Xerox 3124 - Phaser B/W Laser Printer Manual de usuario

Transmittal Page

Product

Phaser 3124

Phaser 3125

Title

Service Manual

Part Number

708P88624

Status

Launch

Date

September 2006

708P88624 09/06

Service Manual

708P88624

PHASER 3124

PHASER 3125

09/06 PHASER 3124 / PHASER 3125

Service Documentation

708P88624

September 2006

Prepared by:

Xerox Europe,

Global Knowledge & Language Services,

Enterprise Centre,

P.O. Box 17,

Bessemer Road,

Welwyn Garden City,

Hertfordshire,

AL7 1BU, England.

Xerox, and all identifying numbers used in connection with the Xerox products mentioned in this

publication are registered trademarks of Xerox. Other company trademarks are also acknowl-

edged.

NOTICE

While every care has been taken in the preparation of this manual, no liability will be accepted by

Xerox Europe arising out of any inaccuracies or omissions.

All service documentation is supplied to Xerox external customers for informational purposes

only. Xerox service documentation is intended for use by certified, product trained service per-

sonnel only. Xerox does not warrant or represent that it will notify or provide to such customer

any future change to this documentation. Customer performed service of equipment, or modules,

components or parts of such equipment may affect whether Xerox is responsible to fix machine

defects under the warranty offered by Xerox with respect to such equipment. You should consult

the applicable warranty for its terms regarding customer or third-party provided service.

Introduction

PHASER 3124 / PHASER 3125 09/06 i

Introduction

Precautions ..............................................................................................................................iii

Health and Safety Incident Reporting........................................................................................x

1. Service Call Procedures

Section Contents................................................................................................................... 1-1

2. Repair Analysis Procedures

Section Contents................................................................................................................... 2-1

3. Image Quality

Section Contents................................................................................................................... 3-1

4. Repairs/Adjustments

Section Contents................................................................................................................... 4-1

5. Parts List

Section Contents................................................................................................................... 5-1

6. General Procedures/Information

Section Contents................................................................................................................... 6-1

7. Wiring Data

Section Contents................................................................................................................... 7-1

Introduction

ii 09/06 PHASER 3124 / PHASER 3125

Page intentionally blank

Introduction

PHASER 3124 / PHASER 3125 09/06 iii

Service Manual Formats

Table 1: Service Manual Formats

Part number Format

708P88624 Hardcopy

708P88623 PDF on CD

Introduction

iv 09/06 PHASER 3124 / PHASER 3125

Introduction

Precautions

In order to prevent accidents and to prevent damage to the equipment, please read the precau-

tions listed below carefully and follow them closely before servicing the machine.

Warnings, Cautions and Notes WARNING

A warning is used whenever an operating or maintenance procedure, practice, condition or state-

ment, if not strictly observed, could result in personal injury.

CAUTION

A caution is used whenever an operation or maintenance procedure, practice, condition or state-

ment, if not strictly observed, could result in damage to the equipment.

Note: A note is used where it is essential to highlight a procedure, practice, condition or

statement.

Safety Warning

1. Only to be serviced by appropriately qualified service engineers.

Highvoltages and lasers insidethisproductaredangerous.Thismachineshouldonly be serviced

by a suitably trained and qualified service engineer.

2. Use only Xerox replacement parts

There are no user serviceable parts inside the machine. Do not make any unauthorized changes

or additions to the machine, these could cause the machine to malfunction and create electric

shock or fire hazards.

3. Laser Safety Statement

The machine is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1

Subchapter J for Class 1(1) laser products, and elsewhere, it is certified as a Class I laser product

conforming to the requirements of IEC 825. Class I laser products are not considered to be haz-

ardous. The laser system and machineare designed so there is never any human access to laser

radiation above a Class I level during normal operation, user maintenance, or prescribed service

condition.

Introduction

PHASER 3124 / PHASER 3125 09/06 v

WARNING

Avoid exposure to laser beam. Invisible laser radiation.

Caution for safety

Toxic material

This product contains toxic materials that could cause illness if ingested.

1. Please keep toner cartridges away from children. Toner contained in the print cartridge may

be harmful. If swallowed, contact a doctor immediately.

Electric Shock and Fire Safety Precautions

Failure to follow the following instructions could cause electric shock or potentially cause a fire.

1. Use only the correct voltage, failure to do so could damage the machine and potentially

cause a fire or electric shock.

2. Use only the power cable supplied with the machine. Use of an incorrectly specified cable

could cause the cable to overheat and potentially cause a fire.

3. Do not overload the power socket, this could lead to overheating of the cables inside the wall

and could lead to a fire.

4. Do not allow water or other liquids to spill into the machine, this can cause electric shock. Do

not allow paper clips, pins or other foreign objects to fall into the machine these, could cause

a short circuit leading to an electric shock or fire hazard.

CAUTION - INVISIBLE LASER RADIATION

WHEN THIS COVER OPEN.

DO NOT OPEN THIS COVER.

VORSICHT - UNSICHTBARE LASERSTRAHLUNG,

WENN ABDECKUNG GE FFNET.

NICHT DEM STRAHLAUSSETZEN.

ATTENTION - RAYONNEMENT LASER INVISIBLE EN CAS

D OUVERTURE. EXPOSITION DANGEREUSE

AU FAISCEAU.

ATTENZIONE - RADIAZIONE LASER INVISIBILE IN CASO DI

APERTURA. EVITARE L ESPOSIZIONE AL

FASCIO.

PRECAUCION - RADIACION LASER IVISIBLE CUANDO SE ABRE.

EVITAR EXPONERSE AL RAYO.

ADVARSEL. - USYNLIG LASERSTR LNING VED BNING, N R

SIKKERHEDSBRYDERE ER UDEAF FUNKTION.

UNDG UDSAETTELSE FOR STR LNING.

ADVARSEL. - USYNLIG LASERSTR LNING N R DEKSEL

PNES. STIRR IKKE INN I STR LEN.

UNNG EKSPONERING FOR STR LEN.

VARNING - OSYNLIG LASERSTR LNING N R DENNA DEL

R PPNAD OCH SP RREN R URKOPPLAD.

BETRAKTAEJ STR LEN. STR LEN R FARLIG.

VARO! - AVATTAESSA JA SUOJALUKITUS OHITETTAESSA

OLETALTTIINA N KYM TT M LLE LASER-

S TEILYLLE L KATSO S TEESEEN.

Introduction

vi 09/06 PHASER 3124 / PHASER 3125

5. Never touch the plugs on either end of the power cable with wet hands. This can cause an

electric shock. When servicing the machine, remove the power plug from the wall socket.

6. Use caution when inserting or removing the power connector. The power connector must be

inserted completely otherwise a poor contact could cause overheating and possibly lead to a

fire. When removing the power connector grip it firmly and pull.

7. Take care of the power cable. Do not allow it to become twisted, bent sharply round corners

or otherwise damaged. Do not place objects on top of the power cable. If the power cable is

damaged, it could overheat and cause a fire or exposed cables could cause an electric

shock. Replace a damaged power cable immediately, do not reuse or repair the damaged

cable. Some chemicals can corrode the coating on the power cable, weaken the cover or

exposing cables causing fire and shock risks.

8. Ensure that the power sockets and plugs are not cracked or broken in any way. Any such

defects should be repaired immediately. Take care not to cut or damage the power cable or

plugs when moving the machine.

9. Use caution during thunder or lightning storms. Xerox recommend that this machine be dis-

connected from the power source when such weather conditions are expected. Do not touch

the machine or the power cord if it is still connected to the wall socket in these weather condi-

tions.

10. Avoid damp or dusty areas, install the machine in a clean well ventilated location. Do not

position the machine near a humidifier. Damp and dust build up inside the machine can lead

to overheating and cause a fire.

11. Do not position the machine in direct sunlight. This will cause the temperature inside the

machine to rise possibly leading to the machine failing to work properly and in extreme condi-

tions could lead to a fire.

12. Disconnect the machine from the power supply immediately if it emits any strange odour,

smoke or strange noises. If this precaution is ignored, the machine could overheat and a fire

may occur.

13. Do not insert any metal objects into the machine through the ventilator fan or other part of the

casing, it could make contact with a high voltage conductor inside the machine and cause an

electric shock.

Otros manuales para 3124 - Phaser B/W Laser Printer

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora todo en uno de Xerox

Xerox

Xerox WorkCentre Pro 65 Manual de usuario

Xerox

Xerox WorkCentre 6400S Manual de usuario

Xerox

Xerox EC8036 Manual de usuario

Xerox

Xerox WorkCentre 7300 Series Manual de servicio

Xerox

Xerox WC5016 Manual de usuario

Xerox

Xerox WorkCentre 4250 Manual de usuario

Xerox

Xerox Xerox Phaser 6600 Manual de usuario

Xerox

Xerox 4150xf - WorkCentre B/W Laser Manual de usuario

Xerox

Xerox VersaLink B7025 Manual de funcionamiento

Xerox

Xerox WorkCentre 3025 Manual de funcionamiento

Xerox

Xerox Wide Format 6030 Manual de usuario

Xerox

Xerox VersaLink C625 Manual de usuario

Xerox

Xerox B1025 Manual de servicio

Xerox

Xerox PHASER 6121MFP Manual de funcionamiento

Xerox

Xerox WorkCentre XE90 Manual de usuario

Xerox

Xerox WORKCENTRE PE 220 Manual de usuario

Xerox

Xerox WorkCentre 4260 Series Manual de instrucciones y seguridad

Xerox

Xerox WorkCentre 7970 Manual de usuario

Xerox

Xerox WorkCentre 7232 Manual de usuario

Xerox

Xerox PHASER 8560MFP Manual de funcionamiento

Xerox

Xerox 5700 Series Manual de usuario

Xerox

Xerox WorkCentre Pro 657 Manual

Xerox

Xerox VersaLink B7025 Manual de lista de piezas

Xerox

Xerox ColorQube 9201 Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario