Xerox 3635MFP - Phaser B/W Laser Guía de inicio rápido

Phaser 3635MFP Software Upgrade Process

Overview

The Software Upgrade feature allows the customer to upgrade the machine software as

requested by a Xerox Customer Support Center Representative, without needing a

Customer Service Representative to be present.

When should I upgrade the software?

Xerox is continually seeking to improve their products and a software revision may

become available to improve functionality on the machine. The most recent software for

your machine is typically posted on the Xerox.com website.

How do I upgrade the software?

NOTE: Upgrading software will delete any current jobs in the machine print queue

and prevent further jobs from printing until the upgrade has completed. If you wish to

preserve these jobs, allow them to complete before upgrading your software. All

configured network settings and installed options will be retained by the machine after

the Software Upgrade process.

There are 3 methods for upgrading the software on the machine:

1. Manual upgrade over a network connection using CentreWare Internet Services

(via a web browser).

2. Manual upgrade directly at the machine with a USB flash drive connected to the

USB port on the front of the machine

3. Manual upgrade using Print File Submission.

1. Manual Upgrade using CentreWare Internet Services

If your machine is connected to the network, it is possible to upgrade the software

through CentreWare Internet Services. The machine will need to be configured for

TCP/IP and HTTP.

Determining whether your machine has a network connection

1. Press the <Machine Status> button on the Control Panel.

2. Touch [Information Pages].

3. Touch [System Configuration].

4. Touch [Print].

5. Reference the printed report. Look under the Network Setup Section, TCP/IP

Settings. Verify there is an IP address listed and TCP/IP Enabled = Enabled. If so,

then the machine has a valid network connection.

2. Manual Upgrade using a USB flash drive

You may also upgrade your machine by connecting a USB flash drive to the USB port at

the front of the machine. This method is typically utilized if your machine does not have a

network connection or if a local machine upgrade is preferred.

3. Manual Upgrade using Print File Submission

An upgrade file may be submitted as a print ready file to a printer port, example Port

9100. The machine interpreter will identify the file as containing a firmware upgrade and

start the upgrade process. All printing protocols supported by the machine support Print

File Submission upgrades. Contact your local system administrator for assistance in

performing an upgrade by this method.

Manual upgrade using a USB flash drive

This section provides instructions to upgrade machine software via a Software

Upgrade file stored on a USB flash drive.

Information Checklist

Before starting the procedure, please ensure that the following items are available:

1. The upgrade file will have an [.hd] extension.

IMPORTANT: It is important to obtain the correct upgrade file for your particular model

of machine. Insure you have loaded the software file on your USB thumb drive prior to

starting the upgrade procedure.

Procedure

1. Plug in the USB flash drive into the USB port at the front of the machine.

2. Select [Print from USB] from the pop-up menu.

3. A list of files and folders on the USB flash drive will appear.

4. Select the Upgrade File [.hd] by touching it. You may need to scroll down the menu to

see the file. Select [Add] from the pop up menu.

5. Select [Done].

6. Select the Upgrade File [.hd] by touching it. Press the green <Start> button on the

front panel to send the file to the machine and start the upgrade process.

7. This screen will flash for a few moments while the file is being copied off the USB

thumb drive. DO NOT REMOVE the USB thumb drive while this message is

displayed.

8. The User Interface will then go blank for a minute then indicate the status of the

upgrade. It is now safe to remove the USB thumb drive. It will take approx. 25 minutes

to finish the upgrade. The machine will reboot once the upgrade is complete.

Note: A Configuration Report will be printed after the machine has rebooted

successfully. You can confirm the new software version from the printed report under

Printer Setup section under System Software Version listing.

Manual upgrade using Internet Services

This section provides instructions to upgrade machine software over the network

via Xerox CentreWare Internet Services (CWIS).

Information Checklist

Before starting the procedure, please ensure that the following items are available:

1. The upgrade file will have an [.hd] extension.

IMPORTANT: It is important to obtain the correct upgrade file for your particular model

of machine.

2. If you are performing the upgrade on a network connected machine, ensure that the

machine is online before continuing. TCP/IP and HTTP protocols must be enabled on

the machine so that the machine web browser can be accessed. Obtain the IP

address of the machine you want to upgrade.

Procedure

1. Open the web browser from your Workstation.

2. Enter the IP Address of the machine in the Address bar and select [Enter].

3. Click on the [Properties] tab.

4. Click on [Maintenance].

5. Click on [Upgrade Management]. If prompted, enter the User ID and Password of the

Administrator’s account and click on [Login]. Note: Default User ID is admin, Default

Password is 1111

6. Verify Upgrades are Enabled. If not, then select the [Enabled] box. Click on the [OK]

button from the pop up window.

7. Click on [Firmware Upgrade].

8. In the [Firmware Upgrade] box select [Browse] to locate the software upgrade file on

your computer [.hd] that you obtained earlier.

9. Select the [.hd] file and click on the [Open] button.

10. Click on the [Install Software] button to proceed with the upgrade. You will be

prompted to confirm. Select [OK]. A pop up window will appear with the message

“Processing upgrade. It can take more than a minute.” Click [OK] to close the window.

The file will be sent to the printer and will disable the printing functionality. The web

browser will become inactive and you will not be able to access the machine via this

method until the upgrade has completed and the machine has rebooted. The upgrade

should take no longer than 30 minutes. Once the machine has completed the upgrade

it will reboot automatically.

Note: A Configuration Report will be printed after the machine has rebooted

successfully. You can confirm the new software version from the printed report under

Printer Setup section under System Software Version listing.

GZ 12/01/08

Otros manuales para 3635MFP - Phaser B/W Laser

Tabla de contenidos

Otros manuales de Impresora todo en uno de Xerox

Xerox

Xerox WORKCENTRE PE 220 Manual de usuario

Xerox

Xerox CopyCentre 232 Manual de usuario

Xerox

Xerox WORKCENTRE 5735 Manual del propietario

Xerox

Xerox WorkCentre 3655 Manual de usuario

Xerox

Xerox WorkCentre Pro C2128 Manual de usuario

Xerox

Xerox 220 Manual de usuario

Xerox

Xerox ColorQube 8900 series Manual de usuario

Xerox

Xerox WorkCentre Pro 412 Manual de usuario

Xerox

Xerox WORKCENTRE 7120 Guía de instalación y uso

Xerox

Xerox WorkCentre 3215 Manual de funcionamiento

Xerox

Xerox Wide Format 6204 Manual de instrucciones

Xerox

Xerox WorkCentre 390 Manual de usuario

Xerox

Xerox WorkCentre 5022 Manual de usuario

Xerox

Xerox COLORQUBETM 9201 Manual de usuario

Xerox

Xerox Nuvera Digital Production System Paper Guía de referencia rápida

Xerox

Xerox WORKCENTRE 7120 Manual de usuario

Xerox

Xerox WorkCentre 7500 Series Manual de funcionamiento

Xerox

Xerox VersaLink B625 Manual de usuario

Xerox

Xerox Phaser 6128 MFP Manual de usuario

Xerox

Xerox WorkCentre 6515 Manual de usuario

Xerox

Xerox WorkCentre 6605DN Manual de usuario

Xerox

Xerox VersaLink B70 Series Manual de usuario

Xerox

Xerox WorkCentre 6025 Manual de usuario

Xerox

Xerox versalink C7020 Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario