3
Product Introduction
Thanks for choosing the HDMI V2.0 1x2 Splitter, which can distribute one HDMI input
to two outputs. The splitter supports HDMI video resolution up to 4K@60Hz 4:4:4,
1080p 3D, and multichannel audio formats. Besides passing EDID information from the
display, there are multiple built-in EDID settings can be selected by the 4-pin DIP switch
on the front panel. Moreover, the splitter supports convenient firmware upgrade through
Micro-USB port.
Features
⚫Supports HDMI V2.0 and the video resolution up to 4K@60Hz 4:4:4.
⚫HDMI input supports HDCP 2.3 and the outputs support HDCP Active or HDCP
Passive mode.
⚫Compatible with HDMI AOC cable, provides up to 5V 200mA power on each output.
⚫Supports video resolution down-scaling, the 4K input can be automatically
degraded to 1080p output for compatibility with 1080p display.
⚫18Gbps high bandwidth.
⚫Advanced EDID management: multiple built-in EDID settings can be selected.
⚫Built-in equalizer for signal enhancement to avoid signal attenuation in
transmission.
⚫Supports CEC pass-through.
⚫Provides LEDs to indicate the current operating status.
⚫Firmware upgrade by Micro-USB port.
Panel Description
Front Panel
①POWER LED: The LED illuminates red when power is applied.
②INPUT LED: The LED illuminates blue when there is HDMI input.
