Woojin Digitech TOPS-7016 Manual de usuario

Tops - Series
-- 1 --
Digital Video Recorder
Tops - Series
Installation / Operation Manual

-- 2 --
Tops - Series
Copyright ⓒ 2002 by Woojin Digitech co., Ltd
All rights reserved
This operation manual was written for the 16 channel model. The
content in parts of the manual may be different from each other models.
This operation manual was written for the 16 channel model. The
content in parts of the manual may be different from each other models.
Any content in this operation manual is protected by copyrights.
No content in this operation manual may be copied or reproduced without
prior approval from copyright.
The content in this operation manual may be changed for reasons such as
improvement in product, faults in technology, or misprints.
•Windows 98, Windows ME, Windows 2000 and Windows XP are Microsoft
registered brands.
Program version 2.05/12TOPS Series
Manual
REVISION HISTORY
CommentsDateManual

-- 3 --
Tops - Series
3.6 HDD Storage Date Indicator ‥ ‥ 25
5.2 PRESET ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥483.5 D/O Status Indication & Control ‥ 25
5.1 PAN/TILT Control ‥ ‥ ‥ ‥ ‥ ‥ 473.4 Select Camera Buttons ‥ ‥ ‥ ‥ 24
5. PAN/TILT Control MODE ‥‥‥ ‥‥‥463.3 Select Audio Channel Buttons ‥ 23
4.11 SHELL ‥‥‥‥‥‥‥‥‥423.2 Screen Division ‥ ‥ ‥ ‥ ‥ ‥ 21
4.10 PASSWORD ‥‥‥‥‥‥‥413.1 Surveillance Screen Layout ‥ ‥ 20
4.9 NETWORK / HDD ‥ ‥ ‥ ‥ ‥ ‥ 403. SURVEILLANCE MODE ‥ ‥ ‥ ‥ ‥ ‥ 18
4.8 AUDIO ‥‥‥‥‥‥‥‥‥392.7 Sensor & D/O Connection ‥ ‥ ‥ 16
4.7 EXTERNAL MONITOR ‥ ‥ ‥ ‥ ‥382.6 Mounting‥‥‥‥‥‥‥‥‥15
4.6 MOTION / COLOR ‥‥‥‥‥362.5 PAN/TILT Camera Connection ‥ 14
4.5 SPEED ‥‥‥‥‥‥‥‥‥‥342.4 System Connection‥‥‥‥‥13
4.4 D/O SCHEDULE ‥‥‥‥‥‥332.3 System Rear Layout‥‥‥‥‥11
4.3 SCHEDULE ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ 31
2.2 System Front Layout ‥ ‥ ‥ ‥ ‥10
4.2 SENSOR / D/O ‥‥‥‥‥‥‥302.1 Product Content ‥‥‥‥‥‥9
4.1 CAMERA ‥‥‥‥‥‥‥‥‥282. SYSTEM INSTALLATION ‥ ‥ ‥ ‥ ‥ ‥ 9
4. CONFIGURATION MODE ‥ ‥ ‥ ‥ ‥ ‥ 261. WARING & CAUTION ‥‥‥‥‥‥‥‥5
Table of Contents

-- 4 --
Tops - Series
6.10 Smart Search ‥‥‥‥‥‥59
6.9 Save AVI File‥‥‥‥‥‥‥‥58
12. SYSTEM SPECIFICATION ‥‥‥‥‥756.8 Disk Save‥‥‥‥‥‥‥‥58
11. PROGRAM INSTALLATION ‥ ‥ ‥ ‥ ‥736.7 Print Preview and Print ‥ ‥ ‥ ‥ 57
10. WATERMARK VIEWER (Option) ‥ ‥ ‥706.6 Filtering ‥‥‥‥‥‥‥‥‥56
9. BACKUP VIEWER ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ 686.5 Search Screen Zoom & Move ‥ ‥56
8.3 Remote Surveillance Capability ‥676.4 Detail Search ‥‥‥‥‥‥‥55
8.2 Finding DVR Server at Remote ‥ 656.3 Playback Control Buttons ‥ ‥ ‥ 54
8.1 Remote Connection ‥ ‥ ‥ ‥ ‥ 646.2 Search by Date and Time ‥ ‥ ‥ 52
8. CLIENT (Remote) ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥636.1 Search Screen Layout ‥ ‥ ‥ ‥ 51
7. BACKUP MODE ‥‥‥‥‥‥‥‥‥606. SEARCH MODE ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ 50
Table of Contents

