Wirepath WPS-550-BUL-A-GR Manual de usuario
CAMERA
BULLET
INSTALLATION MANUAL
Review manual thoroughly before installation.
Retain for future reference.
WPS-550-BUL-A-WH
WPS-550-BUL-A-GR
2
WPS-550-BUL-A Installation Manual
CONTENTS
Safety Instructions...............................................................................3
Features............................................................................................... 4
Package Contents............................................................................. 5
Installation Instructions....................................................................... 7
Set-Up...................................................................................................10
1. Operating The OSD Menu..................................................... 10
2. OSD Menu Structure...............................................................10
3. OSD Menu Settings................................................................. 14
3.1 Lens.................................................................................14
3.2 Exposure.........................................................................14
3.3 White Balance...............................................................15
3.4 Backlight.........................................................................16
3.5 Day & Night....................................................................17
3.6 DPC.................................................................................18
3.7 Special............................................................................18
3.8 Comm Adj......................................................................22
3.9 Reset............................................................................... 23
3.10 Exit.................................................................................23
RS485 System Diagram.......................................................................24
Troubleshooting...................................................................................25
Specications......................................................................................27
Dimensions...........................................................................................28
Warranty.............................................................................................. 29
3
WPS-550-BUL-A Installation Manual
© 2013 Wirepath Surveillance
SAFETY INSTRUCTIONS
This information is provided to ensure your safety and to prevent
physicalornancialloss.Pleasereadthisdocumentcarefullybefore
installing and operating the camera.
1. Handle with care.
Use caution when handling to avoid damage to sensitive internal
components.
2. Do not install camera under extreme temperatures.
This camera only operates under temperature conditions between
14˚F~140˚F.
3. Do not mount the camera directly facing bright light sources.
Exposing the camera to strong light over long periods of time will
damage the camera’s sensor.
4. Do not supply voltage other than 12~30V DC or 24V AC.
This camera regulates power within this range. Higher voltages will
damage the camera’s electronic components.
5. Do not install camera in environments with extreme humidity.
Installing camera in environments with extreme humidity may cause
moisture to condense on the surface of the lens or dome cover,
which can affect picture quality.
4
WPS-550-BUL-A Installation Manual
FEATURES
• 1/3”SonySuper-HADIICCD
The Sony Super HAD II CCD is ideal for low lux illumination, resulting in
a clear and crisp image.
• VarifocalAuto-IrisLens
This camera features a varifocal lens with a focal length of 3.7-12 mm. The
auto-iris function intuitively manages the amount of light passing through the
lens for consistent image brightness.
• DWDR(DigitalWideDynamicRange)
DWDR is ideal for high contrast environments, improving the contrast
between very dark and very bright areas in a scene and producing a more
balanced image.
• 2DDigitalNoiseReduction
Digital noise reduction produces clear images in low light conditions. Not
only does it help to reduce image noise, but it also minimizes objects from
becoming blurred when in motion, producing extremely clear picture quality
even under low-light conditions.
• RS-485ConnectionandOSD
This camera features an OSD (on-screen display) for initial setup and settings
adjustment. Remote control is possible using a compatible DVR or PTZ
controller connected to the camera’s RS485 wire leads.
• WeatherproofHousing
The IP66-rated weatherproof housing makes this camera ideal for outdoor
surveillance.
• ExternalZoomandFocusAdjustments
Adjust the camera without the need to remove the lens cap for quick
adjustments.
• VideoTestPort
Adjust angle, zoom, and focus at the camera for fast and easy installation.
5
WPS-550-BUL-A Installation Manual
© 2013 Wirepath Surveillance
PACKAGE CONTENTS
(1) WPS-550-BUL-A
(1) AC/DC Plug
(1) OSD Joystick / BNC Test Adapter
(3) Screws
(3) Wall Fasteners
NOTE: A POWER SUPPLY IS NOT INCLUDED WITH THIS CAMERA.
The PS-12DC-1A or WPS-PS multiple output power supplies are recommended.
OPTIONAL ACCESSORIES
Wirepath Surveillance offers a wide range of accessories that provide
power to the cameras, allow for various mounting options, and make
connection to the head end quick and easy.
MOUNTS
•WPS-MNT-FLUSH-BUL
Usewhenthecameraneedstobeattachedtoaushmountjunctionbox.
POWER SUPPLIES
Local Power Supplies
•PS-12DC-1A
12 Volt 1 Amp Power Supply for Cameras & IR Systems.
Remote Power Supplies
Use these remote power supplies to power all the cameras in the system
from a remote location.
•WPS-PS9-12VDC-10A
9 Output Power Supply - 12V DC, 10A - PTC Fuses
•WPS-PS9-24VAC-12A
9 Output Power Supply - 24V AC, 12A - PTC Fuses
•WPS-PS18-12VDC-18A
18 Output Power Supply - 12V DC, 18A - PTC Fuses
(1) 3mm Allen key
(1) Foam gasket
(1) Installation Manual
(1) Spare Silica
Pack in Vacuum sealed bag
6
WPS-550-BUL-A Installation Manual
WIRING ACCESSORIES
In addition to mounts and power supplies, Wirepath offers a full line of
accessories to easily send power, audio, and video over 2 conductors of Cat5
wiring back to the head end.
Visit www.snapav.com for a complete listing of accessories.
•WPS-BAL-V-PIGTAIL
Mini Passive Video Balun with Pigtail
and Screw Terminals
•WPS-BAL-V-MINI
Mini Passive Video Balun with Pigtail
and Screw Terminals
•WPS-BAL-V-COMBO
Mini Passive Video Balun with Screw
Terminals Combo Pack
Contains: 1 WPS-BAL-V-PIGTAIL and
1 WPS-BAL-V-MINI
•WPS-BAL-VP
Passive Video and Power Balun
with RJ45
•WPS-BAL-VPA
Passive Video, Power, Audio Balun
with RJ45
•WPS-BAL-VPD
Passive Video, Power, PTZ Balun with
RJ45
•WPS-ACC-PWR-F & WPS-ACC-PWR-M
DC Power Plug with Screw Terminals
Available in Male and Female
version 10packs.
•WPS-ACC-PWR-1X2
DC Power Splitter Cable - 1 Female
to 2 Male Connectors
•WPS-ACC-PWR-1X4
DC Power Splitter Cable - 1 Female
to 4 Male Connectors
•WPS-ACC-MIC
MiniMicrophone12VDCAmplied
•WPS-ACC-GND-ISO
Ground Loop Isolator Male to
Female BNCs
7
WPS-550-BUL-A Installation Manual
© 2013 Wirepath Surveillance
1. Prepare Camera for Mounting
Prior to mounting to the Camera, we recommend that the position and
anglesbepresetinordertospeedinstallation.Thesesettingscanbene-
tuned once the Camera is mounted.
A. Adjust Camera Rotation
B. Adjust Swivel of Camera
C. Adjust Camera Angle
2. Connect the Camera to the System
Recommended Cabling:
- Video RG59 or RG6
- RS485 OSD Control Cat5e/6
Important Note! Be sure to use the correct power supply
and power wire for the length of run to the camera to
ensure reliable operation. Too small a power supply or
wire will cause too much voltage drop, which will cause
the camera to operate incorrectly or not power up at all.
A
B
C
12V DC
Power In
BNC
Video Out RS485 Leads
A. Connect the BNC video output to the
video in of a DVR or monitor.
B. Connect the DC Power In to a power
supply using the included WPS-ACC-
PWR DC power adapter. The power
supply can be located at the head
end of system using a WPS-PS multiple
output power supply and prewiring a
power wire.
12V DC Power
BNC Video
Output
DC Plug
INSTALLATION INSTRUCTIONS
8
WPS-550-BUL-A Installation Manual
3. Mount the Camera
A. Mounting directly to a wall or eve:
A.1 - Use the Camera base as a template to mark the screw locations.
A.2 - Predrill holes in the marked locations.
A.3 - Connect the wires from the wall to the Cameras Pigtail and insert
them into wall.
A.4 - Position the Camera base over the marked holes from step 3-A.1.
A.5 - Secure the Camera with the provided screws.
B. Mounting to a Single gang Junction Box
We recommend the use of the WPS-MNT-FLUSH-BUL Flush Mount plate
when mounting to a single gang junction box. This plate is available in
gray or white to match the color of the Camera being used. Follow the
instructions in the WPS-MNT-FLUSH-BUL manual for using this mounting
method and then proceed to step 4.
9
WPS-550-BUL-A Installation Manual
© 2013 Wirepath Surveillance
4.Fine-TuningCameraAdjustments
The Camera is equipped with a BNC Test Port that allows for local Analog Video
output and power to the Camera for adjusting positioning, zoom, and focus.
The camera is supplied with an OSD Joystick / BNC Test Adapter that allows
for viewing the output of the camera on a monitor or the WPS-CCTV-TESTER
(not included). Use this connection to adjust the camera directly from the
installed location.
Adjust Zoom
Adjust Focus
BNC Test Adapter
Connection
A. Remove the plate located at the rear of the Cameras just before
the Cameras base to access the OSD Joystick / BNC Test Adapter
connection.
B. Connect the OSD Joystick / BNC Test Adapter to the Camera.
C. Connect the BNC on the adapter to a monitor or WPS-CCTV-TESTER
video in.
D. Connect a 12 V DC Power Supply to the Power connection on the OSD
Joystick / BNC Test Adapter if no other power connection is active.
Warning!! The Test Port adapter power connection for this camera only uses a 12 V DC
power supply. Using a 24 V AC or other voltage power supply with the Test Port Adapter
will result in damage to the camera, and possibly the power supply.
E. AdjusttheCamerasRotation,Swivel,andAngleasdenedinstep1and
secure the set screws using the supplied 3mm Allen key.
F. Adjust the Cameras Zoom (furthest from the lens) using the supplied
3mm Allen key.
G. Adjust the Cameras Focus (closest to the lens) using the supplied 3mm
Allen key.
10
WPS-550-BUL-A Installation Manual
SET-UP
OSD Menu Structure
Settingshavebeenpreconguredforoptimalperformanceinmost
applications. If adjusting the settings produces a poor picture,
factory reset the camera to restore the original settings (see p.21)
Bold indicates factory preset
LENS
EXPOSURE
DC, MANUAL
SHUTTER
BRIGHTNESS
AGC
DWDR
RETURN
ON, OFF LEVEL
RETURN
0~63(29)
AUTO, 1/60(1/50), FLK, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/5000, 1/10000, 1/100000
000~255(40)
OFF, LOW, MIDDLE, HIGH
Operating the OSD Menu
•ToviewtheOSD,theOSDJoystick/OSDJoystick/BNCTest
Adapter must be connected to a display monitor or WPS-CCTV-
TESTER (not included).
•Thebuttonfoundonthepigtailprovidesveseparateactions:
UP, DOWN, EXIT, ENTER and MENU.
•PressthebuttontoenterintotheOSDMENUpage.
•PressUP,DOWN,EXIT(Left)orENTER(Right)toselectitemsonthe
menuandbeginconguration.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
