confirmation prompt. All devices are being disconnected

and all captured data is being deleted. Data Capture is now off.

Action None.

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 2-1

DATA CAPTURE UTILITY (DCU) MESSAGES

DC1030 DCU exiting.

You entered the DCU EXIT command and responded with Yes to

the confirmation prompt. DCU has now stopped capturing data.

Action None.

DC1040 DCU formatting to console: CONSOLE

You entered the DCU FORMAT CONSOLE DISPLAY command.

This message indicates formatting is taking place and is being

output to the console.

Action None.

DC1041 DCU formatting to printer: CONSOLE

You entered DCU FORMAT CONSOLE PRINT. Formatting is

taking place and is being output to the printer.

Action None.

DC1045 DCU formatting stopped. No captured data to format.

You entered the DCU FORMAT command. The requested

captured data was not present in the DCU database because it

was deleted or because the DCU was inactive for the specified

time.

Action Enter DCU CAP to restart DCU capturing if DCU was turned off.

DC1060 Data capturing is currently inactive

You entered the DCU SHOW STATUS command when DCU was

turned off.

Action Enter DCU CAP to restart DCU capturing.

DC1080 DCU disconnecting from device: CONSOLE

This informative message displays in response to a DCU

CAPTURE OFF command.

Action None.

DC1090 Invalid DCU command: Retention period >40 days

You entered the DCU CAPTURE command with a retention

period greater than 40 days. The command was rejected.

Action Reenter the command using a retention period of 40 days or

less.

2-2 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora de Xerox

Xerox

Xerox Phaser 7300DN Manual de usuario

Xerox

Xerox Phaser 6125 Manual de instrucciones

Xerox

Xerox Phaser 6125 Manual de usuario

Xerox

Xerox HP-GL/2 Manual de usuario

Xerox

Xerox DocuPrint C3055 DX Manual de usuario

Xerox

Xerox Phaser 8400 Manual de usuario

Xerox

Xerox Phaser 7760 Guía de instalación y uso

Xerox

Xerox PHASER 6250 Instrucciones de instalación y mantenimiento

Xerox

Xerox Phaser 6280 Manual de funcionamiento

Xerox

Xerox PHASER 7500 Manual de funcionamiento

Xerox

Xerox DocuPrint C525 A-AP Manual de usuario

Xerox

Xerox Phaser 7800DN Manual de usuario

Xerox

Xerox DocuColor 5000AP Manual de usuario

Xerox

Xerox Phaser 3052 Manual de funcionamiento

Xerox

Xerox Phaser 5550 Manual de usuario

Xerox

Xerox PHASER 340 Manual de usuario

Xerox

Xerox Synergix 8830 Manual de usuario

Xerox

Xerox Phaser 6360 Manual de usuario

Xerox

Xerox Phaser 6120 Manual de usuario

Xerox

Xerox VersaLink B400 Manual de usuario

Xerox

Xerox Versant 3100 Press Manual de usuario

Xerox

Xerox 7760DN - Phaser Color Laser Printer Manual de usuario

Xerox

Xerox DocuColor 8000 Actualización de firmware

Xerox

Xerox Phaser 6200B Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario