WiDMX LC-512 Series Manual de usuario

Wireless DMX Transceiver
LC-512 Series User Manual
Version 2.0
www.widmx.com

Thank you for choosing WIDMX LC-512 Series Wireless DMX
Transceiver. WIDMX LC-512 Series is unique in its use of
advance radio technologies that are also used in military
communication and mobile phones. Its user-friendly operation
that simplifies all the complex communication protocols makes
it possible for the users to plug and play.
WIDMX LC-512 Series uses 2.4GHz global open ISM band
with license-free use. The Gaussian Frequency Shift Keying
(GFSK) modulation, Frequency Hopping Spread Spectrum
(FHSS) with 79 channels interference-free operation. WIDMX
LC-512 Series is continually considered as a reliable wireless
DMX product for lighting installations over large distances and
in any environment.
There are no upgrading troubles. Because ours is now
compatible with the world's leading wireless communication
protocols like the Sweden’s protocol or the GZ protocols.
Complete instructions and product features, please read this
manual or visit our website at www.widmx.com .

Content
SAFETY INFORMATION.............................................2
STATEMENT..................................................................3
1 INTRODUCTION........................................................4
1.1 FEATURES..............................................................4
1.2 SPECIFICATIONS.....................................................5
1.3 PACKING LIS..........................................................5
1.4 INTERFACE.............................................................6
2 OPERATING GUIDE.................................................7
2.1 OPERATING MODE..................................................7
2.2 DESCRIPTION OF STATUS INDICATOR .....................9
2.3 SELECT WIRELESS GROUP...................................11
2.4 RESTORE FACTORY SETTINGS...............................13
2.5 CONNECTION AND DELETE CONNECTION ............13
3 APPLICATIONS.......................................................15
3.1 ONE TRANSMITTER TO ONE RECEIVER .................15
3.2 ONE TRANSMITTER TO MANY RECEIVERS.............16
3.3 PARALLEL TRANSMISSION ...................................17
3.4 REPEATER OR AMPLIFIER.....................................17
4 MAINTENANCE.......................................................18

Safety Information
Please keep the product far away from the heat. It
should be away from the heater, radiator or any other
heat source. Heat will damage and break the product,
even worse it may start a fire.
Please shutdown the product where there are slogans
like “Explosion Zone”, “May Burst Area” and “Turn off
the wireless transceiver” or somewhere such as
Hospital, Gas Station and Airport.
It may bring trouble for some medical electronic
equipment like hearing-aid and cardiac pacemaker
and so on. Please follow the warning notes and safety
instructions.
Please use the attached power adapter. It might
damage the device if using unapproved power
adapter.

Statement
We will keep improving and developing our products.
We reserve the right to modify and to improve the
described item in this document without notice in
advance.
Unless otherwise provided by applicable laws, we do
not make any type or implied warranties to the
accuracy, reliability and content of it, including but not
limited to the warranties of merchantability and the
purposes of specific application.
In any case, we do not take responsibility on the loss
of data, property and revenue, or any special,
incidental, consequential or indirect damages, whether
the loss caused by any reason.
The availability of particular products may vary by
region. Please contact with your local dealer.

www.widmx.com LC-512 Series User Manual
4
1 Introduction
1.1 Features
WIDMX LC-512 Series is unique in its use of advance radio
technologies that are also used in military communication
and mobile phones. Its user-friendly operation that simplifies
all the complex communication protocols makes it possible
for the users to plug and play.
2.4GHz ISM Band, license-free worldwide
FHSS with 79 Channels, interference-free operation
32-bit ARM processor, DMA transfer without delay
Standard DMX512 3-pin XLR, 5-pin XLR, transceiver
Built-in Wireless Solution compatibility mode
Group Mode, easy plug-and-play operation; Pairing
Mode, supports more transmitter universes

www.widmx.com LC-512 Series User Manual
5
1.2 Specifications
Band: 2.402GHz –2.480GHz, ISM, 79 channels
Spread spectrum: FHSS, 1100 hops / sec
Modulation: GFSK
Maximum Transmit Power: 23dBm
Receiver Sensitivity: -94dBm
Power: DC 5V ±10%
Size:212 x 18 x 18 mm
1.3 Packing Lis
Delivery includes:
1) Wireless DMX Transceiver 1pcs
2) Power Adapter 1pcs
3) User Manual 1pcs

www.widmx.com LC-512 Series User Manual
6
1.4 Interface
1, DMX512 3-pin or 5-pin male or female XLR
2, External power supply input
3, Status indicator
4, Button
5, Antenna

www.widmx.com LC-512 Series User Manual
7
2 Operating Guide
2.1 Operating mode
Wireless transceiver has two operating modes: set-up
mode and use mode
1, Set-up mode: Press and hold the button before you
power up. When you see status indicator turns into the white
light, release the button to enter the Set-up mode. In this
mode you can select different transmission protocols. Each
time you press the button, you would see the status indicator
changes in follow order: red, green, blue and yellow. In the
Set-up mode, different colors mean different communication
protocols which are listed on the following table. Choose one
of the protocols and press and hold the button (> 1S), when
you see the white light, release it to enter the use mode.

www.widmx.com LC-512 Series User Manual
8
Note: The wireless transceiver will remember the chosen
protocol even after you disconnecting the power supply.
There is no need for repeated setting.
Color
Protocol
Red
WIDMX
Green
W-DMX Receive
Blue
W-DMX G3 Transmit
Yellow
GZ Protocol
Purple
W-DMX G4 Transmit
2、Use mode:
a) Powered up and enter the use mode;
b) If it is in set up mode, press and hold the button (> 1S)
until you see the white light, then release it to enter the use
mode.
Tabla de contenidos

















