Xerox Nuvera 120 EA Hoja de especificaciones

™

(

™

)

Versi n: f

April 12, 2006

Includes:

•

Xerox Nuvera™ 100/120 Digital Copier/Printer

•

Optional Professional Multifunction Finisher MFF)

•

Optional Insertion Module

•

Optional 2

Sheet Feed Module

•

Optional Foreign Device Interface

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument

- 2 -

Copyright protection claimed includes all forms and matters of copyrighted material and information now allowed by statutory or judicial law or hereinafter granted, including without limitation,

material generated from the software programs that are displayed on the screen such as styles, templates, icons, screen displays, looks, etc.

XEROX®, The Document Company®, Nuvera™, DocuSP®, FreeFlow™, the digitized X, and all Xerox product names and product numbers mentioned in this publication are trademarks of

XEROX CORPORATION. All non-Xerox brands and product names may be trademarks or registered trademarks of the respective companies, and are hereby acknowledged.

Product appearance, build status and/or specifications are subject to change without notice.

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument

- 3 -

Table f C ntents

N.................................................................................................................4

W.......................................................................................................4

CRUCIAL PERFORMANCE EXPECTATIONS...................................................................5

NEW CAPABILITIES IN XEROX NUVERA

SYSTEM RELEASE 6.0..............................6

OPTIMUM PRODUCT PERFORMANCE ............................................................................7

ENVIRONMENTAL FACTORS ...........................................................................................7

PRODUCT SPACE & POWER REQUIREMENTS..............................................................8

SYSTEM CONFIGURATION AND INSTALLATION ...........................................................8

OPERATIONS.....................................................................................................................9

SUPPLIES AND COMPONENT YIELDS ............................................................................9

SYSTEM PERFORMANCE IMPACTS..............................................................................10

XEROX PRODUCTIVITY PLUS (XPP)..............................................................................11

PRINTERACT (FORMERLY REMOTE SERVICES).........................................................11

COMPATIBLE MEDIA LIST..............................................................................................11

PRODUCT SPECIFICATIONS OVERVIEW BY SUB-SYSTEM........................................16

FREEFLOW MAKEREADY, WEB SERVICES AND PROCESS MANAGER...................16

FREEFLOW VARIABLE INFORMATION (VI) SUITE .......................................................17

NETWORK CONNECTIVITY.............................................................................................18

SCANNER.........................................................................................................................19

DIGITAL FRONT END (DFE) - FREEFLOW™ DOCUSP® ..............................................21

PRINT FROM DIGITAL FILE ............................................................................................22

SCAN TO DIGITAL FILE...................................................................................................22

KIT LIMITATIONS .............................................................................................................23

SHEET FEED MODULE (SFM).........................................................................................24

PRINTER MODULE...........................................................................................................27

MULTIFUNCTION FINISHER: STANDARD & PROFESSIONAL.....................................29

POST-PROCESS USES OF XEROX NUVERA™ OUTPUT.............................................34

FUTURE FEATURES - XEROX NUVERA™ 100/120 DIGITAL COPIER/PRINTER ........34

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument

- 4 -

The purpose of this document is to help you understand the current features and capabilities of the

Xerox Nuvera™ 100/120 Digital opier/Printer (D /P). Review of this material is recommended prior to

your signing an order for a Xerox Nuvera™ 100/120 Digital opier/Printer.

This document addresses high-level expectations. Additional details are provided in the training

documentation.

The Xerox Nuvera™ 100/120 Digital opier/Printer sets a new benchmark in the world of on-demand

printing. It is a network-able copying and printing system comprised of multiple modules. The Xerox

FreeFlow™ Document Services Platform (FreeFlow™ DocuSP®) is integrated into the Printer Module.

