Xerox 3117 - Phaser B/W Laser Printer Guía de inicio rápido

Version 0.2

October 2009

Page 1 of 8

Driver Upgrade Instructions

Table of Content

Installing updated drivers in Microsoft Windows ______________________________________________2

Uninstall Procedure_____________________________________________________________________2

Install Procedure _______________________________________________________________________3

Installing updated drivers in Macintosh______________________________________________________4

Uninstall Procedure_____________________________________________________________________4

Install Procedure _______________________________________________________________________4

Setting Up the Printer ___________________________________________________________________ 5

For a Network-connected Macintosh _____________________________________________________5

For a USB-connected Macintosh_________________________________________________________5

Installing updated drivers in Linux__________________________________________________________7

Uninstall Procedure_____________________________________________________________________7

Install Procedure _______________________________________________________________________7

Version 0.2

October 2009

Page 2 of 8

Installing updated drivers in Microsoft Windows

The new printer drivers and utilities are designed to work with the latest firmware release identified on

the product Drivers and Downloads page on Xerox.com. The printer should be upgraded to the latest

firmware before installing the new printer drivers and utilities.

If older versions of the drivers and/or utilities are installed on your Windows client they will need to be

uninstalled before the new versions are installed.

To use the following procedures, make sure you have administrative rights to the system.

Uninstall Procedure

Xerox printer wizard uninstall procedure:

1. [Select Start, All Programs, Xerox {Printer Model}, Maintenance].

Note: If the Maintenance option is not available the printer drivers will need to be manually

uninstalled in the Windows Printers folder. See Windows driver uninstall steps below.

2. Select Remove and click [Next].

3. Check all components in the Select Components window and click [Next].

4. Confirm that you want to remove the selected programs by clicking [Yes] on the pop-up window.

5. Click [Finish] once the uninstall procedure is complete.

Microsoft Windows printer driver uninstall procedure:

Note: If the Xerox Printer Wizard Procedure (above) was not available or did not complete

successfully the following steps must be followed for the printer drivers to be uninstalled

successfully:

1. Browse to the Windows Printers folder in Control Panel and delete all the printer objects

associated with the printer driver you want to uninstall.

2. In the printers folder select [File, Server Properties].

3. Select the [Drivers] tab to display all the drivers currently installed on the system.

4. Highlight the driver you would like to uninstall and click [Remove] to uninstall the driver files

and any related registry entries.

Note: If the driver is not present then it has already be uninstalled from Windows.

5. Confirm that you want to remove the selected programs by clicking [Yes] on the pop-up

window.

Version 0.2

October 2009

Page 3 of 8

Install Procedure

1. Download the latest drivers and utilities from http://www.support.xerox.com/.

2. The downloaded file is in the .zip format and will need to be extracted to a folder on the client.

3. Once the .zip file has been extracted, browse to the folder and double-click on Setup.exe to

launch the Install Wizard.

4. Click [Install Software].

5. Choose the appropriate installation type and click [Next]. If you are installing a local printer

simply following the instructions in the Wizard to complete the installation. If you are

installing a network printer continue to step 6.

6. If the SNMP Get Community on the device has been changed from the default (Public) click

on [Advanced], enter the correct Community Name, and click [OK]. Next, simply follow the

instructions in the Wizard to complete the installation.

You have now completed all steps in performing a Windows Driver upgrade.

Version 0.2

October 2009

Page 4 of 8

Installing updated drivers in Macintosh

Uninstall Procedure

Follow steps below to uninstall the driver for Macintosh.

1. Make sure that the machine is connected to your computer and powered on.

2. Insert the supplied software CD into your CD-ROM drive.

3. Double-click CD-ROM icon that appears on your Macintosh desktop.

Note: If you have misplaced your original CD-ROM, you can initiate the uninstall procedure

from the downloaded archive obtained from http://support.xerox.com . Simply double-

click on the downloaded .dmg file and follow the instructions below.

4. Double-click the MAC_Installer folder.

5. Double-click the Installer OS X icon.

6. Enter the password and click OK.

7. The Xerox Installer window opens. Click Continue.

8. Select Uninstall and click Uninstall.

9. When the message which warns that all applications will close on your computer appears,

Click Continue.

10. When the uninstall is done, click Quit.

Install Procedure

1. Download the latest drivers and utilities from http://www.support.xerox.com/.

2. The downloaded file is in the .dmg format. Double click on it to open the virtual disk image.

3. Once the disk image file is opened, Double-click the MAC_Installer folder.

4. Double-click the Installer OS X icon.

5. Enter the password and click OK.

6. The Xerox Installer window opens. Click Continue.

7. Select Easy Install and click Install. Easy Install is recommended for most users. All

components necessary for machine operations will be installed.

If you select Custom Install, you can choose individual components to install.

8. The message which warns that all applications will close on your computer appears. Click

Continue.

9. After the installation is finished, click Quit.

Version 0.2

October 2009

Page 5 of 8

Setting Up the Printer

Set up for your printer will be different depending on which cable you use to

connect the printer to your computer—the network cable or the USB cable.

For a Network-connected Macintosh

10. Open the Applications folder > Utilities > Print Setup Utility.

For Mac OS X 10.5~10.6, open the Applications folder > System Preferences and click

Print & Fax.

11. Click Add on the Printer List.

For Mac OS X 10.5~10.6, click the “+” icon; a display window will pop up.

12. For Mac OS X 10.3, select the IP Printing tab.

For Mac OS X10.4, click IP Printer.

For Mac OS X 10.5~10.6, click IP.

13. Select Socket/HP Jet Direct in Printer Type.

When printing a document containing many pages, printing performance may be enhanced

by choosing Socket for Printer Type option.

14. Enter the machine’s IP address in the Printer Address field.

15. Enter the queue name in the Queue Name field. If you cannot determine the queue name for

your machine server, try using the default queue first.

16. For Mac OS X 10.3, if Auto Select does not work properly, select Xerox in Printer Model and

your machine name in Model Name.

For Mac OS X 10.4, if Auto Select does not work properly, select Xerox in Print Using and

your machine name in Model.

For Mac OS X 10.5~10.6, if Auto Select does not work properly, select Select a driver to

use... and your machine name in Print Using.

Your machine IP address appears on the Printer List, and is set as the default machine.

17. Click Add.

For a USB-connected Macintosh

10.Open Print Center or Printer Setup Utility from the Utilities folder.

For MAC OS 10.5, open System Preferences from the Applications folder, and click

Print & Fax.

11.Click Add on the Printer List.

For MAC OS 10.5~10.6, press the “+”icon then a display window will pop up.

12.For MAC OS 10.3, select the USB tab.

For MAC OS 10.4, click Default Browser and find the USB connection.

For MAC OS 10.5~10.6, click Default and find the USB connection.

Version 0.2

October 2009

Page 6 of 8

13.Select your printer name.

14.For MAC OS 10.3, if Auto Select does not work properly, select Xerox in Printer

Model and your printer name in Model Name.

For MAC OS 10.4, if Auto Select does not work properly, select Xerox in Print

Using and your printer name in Model.

For MAC OS 10.5~10.6, if Auto Select does not work properly, select Select a driver

to use... and your printer name in Print Using.

Your machine appears on the Printer List and is set as the default printer.

15. Click Add.

You have now completed all steps in performing a Macintosh Driver upgrade.

Version 0.2

October 2009

Page 7 of 8

Installing updated drivers in Linux

Uninstall Procedure

Follow the steps below steps to uninstall the driver for Linux.

1. Make sure that the machine is connected to your computer and powered on.

2. When the Administrator Login window appears, type in “root” in the Login field and enter

the system password.

You must log in as a super user (root) to uninstall the printer driver.

If you are not a super user, ask your system administrator.

3. Insert the supplied software CD into your CD-ROM drive.

The software CD will run automatically.

If the software CD does not run automatically, click the icon at the bottom of the desktop.

When the Terminal screen appears, type in:

If the software CD is secondary master and the location to mount is /mnt/cdrom,

Note: If you have misplaced your original CD-ROM, you can initiate the uninstall procedure

from the downloaded archive obtained from http://support.xerox.com . Simply extract

the downloaded .tar file and follow the instructions below.

[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/cdrom

[root@localhost root]#cd /mnt/cdrom/Linux

[root@localhost Linux]#./uninstall.sh

The installation program runs automatically if you have an autorun software package installed

and configured.

4. Click Uninstall.

5. Click Next.

6. Click Finish.

Install Procedure

1. Download the latest drivers and utilities from http://www.support.xerox.com/.

2. The downloaded file is in the .tar format and will need to be extracted to a folder on the client.

3. Once the .tar file has been extracted, browse to the folder and double-click on setup.sh to

launch the Install Wizard.

4. The Xerox Installer window opens. Click Continue.

5. The Add printer wizard window opens. Click Next.

6. Select Network printer and click Search button.

Version 0.2

October 2009

Page 8 of 8

7. The Printer’s IP address and model name appears on list field.

8. Select your machine and click Next.

You have now completed all steps in performing a Linux Driver upgrade.

Otros manuales para 3117 - Phaser B/W Laser Printer

Tabla de contenidos

Otros manuales de Impresora de Xerox

Xerox

Xerox Phaser 6500 Manual de usuario

Xerox

Xerox 7700 Manual del propietario

Xerox

Xerox 3124 - Phaser B/W Laser Printer Manual de usuario

Xerox

Xerox DocuPrint 100MX Manual de usuario

Xerox

Xerox DocuColor 8000 Actualización de firmware

Xerox

Xerox 6200DX - Phaser Color Laser Printer Instrucciones de instalación y mantenimiento

Xerox

Xerox Phaser 7300 Manual de usuario

Xerox

Xerox PHASER 340 Guía de configuración

Xerox

Xerox 6360V_DN Manual de usuario

Xerox

Xerox DocuPrint C55 Manual

Xerox

Xerox 4050 Manual de funcionamiento

Xerox

Xerox 3124 - Phaser B/W Laser Printer Manual de usuario

Xerox

Xerox 770 Manual de instrucciones

Xerox

Xerox DocuColor 1632 Manual de usuario

Xerox

Xerox DocuPrint N3225 Manual de servicio

Xerox

Xerox 7500/DN - Phaser Color LED Printer Manual de usuario

Xerox

Xerox DocuPrint C1618 Manual de usuario

Xerox

Xerox workcentre wc3655 Manual de usuario

Xerox

Xerox Phaser 860 Manual del propietario

Xerox

Xerox WORKCENTRE 7120 Manual de usuario

Xerox

Xerox Phaser 6110N Manual de usuario

Xerox

Xerox Phaser 3121 Manual de usuario

Xerox

Xerox Phaser 7760 Manual de usuario

Xerox

Xerox DocuColor 2240 Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario