Win PL-80350 Manual de usuario
User’s Manual
WIN Enterprises, Inc. JUL., 2011
1
User’s Manual
Version 0.1
Networking Appliance
PL-80350 (Prototype): 1U Rack-Mount Intel® Atom Pineview Network
System, 6 GbE, SATA, CF, mini-PCI, PCI, and bypass
consultant[email protected]
+ 1 (978) 688-2000
User’s Manual
WIN Enterprises, Inc. JUL., 2011
2
© Copyright WIN Enterprises. All Rights Reserved
Manual Edition 1.0, Jul., 2011
This document contains proprietary information protected by copyright. All rights are reserved; no
part of this manual may be reproduced, copied, translated or transmitted in any form or by any means
without prior written permission of the manufacturer.
The content of this document is intended to be accurate and reliable; the original manufacturer assumes
no responsibility for any inaccuracies that may be contained in this manual. The original
manufacturer reserves the right to make improvements to the products described in this manual at any
time without prior notice.
Trademarks
IBM, EGA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International business Machine
Corporation
Award is a trademark ofAward Software International, Inc
Intel is a trademark of Intel
RTL is a trademark of Realtek
VIA is a trademark of VIA Technologies, Inc
Microsoft, Windows, Windows NT and MS-DOS are either trademarks or registered trademarks of
Microsoft Corporation
All other product names mentioned herein are used for identification purpose only and may be
trademarks and/or registered trademarks of their respective companies
Limitation of Liability
While reasonable efforts have been made to ensure the accuracy of this document, the manufacturer
and distributor assume no liability resulting from errors or omissions in this document, or from the use
of the information contained herein.
For more information on PL-80350 or other WIN Enterprises products, please visit our website
http://www.win-ent.com .
For technical supports or free catalog, please send your inquiry to
User’s Manual
WIN Enterprises, Inc. JUL., 2011
3
Table of Contents
Chapter 1. General Information...............................................................................4
1.1 Introduction........................................................................................................4
1.2 Specifications.....................................................................................................5
1.3 Ordering Information.........................................................................................6
1.4 Packaging...........................................................................................................6
1.5 Precautions.........................................................................................................7
1.6 System Layout ...................................................................................................8
1.7 Board Dimensions..............................................................................................9
Chapter 2. Connector/Jumper Configuration.........................................................10
2.1 Connector/Jumper Location and Definition.....................................................10
2.2 Connector and Jumper Setting.........................................................................10
2.3 CompactFlashTM Card Socket Pin Define........................................................16
Chapter 3. Optional GbE Module & Riser Card Setting .......................................16
3.1 PM-104: Ethernet module with four 10/100 switch ports ...............................16
3.2 PM-108: Ethernet module with eight 10/100 switch ports..............................16
Chapter 4. BIOS Setup...........................................................................................17
4.1 Quick Setup......................................................................................................17
4.2 Entering the CMOS Setup Program.................................................................18
4.3 Menu Options...................................................................................................20
4.4 Advanced Menu ...............................................................................................20
4.5 PCIPnP Menu...................................................................................................35
4.6 Boot Menu .......................................................................................................37
4.7 Security Menu..................................................................................................41
4.8 Chipset Menu...................................................................................................43
4.9 Exit Menu .......................................................................................................48
Chapter 5. Utility & Driver Installation.................................................................50
5.1 Operation System Supporting..........................................................................50
5.2 System Driver Installation ...............................................................................51
5.3 LAN Driver Installation...................................................................................51
Appendix A: Programming the Watchdog Timer ..................................................52
Appendix B: LAN Bypass Function......................................................................55
Appendix C: System Resources.............................................................................56
Appendix D: Cable Development Kit....................................................................60
Appendix E: Prototype PL-80350 Assembly Instructions.....................................61
User’s Manual
WIN Enterprises, Inc. JUL., 2011
4
Chapter 1. General Information
1.1 Introduction
The PL-80350 is a 1U rack-mounted hardware platform designed for network
service applications. Built with Intel Embedded IAcomponents with warranty of
longevity, the PL-80350 supports Intel® Pineview-D low-voltage processor with
Intel Pineview D525/D425 CPU and ICH8-M I/O controller.
The platform supports a high bandwidth DDR3 SODIMM slot with memory up
to 4GB. In order to provide the best network performance and best utilization,
powerful storage interfaces include one 3.5" SATA HDD and CompactFlash™.
PL-80350 affords six GbE Copper with bypass function or 5 GbE Copper with
bypass function and PCIe x1 expansion to the front bezel. The front panel also
has two USB 2.0 ports, one RJ-45 console port and LED indicators that
monitor power and storage device activities for local system management,
maintenance and diagnostics. In addition, the PL-80350 supports one Mini PCI
socket, one PCI slot, and is RoHS, FCC **PENDING** and CE **PENDING**.
User’s Manual
WIN Enterprises, Inc. JUL., 2011
5
1.2 SpecificationsCPU Intel® Atom D525, D425 Processors
Chipset Intel® Pineview + ICH8-M chipset
Processor System
BIOS AMI®BIOS
Technology Un-buffered and Non-ECC DDR3 800 MHz
memory
Memory
Capacity Up to 4GB with one SO-DIMM socket
Expansion Expansion Slots one MiniCard expansion slot (USB Only)
one PCI-E x1 connector for expansion riser card
GbE Ethernet six RJ45 GbE ports, Intel 82574L, PCI-E x1 (one
pair bypass between LAN1 and LAN2)
Ethernet
LAN bypass Two ports bypass (Optional)
SATA HDD One internal 3.5” SATA HDD bayStorage
Compact Flash
Socket
one CompactFlashTM Type II
USB two external USB2.0I/O
Serial one RJ45 Console port (COM1, RS232)
one internal 5x2 pin header (COM2)
Power Supply Watt 60W power supply, AC to DC 12V
Form Factor 1U rack-mount
LCD Module one 16x2 LCM
Keypad Four buttons keypad
LED one Bypass LED (Green)
one Power LED (Green)
one HDD LED (Yellow)
one Status LED (Green/Yellow via
programmable GPIO)
Dimensions, W x
D x H
432mm (W) x 270mm (D) x 44mm (H); 17” (W) x
8” (D) x 1.7” (H)
Operating
Temperature
0 ~ 40°C ( 32 ~ 104°F )
Storage
Temperature
-20 ~ 75°C (-4 ~ 167°F)
Mechanical and
Environment
Humidity 10 ~ 85% relative humidity, non-operating,
non-condensing
Weight 1pc/CTN, 4.5kgs, 59cm (W) x 43.2cm (D) x 16cm (H)
User’s Manual
WIN Enterprises, Inc. JUL., 2011
6
Certification CE/FCC **PENDING**
1.3 Ordering Information
We offer the following standard variations for the PL-80350 appliance.
PL-8035A 1U rack-mount Intel® D525 CPU, 5 GbE, CF, SATA, LCM, bypass, PCIe
x1 Expansion
PL-8012B 1U rack-mount Intel® D425 CPU, 5 GbE, CF, SATA, LCM, bypass, PCIe
x1 Expansion slot.
DK001 Cable development kit
CB-CO5204-00 Cross over cable
CB-EC5200-00 Ethernet cable
CB-RJDB91-00 RJ45 Console cable
CB-DB9200-01 Null modem cable
CB-IVGA01-00 VGA cable
CB-IPS200-00 KB/MS cable
CB-IUSB01-00 USB cable
1.4 Packaging
Please make sure that the following items have been included in the package
before installation.
1. PL-80350 Appliance
2. Quick Installation Guide (Optional)
3. Cables (Optional)
4. CD-ROM that contains the following folders:
(1) Manual
(2) System Driver
(3) Ethernet Driver
(4) Utility Tools
If any of the above items is missing or damaged please contact your dealer or
retailer from whom you purchased the PL-80350. Keep the box and carton if
you plan to ship or store PL-80350 in near future. After you unpack the goods,
inspect and make sure the packaging is intact. Do not plug the power adapter
to the appliance of PL-80350 if you find it appears damaged.
User’s Manual
WIN Enterprises, Inc. JUL., 2011
7
Note: Keep the PL-80350 in the original packaging until you start installation.
1.5 Precautions
Please make sure you properly ground yourself before handling the PL-80350
appliance or other system components. Electrostatic discharge can be easily
damage the PL-80350 appliance.
Do not remove the anti-static packing until you are ready to install the
PL-80350 appliance.
Ground yourself before removing any system component from its protective
anti-static packaging. To ground yourself grasp the expansion slot covers or
other unpainted parts of the computer chassis.
Avoid touching the components within it.
User’s Manual
WIN Enterprises, Inc. JUL., 2011
8
1.6 System Layout (Internal)
User’s Manual
WIN Enterprises, Inc. JUL., 2011
9
1.7 Board Dimensions
Pictures Pending
User’s Manual
WIN Enterprises, Inc. JUL., 2011
10
Chapter 2. Connector/Jumper Configuration
2.1 Connector/Jumper Location and Definition
Connectors and Jumpers:
Connector Define Connector Define
CN1 FAN Connector CN3 COM2 Pin Header
CN4 SATA Connector CN5 SATA Connector
CN6 PS2 KB/ MS Pin Header CN7 USB Pin Header
CN10 DDR3 SLOT CN11 VGA PORT
CN14 LCM KEY Pin Header CN12 FAN Connector
CN17 POWER Pin Header CN15 LCM Pin Header
CN19 LAN CONNECTOR CN18 USB CONNECTOR
CN21 LAN CONNECTOR CN20 LAN CONNECTOR
CN23 LAN CONNECTOR CN22 LAN CONNECTOR
CN25 COM1 CONNECTOR CN24 LAN CONNECTOR
PW1 HDD POWER PCIe SLOT
SW1 RESET/GPI BUTTON JP2 CLEAR CMOS
JP4 SELECT
WATCHDOG/BYPASS
CF1 CF SLOT
JP8 SELECT RESET/GPI JP5 SELECT BYPASS
2.2 Connector and Jumper Settings
CN1/CN12: CPU/System FAN
Pin Define
1 Ground
2 +12V
3 Speed Detect
Tabla de contenidos
Otros manuales de Hardware de red de Win
Manuales populares de Hardware de red de otras marcas
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manual de usuario
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manual de usuario
Yudor
Yudor YDS-16 Manual de usuario
D-Link
D-Link ShareCenter DNS-320L Manual de usuario
Samsung
Samsung ES1642dc Instrucciones de uso
Honeywell Home
Honeywell Home LTEM-PV Instrucciones de montaje