The Scanner scans at 120 images per minute at 600 x 600 dpi, simplex or duplex, and has a 300 sheet

input tray. The standard Sheet Feed Module (SFM) has four drawers that will reliably feed a wide range

of stocks. Two optional Sheet Feed Modules (SFMs) are also available for use as a second SFM: one

with 2 trays (having more large format media capacity), the other with 4 (this latter is the same as the

standard SFM). A 4-tray SFM may also be installed after the printer module and used as an inserter.

The Sheet Feed Module will reliably feed a wide range of stocks. The Printer module prints at 4800 x

600 dpi utilizing a state of the art dual beam laser ROS (Raster Output Scanner) with dedicated image

processing hardware. The Multifunction Finisher module has two models to choose from – the Standard

or the Professional.

The Nuvera Family of Products complies with the American Disability Act, Section 508 of the

Rehabilitation Act.

For the first time, FreeFlow™ DocuSP® not only controls the printer, it now also controls the scanner.

This provides the most flexible, stable copying and printing platform in the industry.

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument

- 5 -

Crucial Performance Expectations

The Xerox Nuvera™ 100/120 Digital opier/Printer is a “clean-sheet” design utilizing innovative

technologies. It is the new base platform for Xerox monochrome products.

The following expectations should be explicitly set. Please see the appropriate section of the ED for more

detail.

Availability

The Xerox Nuvera™ 100/120 Digital opier/Printer will be available on a monthly average 92% to 96%

of the time.

•

Availability is defined as the amount of time the machine is not being serviced or waiting for service

by Xerox.

•

Given similar service coverage, DocuTech® availability averages up to 95%.

Media Capability

• Reinforced stocks should be limited to less than 90 loaded in a tray at one time.

• Tab jobs must be run with reverse collated tabs. Also, Running tabs requires proper use of the

supplied Tab Guides.

• Tabs are supported when the number of segments is 10 or less.

• Envelopes

Envelopes should be limited to 60 loaded in a tray at one time. Nuvera feeder trays feed until almost

empty but not until empty, leaving 20~40 sheets remaining. When running envelopes frequent

reloading of the feeder trays will be required.

Very slight wrinkles (1/2 inch long) may occur on the trail edge of envelopes at the corners.

Due to the nature of feeding envelopes with flap open, some mis-stacking may occur in the top tray

as the envelopes catch on the open flaps.

Envelopes can only be sent to the Top Tray, with a maximum limitation of 15.

• Drilled Paper & Tab Jobs: urrently most jobs are delivered face down, with the bind edge trailing

to match the requirements of the finisher. When tabs are run to the MFF, the tabs must be delivered

with the tab leading and this requires an inversion at the exit of the paper path and entrance into the

finisher. It is quite common to run drilled paper when running tabbed jobs, and this requires the user

to reverse the loading of the drilled body stock in the tray such that the drilled edge is opposite what

the paper tray loading label for drilled body stock shows.

• Windowed stocks are not supported – performance (jams) maybe degraded.

• DocuCards

Docu ards can only be loaded 100 at a time in a tray. Nuvera feeder trays feed until almost empty

but not until empty, leaving 20~40 sheets remaining. When running Docu ards, frequent reloading

of the feeder trays will be required.

Docu ards can only be run to the Top Tray of the finisher. Some mis-stacking may occur as the

Docu ards catch on the edges of the stacked sheets.

Printer Module

• This is not a print to edge system due to potential image quality defects on the edge of the page.

• Printing on SRA3 can result in inboard and outboard edge image quality defects.

• Stocks with pre-printed Xerographic color inks are not suitable for feeding from the Sheet Feed

Module (SFM); such stocks can be fed from the Insertion Module (IM).

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument

- 6 -

• It is highly recommended to avoid printing over pre-printed stocks with offset ink, whenever possible.

When printing over offset inks, image permanence may be compromised. Toner does not adhere to

pre-printed stock with heavy ink coverage. There are other factors that should be taken into account

to successfully print on pre-printed – please refer to the following web site for guidance:

http://www.xerox.com/go/xrx/template/009.jsp?view=Feature&ed_name=Supply_Library_pre_printing&Xcntry=USA&Xlang=en

_US

• Images printed on Mylar tabs are typically degraded by toner scatter.

• Productivity for 8.5” x 14” paper is less than that for 8.5” x 11” paper – refer to the System

Productivity section.

FreeFlow™DocuSP®

• The Token Ring option is no longer natively supported in DocuSp. ustomers requiring Token Ring

will need to acquire a bridge box from a vendor providing that capability to connect their Token Ring

to the DocuSP® Ethernet connection.

FreeFlow Digital Workflow Collection

FreeFlow Makeready, Web Services and Process Manager, versions 3.0 and higher, provide full

support for the Nuvera Digital opier/Printer, but customers with earlier versions of these applications

may need to upgrade since SPAR support will not be available.

New Capabilities in Xerox NuveraTM System Release 6.0

• New ontroller platform offering faster RIP performance for complex data streams, as well as improved GUI

response.

• Automatic adjustment of fuser temperature to paper weight around nominal 190 degrees centigrade, so as to

minimize curl for lighter weight stock, and to maximize fuse fix for heavier weight and rough stock. Minor

impacts to productivity may occur if there are large swings in paper weight.

• RUM ( ustomer Replaceable Unit Memory) function recognizes intended toner, and protects against

damage from accidental use of improper toner.

• Productivity enhancement for duplex unfinished jobs with appropriate media in N to 1 face up order.

• Xerox Productivity Plus enhancement, with two separate one-day training sessions.

• Note: ‘ url Improvement Mode’ is not recommended for use in the opier/Printer system.

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument

- 7 -

ptimum Product Performance

Print Volume Range

The Xerox Nuvera™ 100/120 Digital opier/Printer is designed for a range of monthly print volumes.

System Average M nthly

Print V lume (AMPV)

C nditi ns

Xerox Nuvera™ 100/120

Digital Copier/Printer

100K – 500K 8.5 in x 11 in/A4

Maximum duty cycle: Up to 700K prints per month

Duty cycle is defined as:

The maximum monthly copy / print volume support under standard vendor supplied service (1X5 shift

coverage). This defines the upper end of expected customer volume band for the device.

The ustomer should consider higher volume machines or multiple machines if average monthly volume

approaches duty cycle on a constant basis.

Prints between service calls on a digital mid-production system are dependent on customer requirements for

quality, volume, applications, and throughput material. Xerox Nuvera™ trained operators can optimize

performance output and help to minimize service calls.

Environmental Factors

Envir nmental Fact r Minimum Maximum

Temperature 50

F 10

Tested to 60° F

15.6

C))

F 32.2

Tested to 80° F

26.7

C))

Humidity 15% RH

Tested to 15%)

85% RH

Tested to 80%)

Heat Emissi n (appr ximate)

- SFM /PM/ MFF

2,465 BTU / HR

Standby)

17,537 BTU / HR

Running)

P wer C nsumpti n (appr ximate)

- SFM/ PM/ MFF

0.723 kw

Standby)

4.275 kw

Running)

N ise

(Appr ximate s und pressure level at perat r

p siti n)

42.5 dBA

Standby)

66.3 dBA

Running)

Altitude (ab ve sea level) 0 10,000 ft.

N minal V ltage (Pr cess r) 200 240

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument

- 8 -

Product Space & Power Requirements

Item Xer x Nuvera™ 100/120 Digital

C pier/Printer

C mments

Size – Printer

w/ 1 SFM &

Pr fessi nal

MFF

131.3” W) x 30” D) x 61.6” H)

3336mm x 736mm x 1565.6mm

Width –

additi nal

SFM

31.7” 805mm)

Optional

Service Space Fixed: 162” W) x 113” D)

4114.8mm x 2870.0mm)

Moveable: 162” W) x 92” D)

4114.8mm x 2336.8mm)

- Fixed stationary) installation: rear of the

system should be at least 30” from the wall.

