Wyrestorm Synergy SYN-TOUCH10 Manual de usuario
SYN-TOUCH10
Synergy™ 10.1” All-In-One Touchpad Controller
Quickstart Guide
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the
installation process.
IMPORTANT! Installation Requirements
• Read through the Wiring and Connections section for important
wiring guidelines before creating or choosing premade cables.
• Visit the product page to download the latest rmware, document
version, additional documentation, and conguration tools.
• The SYN-TOUCH10 is PoE compatible. To power the touchpad, simply
plug it into a 802.3at compatible network switch. If the network
switch is not PoE capable, a PoE injector (sold separately) can be
used, as well as the included 12V PSU.
Copyright © 2022 WyreStorm ProAV Corporation | wyrestorm.com
SYN-TOUCH10 Quickstart Guide | 221210 1 of 2 INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)
In the Box
1x SYN-TOUCH10 Touchpad
1x Table Top Stand
1x Wall Mount (US/UK/EU)
1x DC 12V PSU (US/UK/EU/AU)
4x Expansion Screws
4x Mounting Screws
1x M3L8 Hexagonal Screw
1x M3L8 Phillips Head Screw
1x Quickstart Guide
Port/Button Description Guide
Before installation, please make note of the ports, descriptions and locations.
Table Mounting Installation
WyreStorm recommends that this section is read through in its entirety before to ensure proper installation and avoid damaging the equipment.
Use the four Mounting
screws provided and place
through the holes on the
back of the table mount
Screw the four Expansion
screws into the back of
the SYN-TOUCH10
Port/Button Description
SD Card Insert a SD card for loading an existing
conguration le
Audio Out Reserved
USB 2.0 Connect to a USB flash drive for loading
existed conguration le
Serial Reserved
Port/Button Description
RJ45 LAN connection for PoE+ and Control
OTG Reserved
DC DC 12V power input for use if LAN
connection does not support PoE
On/Off Button to Power unit On/Off
Table and Wall Mount Dimensions
90mm/3.54in
142mm/5.59in
180mm/7.08in
90mm
/3.54in
80mm/3.14in
36.78mm/1.44in
80mm/
4.40in
80mm/
0.64in
80mm/
1.57in
• The use of patch panels, wall plates, cable transmitters, kinks in cables, and
electrical or environmental interference will have an adverse effect on
signal transmission which may limit performance. Steps should be taken to
minimize or remove these factors completely during installation for best
results.
• WyreStorm recommends using pre-terminated RJ45 cables due to the
complexity of these connector types. Using pre-terminated cables will
ensure that these connections are accurate and will not interfere with the
performance of the product.
IMPORTANT! Wiring Guidelines
Wiring and Connections
WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in its
entirety before running or terminating any wires to ensure proper operation and to avoid damaging the equipment.
Copyright © 2022 WyreStorm ProAV Corporation | wyrestorm.com
SYN-TOUCH10 Quickstart Guide | 221210 2 of 2 INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)
Warranty Information
WyreStorm Technologies ProAV Corporation warrants that its products to be free from defects in material and workmanship under normal
use for a period of ve (5) years from the date of purchase. Refer to the Product Warranty page on wyrestorm.com for more details on our
limited product warranty.
Wall Mounting Installation
WyreStorm recommends that this section is read through in its entirety before to ensure proper installation and avoid damaging the equipment.
US Screw
Holes
UK/EU
Screw
Holes
Note: Before installation, make note of the
US and UK/EU screw holes shown in the
graphic above for respective backboxes.
Once the respective backbox has been
installed, use the mounting screws
provided to attach the wall mount to
back box.
To attach the SYN-TOUCH10, slot the
mount key into the keyhole on the back
of the tablet and use one of the provided
M3L8 screws to secure in place
Otros manuales para Synergy SYN-TOUCH10
2
Otros manuales de Panel táctil de Wyrestorm
Manuales populares de Panel táctil de otras marcas
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manual de usuario
YASKAWA
YASKAWA TP 610C Manual de usuario
B&R
B&R Power Panel C Series Manual de usuario
Beijer Electronics
Beijer Electronics X2 control Manual de usuario
AXIOMTEK
AXIOMTEK GOT321W-521 Manual de usuario
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manual de usuario
