Williams Sound CHG 404 Manual de usuario

Charging Bay

CHG 404

INSTALLATION INSTRUCTIONS

WaveCAST Receivers and Digi-Wave DLT 400 and

DLR 400 RCH can be charged in the CHG 404.

Assembling the Charger

Some minor assembly is needed before the charger can be used. The package includes the charger base, 5 plastic

dividers, a power supply, and 4 USB cables.

1. Insert the plastic dividers into the slots at the top of the charger base. The smooth, curved long edge of the

plastic divider should face outward, with the clips on the bottom long edge holding the barrier ﬁrmly in place.

2. Insert the power supply cord into the charger on the side of the device next to the USB ports.

3. Connect the power supply plug to an outlet. The unit is now powered (see “Important Note on the LED On/O

Switch” on page 1).

4. Connect the USB cables provided into the USB ports on the side of the device.

Important Note on the LED On/O Switch

The switch does NOT aect the power ﬂow to charging devices.

It is a light switch that toggles whether the blue LED lights blink during charging. Turning the switch o will disable all the

blue LED lights.

If the charger is plugged into a live outlet, your devices are charging. The LED lights do not need to be lit to indicate

charging.

USB Cables for Various Products

The WaveCAST Receivers and the Digi-Wave DLT 400 and DLR 400 RCH can be charged in the charging bay. However,

the WaveCAST Receiver uses a USB micro-B cable to charge, and Digi-Wave products use a USB-C cable to charge.

Both cable types can be used with this charger.

Additional cables can be ordered from Williams AV, or a generic cable of the correct type can be purchased. The Williams

AV part numbers are:

• WCA 144 for the USB-C cable used by Digi-Wave devices. These cables come with the CHG 404 DW.

• WCA 145 for the micro-B USB cable used by the WaveCAST Receiver. These cables come with the CHG 404 WF.

MAN 258A

Charging Devices

To charge the devices:

1. Plug the correct USB cable into the bottom of your device. See “USB Cables for Various Products” on page 1.

2. Make sure the cable is also plugged into the base of the charger.

3. Set the device being charged into one of the slots on the charger. The slots only hold the device in place, and require

no direct connection to the device.

4. If the LED lights are enabled, they will blink as the device charges. See “Important Note on the LED On/O Switch” on

page 1.

LED Lights

When turned on, the LED lights will indicate charging. However, the LED lights will not blink at a consistent pace, and may

even turn o for longer than expected. This behavior is normal, and the charger is working correctly.

Recycling Instructions

Help Williams AV protect the environment! Please take the time to dispose of your equipment properly.

Please Recycle

Please do NOT dispose of your equipment in the household trash. Please take the equipment to a electronics

recycling center for proper disposal.

Warranty

The CHG 404 charger is covered by a 1-Year factory warranty.

Any included cables or other accessories are covered for 90 days.

If you experience diculty with your charger, call toll-free for customer assistance:

1-800-843-3544 (U.S.A.) or

1-952-943-2252 (Outside the U.S.A.)

If it is necessary to return the charger for service, your customer service representative will give you a Return Authorization

Number (RA) and shipping instructions.

CHG 404 - Charging Bay

info@williamsav.com / www.williamsav.com

800-843-3544 / INTL: +1-952-943-2252

Tabla de contenidos

Otros manuales de Cargador de baterías de Williams Sound

Williams Sound

Williams Sound CHG 412 Manual de usuario

Williams Sound

Williams Sound CHG 200A Manual de usuario

Williams Sound

Williams Sound CHG 3512 Guía

Williams Sound

Williams Sound CHG 518 Manual de usuario

Williams Sound

Williams Sound CHG 520 Manual de usuario

Williams Sound

Williams Sound CHG 3512 Manual de usuario

Williams Sound

Williams Sound CHG 863-35 Manual de usuario

Williams Sound

Williams Sound CHG 3512 Instrucciones de montaje

Williams Sound

Williams Sound CHG 238 Instrucciones de montaje

Williams Sound

Williams Sound CHG 518 Manual de usuario

Williams Sound

Williams Sound CHG 238 Manual de usuario

Williams Sound

Williams Sound BAT KT7 Manual de usuario

Williams Sound

Williams Sound CHG 516 Manual de usuario

Williams Sound

Williams Sound CHG 1012 Guía

Williams Sound

Williams Sound Multiple Charger CHG 1269A Manual de usuario

Williams Sound

Williams Sound BAT KT7 Manual de usuario

Manuales populares de Cargador de baterías de otras marcas

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Manual de usuario

Enelion

Enelion Vertica Manual de usuario

RCA

RCA CHU6 Manual de usuario

ANSMANN

ANSMANN ALCT 6/24-10 Manual de usuario

Hitachi

Hitachi UC 18YRSL Guía de solución de problemas

Olympus

Olympus B-20 LPC Manual de usuario

Exibel

Exibel ZH1708143 Manual de usuario

Lenmar

Lenmar Mach 1 Manual de usuario

CTEK

CTEK MXS 5.0 Manual de usuario

ABB

ABB HT842379 Manual de usuario

Nitecore

Nitecore Superb Charger SC4 Manual de usuario

Renogy

Renogy RBC2125DS-21W Manual de usuario

Braun

Braun BWC02M Manual de usuario

CTEK

CTEK MXS 3.6 Manual de usuario

Black & Decker

Black & Decker BDV090 Manual de usuario

Trinity

Trinity DPD Manual de usuario

Hulkman

Hulkman Sigma 1 Manual de usuario

IKEA

IKEA koppla Manual de usuario