X-Vision XIP3101 Guía de configuración
Model: XIP3101
Wireless IP Camera with IR Night
Vision & 3G Mobile Phone Access
Model:
XIP3101
Wireless IP Camera with IR Night
Vision & 3G Mobile Phone Access
Beforeyou begin
•
Please unpack the box carefully and identify that all the parts are present.
•
Do not cut the camera cables, this will void the warranty.
•
Make sure you use only the recommended power supply. Damage caused to the camera by
incorrect voltage or wiring is not covered by the warranty.
The camera is suitable for indoor or outdoor use (using optional housing). Please bear in mind
the following points when choosing a mounting position.
•
The camera must be positioned so that it will not point directly into the sun (sunrise and
sunset) or any bright light, as this may cause damage to the camera.
•
Avoid viewing areas where half the area is in bright sunlight and the other half is dark,
such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with
such a large lux level variation.
IP CCTV
Advanced Installation Guide
Optional Weather Resistant
Housing & Bracket
(Model: XIP3000H)
PREFACE
Thank you for purchasing the XIP3101 Wireless IP CCTV Camera, a
powerful IP CCTV camera with 2-way audio function that provides
high-quality images and audio via an Internet connection. The Infrared
LEDs and light sensor enable the camera to capture images even in a
dark environment. The camera can be installed as a standalone system
within your application environment easily and quickly, and supports
remote management function so that you can access and control it
using a Web browser on your PC.
This Advanced Installation Guide provides you with the instructions
and illustrations on how to use your camera, which includes:
Chapter 1 Introduction to Your Camera describes the features of
the camera. You will also know the components and
functions of the camera.
Chapter 2 Hardware Installation helps you install the camera
according to your application environment. You can use
this camera at home, at work, at any whereyou want.
Chapter 3 Accessing the Camera lets you start using your camera
without problem. The camera can be set up easily and
work within your network environment instantly.
Chapter 4 Configuring the Camera guides you through the
configuration of the camera using the web browser on
your PC.
Chapter 5 Appendix provides the specification of the camera and
some useful information for using your camera.
NOTE The illustrations and configuration values in this guide
are for reference only. The actual settings depend on
your practical application of the camera.
-1-
-2-
Contents
Preface ..........................................................................................................1
Chapter 1 Introduction To Your Camera.....................................................3
1.1 Checking the Package Contents ...................................................3
1.2 Getting to Know Your Camera ......................................................4
1.3 Features and Benefits ....................................................................6
1.4 System Requirement .....................................................................8
Chapter 2 Hardware Installation .................................................................9
2.1 Installing the Camera Stand ..........................................................9
2.2 Connecting the Camera to LAN/WLAN.......................................10
2.3 Applications of the Camera.........................................................11
Chapter 3 Accessing the Camera ..............................................................12
3.1 Using IPFinder..............................................................................12
3.2 Accessing to the Camera .............................................................13
3.3 Configuring the IP Address of the PC..........................................16
Chapter 4 Configuring the Camera ...........................................................17
4.1 Using the Web Configuration......................................................17
4.2 Using Smart Wizard .....................................................................18
4.3 Basic Setup...................................................................................21
4.4 Network Settings .........................................................................23
4.5 Setting up Video & Audio ............................................................29
4.6 Event Server Configuration .........................................................34
4.7 Motion Detect..............................................................................37
4.8 Event Config ................................................................................38
4.9 Tools.............................................................................................41
4.10 USB...............................................................................................43
4.11 Information..................................................................................45
Chapter 5 Appendix...................................................................................46
A.1 Specification ................................................................................46
A.2 Glossary of Terms.........................................................................48
CHAPTER 1
INTRODUCTION TO YOUR CAMERA
1.1 Checking the Package Contents
Check the items contained in the package carefully. You should have
the following:
lOne Wireless IP CCTV Camera.
lOne AC Power Adapter.
lOne External Antenna.
lOne Camera Bracket.
lOne Ethernet Cable (RJ-45 type).
lOne Installation CD-ROM.
lOne Quick Installation Guide.
NOTE Once any item contained is damaged or missing, contact your
local distributor.
-3-
1.2 Getting to know your Camera
-4-
Power LED indicates
the camera is powered
on with the steady
amber light
Lens Assembly
Link LED indicates the
camera’s network
connectivity with the
flashing green light
Light Sensor (optional)
is used to trigger on and
off the Infrared LEDs
according the
environmental light level.
Infrared LEDs (optional)
allows your camera to
capture clear image in a
dark environment.
Internal Microphone
allows the camera to
receive sound and voice.
USB Port*allows you to
connect an external USB
device.
It provides the power
distribution up to 500mA.
USB Unmount Button is
used to remove the
connected USB device
safely.
*The camera’s USB port supports WCN (Windows Connect Now)
technology, which allows you to use the notebook computer to set
up and storeyour wireless networking configuration on the USB
storage device, and then retrieve the wireless settings when you
connect the USB storage device to the camera.
NOTE After pressing the Unmount button for four seconds, the
Power LED starts flashing. When the Power LED resumes the steady
amber light, you can remove the USB device safely.
Front View
External Antenna
Screw Hole is used
to connect the camera
stand.
Audio-out Connector (for 2-
way audio model) is used to
connect an external active
speaker.
Ethernet Cable Connector
is used to connect the network
cable, which supports the NWay
protocol so that the camera can
detect the network speed
automatically.
DC Power Connector
is used to connect the
AC power adapter, in
order to supply power
to the camera.
Reset Button will restart
the camera when it is
pressed quickly; when it is
long pressed for five
seconds, the camera will
resume the factory default
settings.
