Whites Prizm 5G Manual de usuario

White’s Electronics, Inc.

1011 Pleasant Valley Road

Sweet Home, Oregon 97386

™

Prizm 5G

User Guide

Assembly

1) Remove all parts from shipping carton (see cover).

2) Use nonmetallic washers (between round search coil and clevis

ber rod) and ber bolt and thumbnut to secure search coil to ber

rod.

3) Insert ber rod into curved rod, line up buttons into one of

adjustment holes.

4) Unravel search coil cable and wind around rods (rst revolu-

tion over top of rod). Plug search coil cable into control box, screw

“nger-tight” to secure.

5) Grip by handle, with arm in elbow cup and sweep search coil

over oor. If necessary, for comfort, compress buttons and re-

position ber rod. If necessary, Elbow Cup is also adjustable for

comfort.

1) Open battery door by pressing elongated button on back of display

and ipping open door. Install two nine volt alkaline batteries (according

to +/- position shown inside door). Close door.

2) Press ON/OFF button. Sweep search coil over ground evenly (near

to or touching ground surface) keeping close to the ground throughout

each sweep and overlapping each pass as if mopping a oor.

3) Solid repeatable beeps and repeatable display signies a “hit”.

Press P/P button and “X” areas to pinpoint exactly where to dig. Press

P/P again to continue searching.

4) Broken or inconsistent beeps and display indicates undesirable

metals.

seArching

1) ON/OFF turns the Power ON and OFF. Low Battery indication is au-

tomatically shown on the display. Remove batteries for storage beyond

two weeks.

2) SENS (sensitivity) adjust the responsiveness to metals, ground, and

external electrical interference. Level shown on the display. Use the

DisplAy inDicAtions

•Typical MeTal

TargeT caTegories

•currenT

MeTal indicaTion

•disc/rejecTion

•p/p (pinpoinT)

all MeTal Mode

•currenT MeTal’s depTh

•low BaTTery indicaTion

•currenT sensiTiviTy

seTTing

•Tone idenTificaTion

acTivaTed

•preseT ground Balance

wiTh opTional Manual override

increases depTh in Mineralized ground

controls

highest level that behaves predictably, lower levels for areas unstable

(falsely signals without the presence of metal).

3) P/P activates pinpoint mode for better item location. Press a second

time prior to continued searching.

4) DISC (discrimination) selects the acceptance or rejection (regarding

audio beep) of each category on the display from IRON to C1 (zinc cent).

For more jewelry, except for iron, accept as much as you can endure.

5) The depth of coin-sized metal is automatically indicated on the lower

left-hand portion of the display.

6) Smart Notch. Press Smart Notch. With Disc control set at FOIL or be-

low, pull tabs are eliminated. With Disc control at nickels or above, nickels

are accepted. Smart Notch either eliminates TAB, or accepts nickels.

7) MultiTone (tone identication). Tap Multi Tone. Each display indication

segment produces a different tone, eight different tones - one for each

segment. The further to the left the target segment, the higher the tone.

Press and hold Multi Tone a few seconds (instead of tapping) to enable

three tone Tone ID.

8) VCO Pinpointing. Press Pinpiont. Press Multi Tone. As the loop is

“x-ed” over the target to pinpoint, the tone increases with target intensity.

Highest tone indicates target center.

9) Ground balance control is located on the left side of the display hous-

ing. Fully counterclockwise is preset; best for low or moderate mineralized

grounds.

FOR MORE MINERALIZED GROUNDS -

a) Press Pinpoint. Abruptly lift and lower the search coil from the ground.

b) If a dramatic change in hum is heard, continue lifting and lowering the

search coil from the ground while slowly turning the ground balance control

clockwise.

c) The control position that provides little or no change in the hum, when

lifting and lowering the search coil, balances/rejects the ground and will

penetrate deeper than Preset.

d) Press Pinpoint to return to the normal search mode.

WArrAnty

If within two years (24 months) from the original date of purchase, your White’s detector fails

due to defects in either material or workmanship, White’s will repair or replace at its option,

all necessary parts without charge for parts or labor.

Simply return the complete detector to the Dealer where you purchased it, or to your near-

est Authorized Service Center. The unit must be accompanied by a detailed explanation of

the symptoms of the failure. You must provide proof of date-of-purchase before the unit is

serviced. (http://whiteselectronics.com/info/service,html)

This is a transferable manufacturer warranty, which covers the instrument two years from the

original purchase date, regardless of the owner.

