Workzone Titanium+ BL20AL Manual de usuario
Xfinity Li-ION 20V
Instruction Manual
IMPORTANT
Read carefully before use
Keep for future reference
MODEL NUMBER
BL20AL
Version number: 004
Cordless Brushless drill driver
1300 889 028
MODEL: BL20AL PRODUCT CODE: 8213 06/2019
2
2
AFTERSALESSUPPORT
1300 889 028 (toll free) e-mail:
MODEL No.:
BL20AL • 8213 • 06/2019
Welcome
Congratulations in choosing to buy a Workzone® Titanium 20V Li-ion
Cordless Brushless drill driver.
All products bought to you by Workzone® Titanium are manufactured
to the highest standards of performance and safety and, as part of our
philosophy of customer service and satisfaction, are backed by our
comprehensive 5 Year Warranty. We hope you will enjoy your purchase
for many years to come.
When you open your packaging, rst remove all items and check there
are no parts damaged or missing. If you nd anything wrong, do not
operate the product until the parts have been replaced or the fault has
been rectied. Failure to do so could result in serious personal injury.
3
3
AFTERSALESSUPPORT
1300 889 028 (toll free) e-mail:
MODEL No.:
BL20AL • 8213 • 06/2019
The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the
date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired,
replaced or refunded at our discretion. T conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.You are entitled
to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or
damage.You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Warranty Details
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
20V Li-Ion Cordless Brushless Drill Driver
4
4
AFTERSALESSUPPORT
1300 889 028 (toll free) e-mail:
MODEL No.:
BL20AL • 8213 • 06/2019
Contents
Application 5
Package Content List 5
Parts description 6
Description of symbols 7
General Safety Warnings 8
Important information – Product care 14
Assembly 15
Operation 16
Maintenance 23
Warranty 24
Environmental protection 25
FAQ/Troubleshooting 26
Technical Specications 28
5
5
AFTERSALESSUPPORT
1300 889 028 (toll free) e-mail:
MODEL No.:
BL20AL • 8213 • 06/2019
1. Application
20V Li-ion Cordless Drill / Driver
2. Package Content List
First time users or inexperienced operators pay particular attention to the
operation of the 20V Li-ion Cordless Drill / Driver, including details of starting
and stopping and correct use of the 20V Li-ion Cordless Drill / Driver on pages
15-22, as well as the maintenance instructions on pages 23.
Intended use of 20V Li-ion Cordless Drill / Driver
NOTE: This product is for private domestic DIY use only. It is not suitable for
commercial or trade use.
This 20V Li-ion Cordless Drill / Driver is used for driving in and loosening screws
as well as for drilling in wood, metal and plastic.
The tool is to be used only for its prescribed purpose. Any other use is deemed to
be a case of misuse.
1 x 20V Li-ion Cordless Drill/ Driver Skin
1 x Belt clip
1 x Instruction manual
1 x Warranty Card & Certicate
• Remove all packing materials
• Ensure all parts on the contents
list are present
• Check the appliance, and all
accessories for transportation
damages
WARNING! Please read and understand this instruction manual
before use and keep it for your future reference. Your product
should only be passed on together with this instruction manual.
WARNING! To reduce risk of injury, only use the supplied 20V Li-Ion
battery or charger or any ALDI Xnity Plus range of 20V Li-Ion battery
packs. Other type of battery packs may burst causing personal injury
and damage. The battery pack must be charged using with ALDI
Xnity Plus 20V Li-Ion battery chargers.
6
6
AFTERSALESSUPPORT
1300 889 028 (toll free) e-mail:
MODEL No.:
BL20AL • 8213 • 06/2019
3. Parts description
1. Keyless chuck
2. Torque adjustment ring / setting
3. Two-speed gear control / selector
4. Power indicator light
5. Soft grip handle
6. Belt Clip
7. Battery pack *
8. Battery pack release button *
9. Magnet panel
10. Reverse touch pad
11. Forward touch pad
12. LED light
* Battery and charger shown only for illustrative purposes. Battery and
Charger not included with this drill.
9
10
11
12
7
6
5
8
4
12 3
7
7
AFTERSALESSUPPORT
1300 889 028 (toll free) e-mail:
MODEL No.:
BL20AL • 8213 • 06/2019
4. Description of symbols
The instruction manual, rating plate, or on the product itself, may
show these symbols. These represent important information about
the product or instructions on its use.
To reduce the risk of injury, user must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear breathing protection
Conforms to relevant standards for electrical safety and
electromagnetic compatibility.
60 Months Warranty
60
8
8
AFTERSALESSUPPORT
1300 889 028 (toll free) e-mail:
MODEL No.:
BL20AL • 8213 • 06/2019
5. General safety warning
General Power Tool Safety Warnings
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this power
tool.
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) power
tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
9
9
AFTERSALESSUPPORT
1300 889 028 (toll free) e-mail:
MODEL No.:
BL20AL • 8213 • 06/2019
shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energising power
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
10
10
AFTERSALESSUPPORT
1300 889 028 (toll free) e-mail:
MODEL No.:
BL20AL • 8213 • 06/2019
f) Dress properly. Do not wear loose clothing or jewellery.
Keep your hair and clothing away from moving parts. Loose
clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool safety
principles. A careless action can cause severe injury within a
fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from the
power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power
tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained
Tabla de contenidos
Otros manuales de Perforar de Workzone
