Woodpecker UDS-A Manual de usuario
Guilin Woodpecker Medical Instrument Co.,Ltd.
Website：www.glwoodpecker.com
ULTRASONIC PIEZO SCALER
INSTRUCTION MANUAL
(Please read this manual before operating)
UDS-A
Contents
1.The installation and components of equipment
1.1 Instruction
1.2 Components
1.3 The main technical specifications
1.4 Installation of the main components
2.Product function and operation
2.1 Scaling function
2.2 Endo function
3.Sterilization and maintenance
3.1 Sterilization of detachable handpiece
3.2 Sterilization of scaling tips,endo wrench and endochuck
3.3 Sterilization of torque wrench
3.4 Cleaning of tips,endochuck,torque wrench and endo wrench
3.5 Trouble analysis, solutions and notes
4.Precaution
4.1 Notice when using equipment
4.2 Contraindication
4.3 Storage and maintenance
4.4 Transportation
4.5 Working condition
5.After-service
6.Symbol instruction
7.Environmental Protection
1
1
1
3
3
7
7
9
10
10
10
10
11
11
13
13
14
14
14
14
15
15
16
8.For technical data, please contact 16
16
9. Declaration of conformity
1.1 Instruction
Guilin Woodpecker Medical Instrument Co., Ltd. is a professional
manufacturer in researching, developing and producing ultrasonic piezo
scaler. The product is mainly used for teeth cleaning and also an
indispensable equipment for tooth disease prevention and treatment. The
product UDS-A ultrasonic piezo scaler has scaling , perio and endo
functions. It contains the following features:
1.Automatic frequency tracking ensures that the machine always works
on the best frequency and more steadily.
2.The handpiece is detachable and can be autoclaved under the high
0
temperature of 135 C and the pressure of 0.22MPa.
3.Digitally controlled, easy operation and more efficient for scaling.
These features make UDS-A become a new generation product in the
world dental market nowadays.
1
1.The installation and components of equipment
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Description
Main unit
133mm × 58mm× 35mm
100mm × 62mm× 36mm
/
/
/
/
/
/
/
/
Detachable handpiece
Adapter of power supply
Foot switch
Scaling tip
Water line
Torque wrench
Handpiece decorative ring
Waterproof "o" ring
Packing list
Instruction manual
Warranty card
Qualified certificate
Endochuck
Endo wrench
Type
2
The Woodpecker scaling tips and their accessories are not listed in
this instruction manual completely. The detail can be found in the
instruction for tips and packing list attached to the machine.
18mm×117mm
6mm× 4mm
32mm×39mm
17mm× 15.4mm×2mm
3.2mm×1.1mm
1.2 Components
1.2.1 The following parts should be included in a complete"Woodpecker"
UDS-A ultrasonic piezo scaler
1.2.2 Product performance and structure
a）Ultrasonic piezo scaler is composed of electrocircuit, waterway and
ultrasonic transducer.
1.2.3 Scope of application
a）Ultrasonic piezo scaler UDS-A is used for the dental calculus
elimination and root canal treatment.
±
1.3 The main technical specifications
1.3.1 Technical specifications of ultrasonic scaler
a）Power source Input: 100V-240V~ 50Hz/60Hz 1.2A (max)
b）main unit input: 30VDC 1.3A
c）Output primary tip Vibration excursion:≤100μm
d）Output half-excursion force:＜2N
e）Output tip Vibration frequency:28kHz 3kHz
f）Output power: 3W ~20W
g）main unit fuse: 250V/ T 1.6AL
h）power source fuse: 250V /T 2.0AL
i）Water pressure: 0.1bar~5bar (0.01MPa ~0.5MPa)
j）Weight of main unit:0.65kg
k）Weight of power source:0.3kg
l）main unit volume:184mm× 134mm × 80mm
m）Operating mode: Continuous operation
n） Type of protection against electric shock: Class II
o） Degree of protection against electric shock : Type BF equipment
p） Degree of protection against harmful ingress of water:Ordinary equipment
(IPX0) , Protection degree against water(used on the switch): IPX1
q) Degree of safety of application in the presence of a Flammable Anaesthetic
Mixture with air or with Oxygen or Nitrous Oxide:Equipment not suitable for
being used in the presence of a flammable anaesthetic mixture with air or with
oxygen or nitrous oxide
3
1.4 Installation of the main components
1.4.1 Sketch map for installation and connection.
a)The components of the equipment
4
Picture 1
Power s
witch
Socket for
foot switch
Socket for
power supply
Water entrance
Water control
knob
Scaling indicator
Endo indicator
Perio indicator
Options switch
Decreasing power
switch
Increasing power
switch
Power indicator
Picture 2
Picture 3
b、)Sketch map for connection of foot switch power supply and main unit
c)Sketch map for connection of wate supply system
5
Plug of
foot switch Foot s switch ocket
Foot switch
Plug of foot switch
Power supply
Socket for power supply
Power cord plug
Power cord plug
Input voltage 100V-240V～
Cap of one-way connector
Connect pure water
Water line
Water entrance
6
d)Sketch map for connection of detachable handpiece
Nipple
Seal
The connector of cable
Handpiece
Nipple Seal
Shaft
Handpiece
Picture 4
Autoclavable
symbol Brand CE mark The connector
of cable
Handpiece
Cable
e)Sketch map for how to install tip and endochuck with wrench
Picture 5
I
O
Torque wrench
Tip Handpiece
Screw on
Screw on
Screw on
Endochuck Endo wrench File
7
2.1 Scaling function
2.1.1Usage
a) Open the packing box, make sure that all the parts and accessories are
complete according to the packing list. Take the main unit out of the box
and put it on a stable plane.
b) Turn the water control switch to the max based on symbol as shown
as 3.5.2[note 1].
c) Insert the plug of the foot switch to its socket(picture 2).
d) Connect one end of the water line to the water entrance, and the other end
to the pure water source(picture 3).
e) Screw the scaling tip tightly to handpiece by torque wrench, then connect
the handpiece and the connector of cable correctly.
f) Insert the plug of the power source to its socket ,then get through to
the electricity (picture 2).
g) Switch on the main unit, then the scaling indicator and the first five lights
of power regulator shine.
h) Select a suitable scaling tip as you need, screw it on the handpiece tightly
by the torque wrench(picture 5).
i) The normal frequency is extremely high. Under the normal working state
of scaling tips , a light touch and a certain to-and-fro motion will eliminate
the tartar without heating. Overexertion and long-time lingering are forbidden.
j) Vibrating intensity: Adjust the vibration intensity as you need, generally
turn the knob to the middle grade. According to patients’ different sensitivity
and the rigidity of the gingival tartar, adjust the vibration intensity during the
clinical treatment.
k) Water volume adjust: Step on the foot switch, and the tip begins to vibrate,
then turn the water control switch to form fine spray to cool down the hand-
piece and clean the teeth.
l) The handpiece can be handled in the same gesture as a pen in hand.
2.Product function and usage
m) During the clinical treatment, be sure not to make the end of tip touch the
teeth vertically and not to make the tip overexert on the surface of the teeth
in case of hurting the teeth and damaging the tip.
n) After finishing operation, keep the machine working for 30 seconds on the
water supply condition in order to clean the handpiece and the scaling tip.
o) Unscrew the scaling tip and pull out handpiece, then sterilize them.
Notice: Don't pull out the handpiece when the foot switch is stepped on and
the machine is vibrating.
2.1.2 Instruction for main components of detachable handpiece (showed in
picture 4)：
a) Nipple: The nipple can be removed. You can screw out the nipple and
clean the pole with alcohol termly.
b) Handpiece seal：The seal can be removed and cleaned with alcohol termly.
c) Handpiece: The main part of the whole handpiece, can be autoclaved under
the high temperature and pressure.
d) The connector of the cable：Connect the handpiece with the water source
and power supply of the main unit.
Notice: Keep dry when the detachable handpiece connect to the connector
of the cable.
2.1.3 Torque wrench use instruction (showed in picture 5)
a) The torque wrench's structure is designed in special way which can control
the strength of the scaling tip's installation properly and correctly. It also can
guarantee the operator screw or unscrew the scaling tip effectively and keep
their hands away from being scratched.
b) Operation
① Take the scaling tip into the torque wrench; operate as showed in picture 5.
② Tip installation: Hold the handpiece turn the tip toward direction as showed
In picture 5 with the torque wrench. Turn two more circles when the tip stops,
then the tip is installed.
③ Tip uninstallation: Hold the handpiece, turn the wrench toward anti-clockwise
8
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Convertidor de medios de Woodpecker