-- 5 --
Tops - Series
1. WARNING & CAUTION
!
1. WARNING & CAUTION

-- 6 --
Tops - Series
1. WARNING & CAUTION
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.
Connecting Power source to System Using 110V power source. Make sure power select switch
set to 115V(110V use)
Using 220V power source Make sure power select switch set to 230V(220V use)
NOTICE: For U.S.A and Canada regions; use only UL listed CSA labeled detachable power
cord, 3-conductor, 18 AWG, SVT or SJT type, plug rounding type parallel blade, cord
connector body-IEC 320 style to mate with appliance inlet on product.
IMPORTANT The only way to disconnect power completely is to unplug the power cord.
Make sure at least one end of the power cord is within easy reach so that you can unplug the
computer when you need to.
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISCARD
USED BATTERIES ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS.
INSTALLATION INSTRUCTION
1) This device designed to operate under Max. 40℃. When you install this device in the
rack, please consider the Max. ambient temperature. Please install this device proper
ambient temperature of all part.
2) CAUTION : When you install this device in the rack, the operating ambient temperature
may be greater than room ambient. Please consider this condition and simulate the Max.
temperature and install in an environment compatible temperature.
3) Reduced Air Flow : Installation of this device in a rack should be such that the amount
of air flow required for safe operation of this device is not compromised. Please provide
enough space to get the proper air flow.
4) Mechanical Loading –Mounting of this device in the rack should be such that a
hazardous condition is not achieved due to uneven mechanical loading.
5) Circuit Overloading : Please read the rating in the nameplate and consider appropriate
power supply and supply wiring.
6) When you are using like a power strips except direct connections to the branch circuit,
please make sure to connect reliable earthing maintained.
WARNING
This is a class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
Changes or modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment.

-- 7 --
Tops - Series
1) Avoid direct sunlight, heating equipment and electric equipment. (Danger of fire)
2) Do not place any liquid filled objects on the product.
(May cause fire, electric shock or other injuries)
3) Do not place or drop metallic objects (coins, hair pin, metal) or easily flammable
products (matches, paper) in the ventilation of the product.
(May cause fire or electric shock)
4) Do not place heavy objects on product. (May cause injury)
5) Make sure to properly insert the power plug.
(May cause fire if the connection is unstable)
6) When cleaning the product, do not use water, but use a dry cloth to gently wipe the
product. Please do not use chemicals or detergent as they cause the outer coating to
damage.
7) When in notice of smoke or weird smell, please stop usage and pull out the power plug
and contact the service center.
(Continued usage may cause fire or electric shock)
8) Do not pull the power plug with wet hands. (Danger of electric shock)
9) Do not pull on the power cord. (May cause fire or electric shock if cord is damaged)
10) Do not install product in areas of high humidity, dust or is soot-covered.
(May cause fire, electric shock or defects.)
11) Do not drop the product or cause sudden impacts.
12) Avoid areas of magnetic fields and severe vibration.
(May cause defect in product.)
13) Avoid installation in cold areas.
14) Do not disassemble or reconstruct product.
(May cause fire, electric shock or defects)
15) In case of DVR is return to operate after outage, please check the DVR operate normally.
16) We recommend to check and change CPU Cooling fan and Filter once a year. Contact
to manufacture and distributor for change.
17) Back up the important data.
To prevent loss of data. Any loss of data will not be covered under the warranty.
WARNING & CAUTION
!
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that there are important operating
and maintenance instruction in literature accompanying
this unit.
This symbol indicates that dangerous voltage constituting
a risk of electric shock is present within this unit.
1. WARNING & CAUTION

-- 8 --
Tops - Series
2. SYSTEM INSTALLATION
2. SYSTEM INSTALLATION

-- 9 --
Tops - Series
RS-485 Converter
Option
2
345
6 7
8
1
2
3
4
5
6
7
8
DVR System
Manual
Keyboard
Program CD & Windows CD
Rack Mount , Screw & Key
Mouse
Power Cable
485 Converter
1
2. SYSTEM INSTALLATION
2.1 Product Content

-- 10 --
Tops - Series
2.2 System Front Layout
1
2
3
4
Power LED
The LED will turn on green when power is on.
Hard Disk LED
Will blink red whenever video and audio is saved in HDD.
Power Switch
Switch ON/OFF the DVR.
3.5 inch Floppy Disk Drive
Used to install and back up on 3.5 inch floppy disks.
POWER SW
HDD
POWER 1
2
3
4
2. SYSTEM INSTALLATION
Este manual sirve para los siguientes modelos
8
Tabla de contenidos

















