Winmate EAC PRO-IK90 Manual de usuario
Please read these instructions carefully before using this product, and save this manual for future use.
Embedded Computer
EAC PRO-IK90
Quick Start Guide
V2.0
For more information on this and other
Winmate products, please visit our
website at: www.winmate.com
Document Part Number: 91521117100C
ii
FCC Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received
including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a
class "B" digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at him own expense.
European Union
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010/ A1: 2015
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2014
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013
This equipment is in conformity with the requirement of the following EU
legislations and harmonized standards. Product also complies with the
Council directions.
iii
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted
in any form or by any means, electronic or mechanical, for any purpose, without
the prior written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their
respective owners.
Disclaimer
Winmate Inc. reserve the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order
to improve design and/or performance. We assume no responsibility or liability
for the use of the described product(s) conveys no license or title under any
patent, copyright, or masks work rights to these products, and make no
representations or warranties that these products are free from patent,
copyright, or mask work right infringement, unless otherwise specified.
Applications that are described in this manual are for illustration purposes only.
We make no representation or guarantee that such application will be suitable
for the specified use without further testing or modification.
Warranty
Winmate Inc. warranty guarantees that each of its products will be free from
material and workmanship defects for a period of one year from the invoice
date. If the customer discovers a defect, we will, at his/her option, repair or
replace the defective product at no charge to the customer, provide it is
returned during the warranty period of one year, with transportation charges
prepaid. The returned product must be properly packaged in its original
packaging to obtain warranty service. If the serial number and the product
shipping data differ by over 30 days, the in-warranty service will be made
according to the shipping date. In the serial numbers the third and fourth two
digits give the year of manufacture, and the fifth digit means the month (e. g.,
with A for October, B for November and C for December).
For example, the serial number 1W17Axxxxxxxx means October of year 2017.
iv
Customer Service
We provide a service guide for any problem by the following steps: First, visit
the website of our distributor to find the update information about the product.
Second, contact with your distributor, sales representative, or our customer
service center for technical support if you need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every
business day. We are always ready to give advice on application requirements
or specific information on the installation and operation of any of our products.
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections
while the power is on. Sensitive electronic components can be
damaged by sudden power surges. Only experienced electronics
personnel should open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis lorsque
vous travaillez sur celui-ci. Ne pas brancher de connections
lorsque l’alimentation est présente. Des composantes
électroniques sensibles peuvent être endommagées par des
sauts d’alimentation. Seulement du personnel expérimenté
devrait ouvrir ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution, use a
grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded bag
when they are not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute
charge statique avant de toucher la carte CPU. Les
équipements électroniques moderns sont très sensibles aux
décharges d’électricité statique. Toujours utiliser un bracelet de
mise à la terre comme précaution. Placer toutes les
composantes électroniques sur une surface conçue pour
dissiper les charge, ou dans un sac anti-statique lorsqu’elles ne
sont pas dans le chassis.
v
CONTENTS
INTRODUCTION 1
Features 1
Ordering Information 1
Package Contents 2
Product Overview 4
Front Side I/O Connectors 4
LED Indicators 4
INSTALLATION 5
Hardware Installation 5
Connecting the Power 7
Connecting the Power 7
Power Consumption Reference 9
Backplane Board Jumpers and Connectors 10
Backplane Board Connectors 11
Backplane Board Jumpers 12
GETTING STARTED 13
How to Enable Watchdog 13
Using Recovery Wizard to Restore Computer 15
SPECIFICATIONS 16
APPENDIX 19
Appendix A: System Dimensions 19
Appendix B: Software Developer Support 20
1
INTRODUCTION
Congratulations on purchasing Winmate® EAC PRO-IK90 Embedded Computer. EAC PRO-
IK90 with 6th Generation Intel® Xeon E3 or Core™ i7/i3 processors and C236 chipset offers
high performance computing power and outstanding video processing. Abundant I/O ports and
PCI/ PCIe expansion make EAC PRO-IK90 suitable for Factory Automation, Machine Vision,
Surveillance, Machine Automation and other high-performance applications.