Items excluded from the warranty are batteries, accessories that are not standard equipment,

shipping/handling costs outside the continental USA, Special Delivery costs (Air Freight,

Next Day, 2nd Day, Packaging Services, etc.) and all shipping/handling costs inside the conti-

nental USA 90 days after purchase.

White’s registers your purchase only if the Sales Registration Card is lled out and re-

turned to the factory address by your dealer soon after original purchase. The purpose of

recording this information is to keep you up-to-date regarding White’s ongoing research &

development.

The warranty does not cover damage caused by accident, misuse, neglect, alterations,

modications, unauthorized service, or prolonged exposure to corrosive compounds, includ-

ing salt.

Duration of any implied warranty (e.g., merchantability and tness for a particular purpose)

shall not be longer than the stated warranty. Neither the manufacturer or the retailer shall be

liable for any incidental or consequential damages. Some states however, do not allow the

limitation on the length of implied warranties, or the exclusion of incidental or consequential

damages. Therefore, the above limitations may not apply to you.

In addition, the stated warranty gives you specic legal rights, and you may have other rights

which vary from state to state.

The foregoing is the only warranty provided by White’s as the manufacturer of your metal

detector. Any “extended warranty” period beyond two years, which may be provided by a

Dealer or other third party on your detector, may be without White’s authority, involvement

and consent, and might not be honored by White’s Electronics, Inc.

P/N 621-0524 Printed in USA 2/10

Tabla de contenidos

Otros manuales de Detector de metales de Whites

Whites

Whites Treasuremaster G.E.B. Especificaciones

Whites

Whites Liberty Di Manual de usuario

Whites

Whites Liberty II Manual de usuario

Whites

Whites Treasuremaster PI 1000 Manual de usuario

Whites

Whites TM 808 Manual de usuario

Whites

Whites 63T Especificaciones

Whites

Whites Coinmaster 400 Series 2 Especificaciones

Whites

Whites GOLDMASTER Series Manual de usuario

Whites

Whites Beachcomber 5 Especificaciones

Whites

Whites Treasuremaster PI 3000 Manual de usuario

Whites

Whites DXF Manual de usuario

Whites

Whites Conquistador 100 Manual de usuario

Whites

Whites Goldmaster 64TR Manual de usuario

Whites

Whites Little Treasure Finder I Manual de usuario

Whites

Whites Coinmaster GT Manual de usuario

Whites

Whites Goldmaster S-66 Manual de usuario

Whites

Whites MX 7 Manual de usuario

Whites

Whites Coinmaster 6000/Di Series 2 Especificaciones

Whites

Whites Comet 50 Especificaciones

Whites

Whites DFX Manual de usuario

Whites

Whites Nuggetmaster Manual de usuario

Whites

Whites Goldmaster 24k Manual de usuario

Whites

Whites Beachcomber TR Manual de usuario

Whites

Whites 5900/DI PRO SL Manual de usuario

Manuales populares de Detector de metales de otras marcas

Garrett

Garrett MAGNASCANNER CS 5000 Manual de usuario

Valex

Valex 1800200 Manual de usuario

Gauss

Gauss MIL MD Manual de usuario

Velleman

Velleman CS130 Manual de usuario

Sears

Sears 321.596370 Manual de usuario

Eriez

Eriez X8 Manual de usuario

Steinberg Systems

Steinberg Systems SBS-MD-22 Manual de usuario

Zircon

Zircon MetalliScanner m60c Manual de usuario

nalanda

nalanda MD027 Manual de usuario

REV Ritter

REV Ritter CB-7005 Manual de usuario

Minelab

Minelab F1A4 Manual de usuario

Fisher Research Labs

Fisher Research Labs F70 Manual de usuario

Steinberg Systems

Steinberg Systems SBS-MD-12 Manual de usuario

GOLDEN MASK

GOLDEN MASK 5 Manual de usuario

Grizzly

Grizzly YM 203 Manual de usuario

Fisher Research Labs

Fisher Research Labs 1280-X Aquanaut Manual de usuario

Treasure Cove

Treasure Cove Vibra-Probe 560 Manual de usuario

Accurate Locators

Accurate Locators XL16 IMAGER Manual de usuario