Rear View
-5-
1.3 Features and Benefits
MPEG4/MJPEG/RTSP Supported
The camera provides you with excellent images by the
MPEG4/MJPEG/RTSP triple codec selectable technology, allowing
you to adjust image size and quality, and bit rate accordingly to
the networking environment.
Audio Capability
The built-in microphone of the camera provides on-the-spot
audvia the Internet, allowing you to monitor the on-site voice. In
addition, you can connect an external speaker to the camera to
speak through the camera; the camera is embedded with echo
cancellation processor to provide a better sound quality.
Day & Night Surveillance Supported
The six Infrared LEDs around the lens enable the camera to
capture crystal clear images in a dark environment or at night.
When the Light Sensor detects the environmental light level
dropping, the camera captures the images in black & white
mode and turns on the infrared LEDs.
Supports Triple Streaming Profiles
The camera supports multiple profiles simultaneously, so that
you can separately set up different image settings (such as image
quality and frame rate) for MJPEG, MPEG4 and 3GPP.
Supports RTSP
The camera supports RTSP (Real Time Streaming Protocol), which is
atechnology that allows you to view streaming media via the
network. You can view the real-time video with the Quick Time
player or RealPlayer. To view the real time streaming image on
your computer, open the Web browser and enter the RTSP link:
rtsp://(IP address of the camera)/mpeg4.
n
n
n
n
n
-6-
Remote Control Supported
By using a standard Web browser or the bundled Xview
Recording & Viewing Software software application, the
administrator can easily change the configuration of the camera
via Intranet or Internet. In addition, the camera can be upgraded
remotely when a new firmware is available. The users are also
allowed to monitor the image and take snapshots via the
network.
Supports Connection to the External Devices
With the auxiliary Input/Output connectors, you can connect the
camera to a variety of external devices, such as the external
speaker and the USB device.
Multiple Platforms Supported
The camera supports multiple network protocols, including
TCP/IP, SMTP e-mail, HTTP, and other Internet related protocols.
Therefore, you can use the camera in a mixed operating system
environment, such as Windows 2000 and Windows XP.
Multiple Applications Supported
Through the remote access technology, you can use the cameras
to monitor various objects and places for your own purposes. For
example, babies at home, patients in the hospital, offices and
banks, and more. The camera can capture both still images and
video clips, so that you can keep the archives and restore them
at any time.
3G Mobile Phone/PDA Support
The camera can be viewed live using any compatible 3G Mobile
Phone or PDA that supports 3GPP, Real Player or Quick Time.
n
n
n
n
n
-7-
1.4 System Requirement
Networking
LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet.
WLAN: IEEE 802.11b/g (Model XIP3001 only).
Configuring the Camera:
CPU: Pentium 3, 350MHz or above
Memory Size: 128MB or above
Resolution: 800 x 600 or above
Browser: Internet Explorer 6.0 or above
Operating Systems: Windows 2000/XP/Vista
Viewing the Camera:
CPU: Pentium 3, 350MHz or above
Memory Size: 128MB or above
Resolution: 800 x 600 or above
Browser: Internet Explorer 6.0 or above, Apple Safari 2.0 or
Mozilla Firefox
Operating Systems: Windows 2000/XP/Vista, Apple OSX
*Please note audio is not available when using Safari or Firefox
Accessing the camera using Xview Recording & Viewing
Software
Resolution: 1024 x 768 or above
Operating Systems: Windows 2000/XP/Vista
NOTE If you connect multiple cameras to monitor various places
simultaneously, you are recommended to use a computer with
higher performance.
n
n
n
n
-8-
1camera connected:
CPU: Pentium 3, 800MHz
Memory Size: 512MB
2to 4 cameras connected:
CPU: Pentium 3, 1.3GHz
MemorySize: 512MB
5to 8 cameras connected:
CPU: Pentium 4, 2.4GHz
Memory Size: 1.0GB
9to 16 cameras connected:
CPU: Pentium 4, 3.2GHz
MemorySize: 1.0GB
CHAPTER 2
HARDWARE INSTALLATION
2.1 Installing the Camera Stand
The camera comes with a camera stand, which uses a swivel ball
screw head to lock to the camera’s screw hole. When the camera
stand is attached, you can place the camera anywhere by mounting
the camera through the three screw holes located in the base of the
camera stand.
-9-
Otros manuales para XIP3101
1
Tabla de contenidos
Otros manuales de Cámara IP de X-Vision
X-Vision
X-Vision XIR504 Guía
X-Vision
X-Vision X2C4000 Manual de usuario
X-Vision
X-Vision VIS600E Manual de usuario
X-Vision
X-Vision XPB650 Manual de usuario
X-Vision
X-Vision XPB750WIR Manual de usuario
X-Vision
X-Vision pro-hd Manual de usuario
X-Vision
X-Vision XPB621 Manual de usuario
X-Vision
X-Vision XPB731WIR-2 Manual de usuario
X-Vision
X-Vision XPB700WDR Manual de usuario
X-Vision
X-Vision X720D Manual de usuario
X-Vision
X-Vision XIP3101 Manual de usuario
X-Vision
X-Vision X101T Manual de usuario
X-Vision
X-Vision XP5000T Manual de usuario
X-Vision
X-Vision X2C4000BP Manual de usuario
X-Vision
X-Vision X720B Manual de usuario
X-Vision
X-Vision VIS449EX Manual de usuario
X-Vision
X-Vision VIS600ZR Manual de usuario
X-Vision
X-Vision Pro HD Manual de usuario
