xDEEP BLACK BT Manual de usuario
User’s manual
Firmware version 2.3.x
1. xDEEP BLACK BT
xDEEP BLACK BT is a diving instrument measuring time and depth (Bottom Timer), in
which we have incorporated the cutting edge technology and high quality
components of the world leading manufacturers.
While creating BLACK BT, we did our best to satisfy your expectations and make
your dives safer and more pleasant. If you have any remarks to BLACK BT, do not
hesitate to contact us. We will be happy to know your opinion.
You can update xDEEP BLACK BT to both nitrox (BLACK EANx) and trimix (BLACK
TMX) computers. For more information please visit this website:
http://support.xdeep.eu.
Attention: If a font of this printed manual is too
small, you can download it in .pdf version from:
www.xdeep.pl/download
As we’re constantly developing BLACK BT software and some
functions may change or extend, if you come across any
discrepancies download the latest version from the above
mentioned website.
2. CONFORMITY WITH THE EU STANDARDS
BLACK BT was subject to certification issued by notified body and satisfies the
requirements of EN 13319:2002 standard „Diving accessories – Depth gauges and
combined depth and time measuring devices –Functional and safety requirements,
test methods”, which was confirmed by the certificate of conformity
CW/GPS/01/2013. The CE marking visible on the instrument indicates conformity
with directive 2001/95/EC.
BLACK BT was produced by:
XDEEP spółka z ograniczoną odpowiedzialnością sp. k.
ul. Ogrodników 3, 43-227 Góra, Poland
Attention: BLACK BT consists of built-in lithium-ion battery; therefore it
should be properly disposed of after withdrawal from use. In order to
receive more information on the disposal of devices containing
batteries, contact the vendor or the local authorities.
3. ATTENTION
In this manual some information was marked in a special way by presenting it in a
frame with an international symbol. Pay special attention to it.
This symbol is used to indicate significant practical information
related to the use of the BLACK TMX.
This symbol was used to indicate information and principles crucial
for safety, which, if unknown or not obeyed, may lead to damage of
the device or pose high risk of injuries or death resulting from
incorrect operation of the device.
4. READ BEFORE USE 1/3
This manual contains a lot of information very important for your safety. Therefore,
you must read it carefully and understand it before you start diving with the BLACK
BT. Make sure you understand correctly all information. Otherwise, there is a very
significant risk of serious injury or even death resulting from incorrect use of the
device.
Warning!
It is likely that the BLACK BT software still contains some errors.
We put a lot of effort into finding them and tested the software
carefully, but we need to assume that some errors still remain
undetected.
Those errors may cause the device to show incorrect data during
the dive, reset or even completely shut off during the dive. It must
be assumed that BLACK BT as any electronic device will fail sooner
or later. Electronic devices cannot replace knowledge and proper
training. During the dive never rely only on one source of
information about current depth, dive time and decompression
time and/or no-decompression limits.
Use spare device to measure time and depth and dive tables.
Make sure that you can finish the dive safely in case you lose the
bottom timer or it will fail during the dive.
5. READ BEFORE USE 2/3
BLACK BT is not a diving computer and fails to provide information on no-
decompression limit (NDL) and decompression stops. Before you use BLACK BT
always plan carefully your dive using the appropriate tables and software in order
to be in line with the knowledge you have obtained during the training.
BLACK BT requires basic knowledge of diving which is communicated during the
appropriate and properly conducted diving course. This is the reason why BLACK
BT cannot be used by individuals who have not completed a full diving training by
recognized training agency, except for situations when BLACK BT is used for
training purposes under instructor supervision.
BLACK BT can never be the only device measuring depth and time you take under
water. Remember that it is strongly required you to have a backup device
measuring diving depth and time which can be used in case of main device failure.
Before the first use, set up carefully and understand all parameters and learn how
to use all of the functions and after reading this manual, practice using the
bottom timer during shallow dives (up to 10m) in safe conditions.
Before you move to further instructions or/and start using BLACK BT
bottom timer, read carefully all warnings and information described
below and always follow them.
6. READ BEFORE USE 3/3
Always consider the fact that BLACK BT like any other electronic device can fail
and provide you with incorrect depth, time and ascent rate data, despite the
apparently proper operation. In case you notice software malfunction or errors,
stop using it for dives and contact the manufacturer immediately.
Exceeding the maximum ascent rate can cause decompression sickness, resulting
in serious injury or death. Never exceed optimal and maximum ascent rate
recommended by the diving agency you obtained certificates from, regardless of
vertical speed indicator (VSI) displayed on BLACK BT.
BLACK BT is equipped with o-ring seals, which does not require any maintenance
during the entire use process. Battery should be replaced at the service centre
authorized by the device manufacturer. Opening the device by untrained
individuals can result in device damage or improper operation/malfunction, which
results in the loss of guarantee.
If you observe incorrect operation of your device or any errors in its software,
under no circumstance should you use it for diving, instead immediately contact
the producer.
Never use software from any other source than the manufacturer’s website
providing updates for the device. Such software can include errors leading to
improper device operation, which may result in injury or even death.
7. BASIC ELEMENTS
Mounting points of strap
and bungee cords.
Ambient light
sensor
OLED 1.8” Screen
USB
port
Pressure
sensor
8. STRAP ASSEMBLY
BLACK BT can be fixed on the hand with the supplied strap. In order to fix it, you
need to thread the strap through the holes in the case, as shown in figure below:
9. BUNGEE CORD MOUNTING
BLACK BT has four holes for bungee cord mounting:
In order to install the bungee cord:
1. Tie a knot at the end of the cord. Next, thread the bungee cord through A hole so
that the knot is placed from the display side.
2. Thread the end of the bungee cord through holes B, C and D. The length of the
knot between holes A-B and C-D should be adjusted to the hand size.
3. Tie a knot in the appropriate place on the free end of bungee cord. Cut the
remaining bungee part and singe it with a lighter.
It is advisable to tie a knot between points B and C as protection
against the loss of device, in case the bungee cord should break.
Tabla de contenidos
Otros manuales de Instrumento de buceo de xDEEP