- Moveable installation: rear of the system

should be at least 10” from the wall and must

be on mobility plates OR hard surface floor

AND 4 modules or less.

Weight 1,753 lb. 795.1 kg)

Additional SFM – 423 lbs. 191.9 kg)

With consumables loaded except media)

P wer and

Agency

Requirements

N rth America

208 Volts / 30 Amp sole use, 60 Hz

Two phase, 3 wire + PE L1, L2, N, GND)

• UL & cUL compliant

• Complies with the FEMP Federal Energy

Management Program) via the machine

circuit breaker CB); with the CB switched

off, the system consumes less than 1 watt.

• Energy Star eStar) compliant

• Environmental Choice Canada)

•

omplies with Section 508 of the ADA

Rehabilitation Act

P wer

Requirements

Eur pe/Japan

200-240 Volts / 25 Amp sole use, 50 Hz

Single phase, 2 wire + PE L, N, GND)

• Energy Star eStar) compliant

• Units are compliant with applicable EU

directives and are CE marked

System Configuration and Installation

Installati n Preparati n D cument

This section should be used in conjunction with the Xerox Nuvera™ 100/120 Digital Copier/Printer

Installation Planning Guide (IPG) and the Xerox Nuvera™ 100/120 Digital Copier/Printer Installation

Preparation Do ument (IPD), which contain detailed specifications for size, weight, electric, and

environmental conditions. Only the most important requirements are stated here.

Customer Responsibilities

The following must be completed before the system can be delivered and will be assessed in the final site

check:

Item C mments

Identify placement f the system

Ensure the printer can be delivered t the site

Supply the appr priate electrical c nnecti ns Dedicated power required

Install an exhaust duct t vent h t air t the air

system r the utside if required

Heat Vent Kit is available for stationary system

installations only. The kit lowers the system’s output

from approximately 17,500 BTU/hour to 8,500 BTU/hr.

Verify the strength and sl pe f the fl r

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument

- 9 -

Item C mments

Meet r m Envir nmental Specificati ns f r

temperature and relative humidity year r und

This is essential t the system’s ability t perf rm

as expected; Xer x will n t be able t res lve

perf rmance pr blems enc untered when the area

is n t maintained within this perating range

Install a netw rk dr p f r Internet access

C nnect system t netw rk including pr xy

server inf rmati n

System Installati n

Allow 4 to 6 hours to complete the system installation.

perations

Item Xer x Nuvera™ 100/120 Digital

C pier/Printer C mment

P wer Up

• Warm up from Power Saver -

3.5 minutes.

• System ready to print queued jobs -

4 minutes, 45 seconds. From Off)

• System UI fully available for Copy programming -

7 minutes. From Off)

• The system may be powered down at night or for

any extended period of time as long as the space

is maintained at the specified temperature and RH.

If the environment does drift

outside the specified range

during the systems powered

down state, some period of

image degradation can be

expected at startup.

First C py Out

Time (FCOT) 8.5 seconds

Copy job sent to the top tray;

platen scan, simplex job, 8.5 x

11 LEF fed from tray 1; no

Insertion Module

First Print Out

Time (FPOT) 9.5 seconds.

Printer should not cycle down

as long as it receives an image

to print within 5 seconds of

completing the previous sheet.

Restart Time

• System ready to print queued jobs -

3 minutes 40 seconds.

• System UI fully available for Copy programming -

5 minutes, 45 seconds.

Billing Meters Available via the Administrati n wind w.

Vary by operating company /

country; ask local analyst or

sales representative to explain

your meter operation.

Automated reading of the billing

meter is available, If Remote

Services are enabled

Supplies and Component Yields

The consumable supplies listed below are engineered specifically for use in the Xerox Nuvera™ 100/120

Digital opier/Printer and provide the highest and most consistent image quality, maximum machine

productivity, and uptime.

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument

- 10 -

All yield estimates are based on the indicated 6% area coverage at standardized conditions using 8 ½” x 11”

/ A4 Xerox 20 lb. (75 gsm) stock. Please note that actual yields vary greatly depending on area coverage,

paper stock, and image quality control settings. The current estimates are shown below.

Consumables

Supply Yield Estimates

T ner 110,000 prints/ 10 lb. drum @ 6% AC

100 Sheet Staple

Cartridge

Comes installed in machine. Filled with 1 -

5,000 staple refill, this cartridge typically

lasts the life of machine.

100 Sheet Staple Refills 5,000 staples per refill, 3 refills per carton

50 Sheet Staple

Cartridge

Required for initial 50-sheet stapler capacity

order. Filled with 1 - 5,000 staple refill, this

cartridge typically lasts the life of machine.

50 Sheet Staple Refills 5,000 staples per refill, 3 refills per carton.

Staples Refills f r MFF

B klet Maker

(1 f r rear and 1 f r

fr nt stapler required)

2,000 staples per box; 16,000 per carton

8 Boxes per carton)

Customer Replaceable Units

CRU Yield Estimates

T ner Waste B ttle 750,000 prints

Waste Devel per B ttle 350,000 prints

Disposal Process

All Toner Waste Bottles include a prepaid return shipping label, plastic bag, and tie in the box. This is the

preferred method of disposal.

Empty dry ink containers and waste containers are safe and approved for local recycling with common

commercially used plastics.

More information can be found at www.Xerox.com, under Online Supplies Ordering; artridge Recycling

Program.

System Performance Impacts

The printer should not cycle down as long as it receives a page to print within five seconds of completing the

previous page. Depending on job characteristics, the following may or may not impact system performance.

Item Xer x Nuvera™ 100/120 Digital

C pier/Printer C mment

Print Quality

Adjustments

Brief pauses for registration or

xerographic process adjustments to

maintain high image quality

Otros manuales para Nuvera 120 EA

Este manual sirve para los siguientes modelos

Otros manuales de Impresora todo en uno de Xerox

Xerox

Xerox Work Centre 4265 Manual de usuario

Xerox

Xerox 220 Guía de instalación

Xerox

Xerox 4150 - WorkCentre B/W Laser Manual de usuario

Xerox

Xerox PHASER 8560MFP Manual del operador

Xerox

Xerox WorkCentre 3215 Manual de funcionamiento

Xerox

Xerox DocuPrint 4850 Manual técnico

Xerox

Xerox WorkCentre 3655 Instrucciones de funcionamiento

Xerox

Xerox WorkCentre 6025 Manual de funcionamiento

Xerox

Xerox CUSTOMER TIPS 7425/7428/7435 Manual de usuario

Xerox

Xerox DocuColor 2240 Manual de usuario

Xerox

Xerox Phaser 6125 Manual de usuario

Xerox

Xerox WORKCENTRE 7120 Manual de funcionamiento

Xerox

Xerox Phaser 3100MFP Manual de usuario

Xerox

Xerox WORKCENTRE 5735 Manual de usuario

Xerox

Xerox WorkCentre 7232 Manual de funcionamiento

Xerox

Xerox FaxCentre F12 Manual de usuario

Xerox

Xerox AltaLink B80 series Manual de usuario

Xerox

Xerox WorkCentre Pro 635 Manual de instrucciones y seguridad

Xerox

Xerox WorkCentre 5019 Instrucciones de instalación y funcionamiento

Xerox

Xerox WORKCENTRE 7755 Manual de funcionamiento

Xerox

Xerox WORKCENTRE C2424 Manual de usuario

Xerox

Xerox WorkCentre 7500 Series Manual de funcionamiento

Xerox

Xerox C8130 Manual de usuario

Xerox

Xerox WorkCentre 3119 Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario