Winson WNI-S214 Manual de usuario
1
2.4G/Bluetooth scanner user manual
Content
1. Turn on scanner...................................................................................................2
2. LED light description............................................................................................2
3. Buzzer Description...............................................................................................2
4. Configuration.......................................................................................................3
Note: theasterisk(*) to the factory defult............................................................3
5. output mode........................................................................................................3
6. Data Transfer Mode............................................................................................ 4
7. Communication Mode.........................................................................................5
8. USB interface type...............................................................................................6
9. USB-HID Data type...............................................................................................6
10. Storage Mode....................................................................................................7
11. Battery Function................................................................................................7
12. Motor Mode Set................................................................................................ 8
13. Sound Volume Set............................................................................................. 8
14. Sound Type........................................................................................................9
15. Sound frequency setting................................................................................... 9
16. Sleep Time Set................................................................................................. 10
17. GS (group separator) characters conversion.................................................. 11
18. Letter case conversion.................................................................................... 11
19. Language Set................................................................................................... 12
20. ①2.4G Wireless Setting Private.....................................................................14
②2.4G Pairing.....................................................................................................14
③2.4G Extened cache setting.............................................................................15
21.Bluetooth Setting Private................................................................................. 15
21. Show or Hide the Keyboard in IOS.................................................................. 17
22. Bluetooth HID Transfer Rate........................................................................... 17
23. Bluetooth SPP Mode....................................................................................... 18
24. Bluetooth BLE Mode........................................................................................18
25. Bluetooth Name Setting..................................................................................18
26. Get Bluetooth Name...................................................................................... 19
27. Get Bluetooth Address.................................................................................... 20
28. Software Update............................................................................................. 20
29. Data editor.......................................................................................................21
30. Hide front character shortcut settings............................................................25
31. Hide the following characters shortcut settings............................................. 26
32.Data Code Table..............................................................................................28
33.ASCII code Table..............................................................................................29
2
1. Turn on scanner
①Press and hold for 14 seconds, you will hear a beep. Release the button at this time,
"Communication Mode" switches to Bluetooth SPP mode
②Press and hold until 20 seconds, you will hear a beep, release the button at this time, the
"communication mode" switches to the Bluetooth BLE mode
2. LED light description
Green light --> charging indicator
(1) Steady on means it is charging
(2) When the battery is fully charged, it turns off
Blue light --> Status indicator
(1) Each time the code is scanned successfully, it will flash once quickly
(2) Turn off when USB or 2.4G and Bluetooth HID are not connected
(3) When the USB or 2.4G or Bluetooth is connected, it is always on
(4) When entering 2.4G or Bluetooth HID pairing, it will flash quickly and continuously
When entering Bluetooth SPP/BLE pairing, it flashes slowly
3. Buzzer Description
A long beep --> the status is:
(1) means power on (power on);
(2) Failure during Bluetooth data transmission;
A short tone --> The status is:
(1) The ordinary barcode is successfully read and uploaded successfully;
(2) The USB connection is successful;
(3) 2.4G/Bluetooth connection is successful or pairing is successful;
High and low short tones --> The status is:
(1) Obtain the setting code successfully;
(2) The stored data is successful;
(3) Uploading data is completed;
(4) Enter the shutdown state;
3
Three short beeps --> The status is:
(1) The USB/2.4G/Bluetooth connection is disconnected;
(2) Uploading data is unsuccessful or the storage Flash is full;
(3) The setting code function does not work;
Three short tones with high and low bass --> The status is:
Insufficient power, ready to enter shutdown state;
4. Configuration
Note: theasterisk(*) to the factory defult
Firmware verison
Factory default
5. output mode
USB priority output(*)
Note: When a USB is inserted, only transfer via USB
At the same time the output
Note:USB and 2.4g or bluetooth output at the same time
4
6. Data Transfer Mode
Normal run mode
Note: In normal mode, the scanned data will be uploaded immediately. If the
transmission fails, an alarm will be issued, and the data will not be saved.
Storage run mode
Note: In inventory mode, the scanned barcode will be automatically saved. If you
need to view statistical data or upload data, you can scan the corresponding set
barcode to view it.
Automatic storage mode
Note: In automatic storage mode, the data will be automatically saved when the
distance is exceeded. When you need to upload the automatically saved data,
scan the setting code "Upload all data" to upload the automatically saved data
5
7. Communication Mode
Receiver Mode
Note: To re-pair another receiver, please see the Pairing 2.4G Receiver Function
section for details
Bluetooth HID Mode
Note:Bluetooth HID mode is to switch to HID mode, and the previously paired
Bluetooth will be automatically connected. When there is a problem with the
bluetooth communication, the alarm prompts that the bluetooth entry is unsuccessful.
Bluetooth BLE Mode
Note:In Bluetooth BLE transparent transmission mode, Bluetooth devices (ie,
Bluetooth devices such as mobile phones/IPADs) need to download or develop
low-power Bluetooth BLE transparent transmission software before they can be used.
When there is a problem with the Bluetooth communication, the alarm prompts that
the Bluetooth entry is unsuccessful.
Bluetooth SPP Mode
Note:In the Bluetooth SPP transparent transmission mode, Bluetooth devices (ie,
Bluetooth devices such as mobile phones/IPADs) need to download or develop classic
Bluetooth SPP transparent transmission software before they can be used. When there
is a problem with the Bluetooth communication, the alarm prompts that the Bluetooth
entry is unsuccessful.
6
8. USB interface type
USB-HID(*)
USB-COM
9. USB-HID Data type
Keyboard function key
Send Chinese Characters
Send ASCII
7
10. Storage Mode
Clear all data
Statistical Information
Uploading all data
11. Battery Function
Battery Indicator
8
12. Motor Mode Set
OFF
ON(*)
13. Sound Volume Set
OFF
HIGH(*)
Medium
LOW
9
14. Sound Type
MCU Sound ON(*)
Scan Head Sound ON
15. Sound frequency setting
Sound frequency 2048HZ
Sound frequency 2700HZ
10
16. Sleep Time Set
No Sleep
Sleep now
10S 30S
1min(*) 2 min
5min 10min
30min
Tabla de contenidos
Otros manuales de Lector de código de barras de Winson
