Winbook 2K701 Manual de usuario
TFT 17" LCD 2K701
. USER MANUAL
CONTENTS
General Information………………………………………1
Features……………………………………………………2
FCC Information………………………………………...2
Caution to The User………………………………….2
General Safety Precautions…………………………..3
Installation
Package Contents…………………………………….4
Control Description……………………………………..4
Connection with External Equipment…………………6
Adjust tilt base…………………………………………..7
Operation
On Screen Display Menu & Function Table…………8
Power Management System…………………………..12
Preset Timing Modes……………………………………l 2
Technical Information
Specifications…………………………………….............13
Trouble shooting……………………………………........14
General Information
Thank you for purchasing out 17” Flat screen TFT LCD Monitor. It is a high
performance, 17 inch analog signal input, color TFT LCD (Liquid Crystal Display)
monitor. The LCD employs the latest state-of-the-art flat panel display technology
providing a wider viewing angle, higher contrast ratio and greater color accuracy.
Compatible with IBM and compatible systems, this monitor is designed to operate under
a multitude of hardware platforms and video standards VGA to 1280 x 1024 non-
interlaced. Its multiscan function automatically adjusts the monitor to the scanning
frequency of your video card. Its non-interlaced and higher refreshing rate offers flicker-
free image, which reduces eye - strain and fatigue so that you can work in front of the
screen longer.
The OSD (on screen display) control system which adopt the digital controls greatly
enhances and expands your ability to control your display through adjusting the screen
settings. The adjustable desk allows you to adjust the monitor to your preferred angle of
vision. This outside adapter for led monitor also supports universal power supply,
allowing you to use the monitor anywhere in the world.
Page1
1. Features
17-inch TFT LCD with anti-glare treatment
1280 x 1024 (SXGA0 Optimal Resolution
High contrast for a sharp, crisp image
Wide viewing angle
On-Screen Display (OSD) user controls
Standard 15 Pin D-Sub VGA input
Universal power supply for outside adapter
Super-thin on desk design
Built-in stereo speakers with volume control
Standard S-Video input( optional)
TV system port( optional)
2. FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against radio frequency interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If not installed
and used in accordance with the instructions, it may cause interference to radio
communications. However, there is no guarantee that interference will not occur in
particular installation. If this equipment does cause interference to radio or television
reception (this can be determined by turning the equipment off and on), the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from which the
receiver is connected to.
Consult the dealer or an experienced radio/television technician for help.
3. Caution To The User
To assure continued FCC compliance, please use grounded power supply cord and the
provided shielded video interface cable with bonded ferrite
Page 2
cores. If a BNC cable is going to be used, use only a shielded BNC (5) cable. Also, The
Federal Communications Commission warns the user that any unauthorized changes or
modifications to the unit if not expressly approved by the party responsible for
compliance could void the user's authority of operating the equipment.
4. General Safety Precautions
The equipment should be installed near the wall socket, which should always be easily
accessible. If any faults occur with the equipment, disconnect the power supply cord from
the unit first.
(1) Environment
Place the monitor on a flat and level surface.
Place the monitor in a well-ventilated area.
Keep the monitor away from:
Rain or water
Excessive heat, cold or humidity
Areas exposed to direct sunlight
Dusty surroundings
Equipment that generates strong magnetic fields
(2) Precautions
Sit at least 18" from the TFT LCD Monitor.
Do not apply pressure to the screen. The LCD screen is delicate.
Do not touch the screen directly with fingers, which may damage the screen, and oil
from skin is difficult to clean.
Do not place heavy objects on the power cord, video audio cables, or on the LCD.
Never remove the rear cover. The display unit contains high-voltage parts. You may
suffer from electric shock if you touch these parts.
Always handle your LCD with care when moving it.
(3) Cleaning the TFT LCD Monitor:
Gently wipe the screen with a clean camel hair lens brush, or a soft, clean, lint-free
cloth. This removes dust and other particles which may scratch the screen.
Do not apply excessive pressure to the screen surface because this may damage the
LCD.
Do not pour or spray any liquid to the screen or case of the LCD monitor.
Page 3
Installation
1. Package Contents
Your package includes the following:
(1) 17" TFT LCD Monitor (2) Power Cord
(3) VGA Cable (4) Audio Cable
(5) User's manual (6) AC/DC Adapter
Video Cable(optional)
S-Video Cable
Audio Cable(optional)
Remote controller
2. Control Description
Front View
Page4
1. Power Switch
Pressing this button to turn the display system on or off
2. Power LED
This indictor illuminates when the power is turned on. It is also used to indicate each
power saving stage of monitor by changing its color (see the later for more information)
3. Select
When selecting menu item, pressing this key can confirm to enter the submenu.
4. Auto config
Pressing this key can adjust phase, clk, position automatically.
5. Up/”-“
Select the previous item/decrease value of menu item.
6. Down/”+”
Select the next item/increase value of menu item.
7. Menu/exit
Pressing this button activates the main menu/exit the submenu or main menu.
Rear View
Page 5
(1) PC Audio In
This input is for connecting the audio cable from the audio-out connection on computer.
(2) Audio In (optional)
This input is for connecting the audio cable from the audio-out connection on VCD or D
VD.
(3) VGA Signal Connector
This input is for connecting the 15-pin D-sub VGA signal cable from computer.
(4)Knob
This knob can turn on/off built-in speaker and can adjust volume.
(5) Power Connector
This input is for connecting the power cable from the A C/DC adapter through DC 12 V
cable.
Video In (optional)
This input is for connecting the Video cable from the Video-out connection on DVD
or VCD.
S-video In
Connect the Video equipment with S- Video into this input by S-video cable.
TV system port(optional)
Using coaxial-cable with 75 ohm to obtain radio signal or TV cable signal.
If there is any technical change, we will not inform.
3. Connection with External Equipment
Note: Please be sure the AC power to your computer is turned off before connecting or
disconnecting any display peripherals. Failure to do so may cause serious personal
injury as well as permanent damage to your computer equipment.
Connect 15-pin D-sub interface cable to the computer via the video connector on the
video card, and fix it firmly with the screws provided on the plug. Plug in one end of the
audio cable to the back of the Pc. Connect the A C plug of Adapter into A C outlet.
Connectors for the signal cables and audio are located on the back of the monitor. Plug
the DC12V output of Adapter into DC12V socket. Please refer to the connector
configuration.
Page6
(Optional) Connect one end of Video Cable to LCD Monitor and other end to the DVD;
Connect one end of Audio Cable to LCD Monitor and other end to the DVD; Connect the
AC plug of Adapter into AC outlet. Plug the DC12V output of Adapter into DC12V
socket. Please refer to the connector configuration.
4. Adjust the tilt base
Adjust the panel the by adjusting the round desk for our maximum viewing comfort.
Page7
Operation
1. On Screen Display MENU & Function Table
Pressing the MENU button activates the main menu. See the following:
pressing it continuously can select the OSC options in turn.
Menu Descriptions
Auto Adjust
Automatically adjust Image Position, Horizontal Size or Fine setting Press UP or DOWN
button to adjust the settings antonatically.
Brightness
Controls the brightness of the LCD
Use + or - button to increase or decrease the setting.
Black Level
Controls the black level of the backlight.
Use "+" or "-" button to increase or decrease the setting.
CONTRAST
Control the contrast of the LCD
Use "+" or "-" button to increase or decrease the setting.
Page8
Tabla de contenidos
Otros manuales de Monitor de Winbook