Features
Winmate® EAC PRO-IK90 Embedded Computer offers the following features:
6th Generation Intel® Xeon E3, Core™ i7/i3 Processors
HD 4K resolution & 4U Height Design
Flexibility, Connectivity and Multi-Expansion
High Storage Density & Easy Maintenance
9-36V Wide Voltage
-15 to 55 Celsius degrees wide temperature
Ordering Information
Processor:
Option: EAC PRO-IK90/E
Intel® Xen E3-1268L V5
EAC PRO-IK90/7
Intel® Core™ i7-6700TE
EAC PRO-IK90/3
Intel® Core™ i3-6100TE
Memory DDR4:
Option: 8GB to 32GB DDR4 SODIMM w/ECC or w/o ECC
Storage:
Option: 2.5”HDD 500GB 7200rpm SATAIII
2.5“ HDD 1TB 7200rpm SATAIII
2.5” SSD 128GB/256GB/512GB SATAIII
CFast 2.0 16GB/32GB/64GB/128GB/256GB
Expansion slot :
Option: SKU1 (1 PCIe x 16, 1 PCIe x 8 ,1 PCIe x 4 , 1 PCI)
SKU2 (1 PCIe x 16, 1 PCI , 1 PCI , 1 PCI)
Adapter:
Default: 12V/220W AC-DC Adapter
2
Package Contents
Carefully remove the box and unpack your device. Please check if all the items listed below are
inside your package. If any of these items are missing or damaged contact us immediately.
Standard factory shipment list:
EAC PRO-IK90
Embedded
Computer
Quick Start Guide
(Hardcopy)
Driver CD & User
Manual
AC Adapter
12V/ 220W
Varies by product
specifications
91521117100C
917111171007
922D220W12V0
Power Cord
4P Terminal Block
18P Terminal Block
Cable Ties (ROHS)
Varies by country
604511905D05
604511C05D01
911911101007
W/O HDD
Internal Hard Disk
Wire (Preinstalled)
94H0070070K0
3
Your package may include optional accessories based on your order:
WLAN External Antenna
WWAN External Antenna
39700000000E
39700000000F
4
Product Overview
Front Side I/O Connectors
LED Indicators
EAC PRO-IK90 Embedded Computer provides four SSD/HDD LED indicators and one WWAN/
WLAN LED indicator for status monitoring.
LED Indicator
Color
Description
WWAN / WLAN*
Off
Slot is empty; module is not yet discovered by the
system.
Green
WWAN/ WLAN operating normally.
SSD/ HDD
Off
Slot is empty; drive is not yet discovered by the system.
Green
SSD/ HDD operating normally
*Mini PCIe (CN4) only supports either WWAN or WLAN indicator.
Otros manuales para EAC PRO-IK90
1
Tabla de contenidos
Otros manuales de PC industrial de Winmate
Winmate
Winmate R10L100-SPT269 Manual de usuario
Winmate
Winmate R15IH3S-65C3 Manual de usuario
Winmate
Winmate PT Series Manual de usuario
Winmate
Winmate M-Series Manual de usuario
Winmate
Winmate W04FA3S-ELT1 Instrucciones de funcionamiento y mantenimiento
Winmate
Winmate IBDRW100-EX Manual de usuario
Winmate
Winmate 7'' S-Series Manual de usuario
Manuales populares de PC industrial de otras marcas
Dell
Dell Embedded Box PC 5000 Manual de usuario
IBASE Technology
IBASE Technology ASB200-918 Series Manual de usuario
Lenovo
Lenovo ThinkCentre M90q Manual del propietario
IXXAT
IXXAT Econ 100 Manual de usuario
Kontron
Kontron KBox A-151-TGL Manual de usuario
AXIOMTEK
AXIOMTEK ICO500-518 Series Manual de usuario