Whacker Verve 2.0 Manual de instrucciones

Verve2.0

Installation&UserManual

Contents

Chapter1Safety&PrecautionsforInstallers&Users..............................................................................5

SafetyMessagestoInstallers&UsersBeforeInstallation.................................................................5

SafetyMessagestoInstallers&UsersDuringInstallation................................................................6

Chapter2IntroductiontothePoliceLightzLinearSlimProSeries...........................................................7

Features&Options...................................................................................................................7

TechnicalSpecifications.............................................................................................................7

Chapter3InstallingthePoliceLightzLinearSlimProSeries...................................................................8

InstallingtheMountingFeet.......................................................................................................8

InstallingtheLightbarandMountingBrackets...............................................................................9

Chapter4WiringthePoliceLightzLinearSlimProSeries.....................................................................10

RoutingtheWireHarnessestotheCabinandPowerSource............................................................10

MountingandConnectingtheControlPanel/Box.........................................................................10

HardwiringtheLightbartoNonFactoryControlPanel/Box............................................................11

Customer&TechnicalSupportInformation........................................................................................12

CHAPTER1

SafetyandPrecautionsforInstallers&Users

Forthesafetyofinstallersanduserspleasereadthismanualthoroughlybeforeinstalling,operatingandservicing

theWhackerTechnologiesVerve2.0.Thesafetyguidelinesandinstructionsthroughouttheusermanualare

reminderstoexercisecautionandcareatalltime.Pleasemakesuretokeepthisusermanualathandforquick

reference.Todownloadcopiesorupdatesofthismanualpleasevisitwww.whackerusa.com.Forquestionsrelatedto

thisorotherWhackerTechnologiesproductspleasecontactusat[email protected]orcallthe

WhackerTechnologiesTechnicalDepartmentat8882504144.

Note:Thisequipmentisintendedforusebyauthorizedpersonnelonly.Itistheresponsibilityoftheowner/operator

toobeyalllawsregardingemergencysafetyequipment.WhackerTechnologies,Incandanyofitssubsidiariesare

notresponsibleorliableforanylossresultingfromimproperorunauthorizeduseofthisequipment.

TheproperuseandinstallationofallWhackerTechnologiesproductsisimportanttoguaranteethatyougetfull

usefromsafetyproduct.Itisimportantthattheinstalleranduserreadandfollowallinstructionsshippedwiththis

product.

BeforeInstallationand/orService

● Topreventdamagetoproducts,pleaseensurethatallequipmentoperatesproperlybeforeinstallation.Also

carefullyplanwheretomountandwiretheequipment.

● Verifythatthelightbarandmountinghardwarefitthevehicle(Note:Universalbracketsmaynotfitthe

vehicleperfectly).

● Determinethelocationtomounttheequipment,locatetherouteforwiringtheequipmentpowercable,

locatetherouteforthefunctioncable.

● TheLEDsandlightingcomponentsofthisequipmentincludingbutnotlimitedtotheLEDs,strobetubes,

lensesandhousinggethotduringoperations.Pleaseallowallcomponentstocoolbeforeinstallingand/or

servicingequipment.

LED&LightWarning

● Thisequipmentproducesbrightlightsthatcanbehazardoustoyoureyesightwhenviewedwithinclose

proximityand/orforextendedperiodsoftime.Donotstaredirectlyintothisemergencylightingequipment

withincloseproximityand/orforextendedperiodsoftimeaspermanentdamagetoyoureyesightmayoccur.

● Donotinstallthisoranyemergencylightingequipmentinanareathatwouldblockand/orinterferewiththe

operator’sdrivingability.Careshouldbetakentomakesurethatcomponentsofthevehiclearenot

blockingthewarningequipmenttoensuremaximumvisibilityfromalldirections.

Electrical&WiringWarning

● Publicsafetyandwarningequipmentrequirehighelectricalvoltages.Ensurethatallwiringandconnections

areproperlyprotected/insulated.

● Goodelectricalconnectionstochassispositiveandgroundarenecessaryforoptimumefficiency.Separate

positiveandgroundconnectionsmustbemade.Ensurethatallwiresareratedcorrectlytohandlethe

amperagerequirementsoftherequirement.

DuringInstallationand/orService

● Ensurethatallequipmentandwiringdonotinterferewithanyairbagequipmentoritsabilitytofunction

properly.

● Separateallequipmentfromtwowayradioequipmenteveniftheequipmentisequippedwiththeproper

insulation.Toavoidinterferencewithsomeequipmentmakesurethatthetwowayradioantennasarea

minimumof50cmawayfromwarningequipment.

● Donotconnecttheequipmenttothebatteryuntilallotherconnectionshavebeenmadeandtestedto

ensurenoshortsinthesystemexist.

● Ifmountingtheequipmentrequiresthattheinstallerdrillsholes,theinstallermustmakesurethatno

vehiclescomponentscanbedamagedduringthedrillingprocess.Topreventelectricalshortsordamageto

anyoftheequipmentcomponentsensurethatalldrilledholeshavegrommetsinstalled.Alsoensurethatall

mountingscrewsandcomponentsdonotdamageanyofthewires.

● Duringthedrillingprocessensurethatmetalshavingdonotgetinsidetheequipment.Metalshavingscan

damagetheinternalwiringandpartsoftheequipment.

● Locatethecontrolequipmentsothattheusercansafelyoperatethevehicleandtheemergencyequipment

underalldrivingconditions.

AfterInstallationand/orService

●Testallequipmenttoensurethatallfunctionsworkproperly.Checktomakesurethatduringtheinstallation

oftheequipmentnosystemsorpartsofthevehicleweredamagedoraltered.

Failuretofollowallsafetywarningsandinstructionslocatedinthismanualmayresultindamagetotheequipment

and/orvehicle,seriousinjuryordeath.Pleaseretainthisusermanualforfuturereference.

CHAPTER2

IntroductiontotheWhackerVerve2.0LEDFullSizeLightBar

TheWhackerVerve2.0isanexterior,roofmounted360degreewarninglightsystemthatcanbeutilizedby

professionalsinawiderangeofindustries.TheVerve2.0iscurrentlyavailableina50”modelwithuniversalor

vehiclespecificmountingequipment.

Features&Options

TheWhackerVerve2.0LEDLightbarcomesstandardwith33selfcontainedwarningpatterns.TheVervecontainsa

totalof22warningmodulesthatincludestwotakedownsandtwoalleys.Thelightbarcomesinstandardcolor

configurationsofamber,red,blueorred/bluebutcolorscanalsobecustomizedpermodule.

Features:

● Coloroptions:Amber,Red,Blue,Red/Blueorcustomcolorconfiguration

● 120GenerationIIILEDs

● 33FlashPatternsincludingsteadyburn

● Integratedarrowstick

TechnicalSpecifications:

● Dimensions:50”Lx11.5”Wx4.375”H

● Weight:35lb

● WireHarness:19.5’

● UniversalMountingEquipment(Vehiclespecificmountinghardwareisavailableseparately).

CHAPTER3

InstallingtheWhackerVerve2.0

AfterunpackingtheWhackerVerve2.0,carefullyinspecttheunitfordamagethatmayhaveoccurredduringtransit.

Ifanydamagehasbeenfoundreportthedamagetothecarrierandkeeptheoriginalshippingcartonuntiltheclaim

hasbeenresolvedanddonotinstalltheproduct.Contactyourdealerordistributortofindouthowtoresolvethe

issuebeyondwhattheshippingcarrierhandles.Ifyouaremissingparts,contactcustomerserviceat8882504144.

Testtheunitbeforeinstallation.Totesttheunittouchtheblackwiretothegroundandtheotherwirestothe+12

voltDContheautomotivebattery.Ifanyproblemsoccuratthispointdonotinstallthelightbarandcontactthe

factoryat8882504144.

Onlyusethemountingequipmentandscrewssuppliedwiththeunit.Installingthisunitwithnonfactoryequipment

ormodifyingthemountingequipmentmayresultindamagetotheunitandthelossofwarrantycoverage.

IMPORTANT:Planallcableroutingbeforebeginningtheinstallationofthisunit.Ensurethatthelightsystem

controlsforthisunitarelocatedinaplacewheretheydonotinterferewithanyvehiclesafetyequipmentandwhere

thecontrolcanbesafelyoperatedbytheenduserunderalldrivingconditions.Failuretodosocanresultindriver

errorswhileoperatingthevehicle.

PreparingtoInstallMountingFeet

Useproperliftingtechniqueswhenremovingorinstallingthisproduct.Improperliftingtechniquesandavoiding

thiswarningcouldresultinpersonalinjury.

1.Placethelightbarwiththesmoothsurface(top)ofthelightbarfacinguponsoftragsorcardboardmaterialto

avoidscratchingordentingofthealuminumhousing.

2.Removeeachendcapbyremovingthefourscrewsoneachendcap.Therearetwoscrewsonthetopandtwo

screwsonthebottomofeachendcap.

3.Afterinstallingthemountingfeetpositiontheendcapsbackintheappropriatelocationandattachtothebodyof

thebarwiththefourscrews.

InstallingtheMountingFeet

1.Placethelightbarupsidedownonsoftragsorcardboardmaterialtoavoidscratchingordentingofthealuminum

housing.

2.Takethemountingfootandinsertfourbolts(eighttotal)throughthefouraccessholesonthemountingfoot

surfaceplate.

3.Positionthefourboltsattheopeningtothemountingtrackandslidethemountingfootintothedesiredlocation

onthetrack.

4.Installfourflatwashers,lockwasherandnutsonthebolts,leavingtheboltsjustlooseenoughtorepositionthe

mountingfootifnecessary.Donottightenthenutsyet.

5.Repeatthisprocessforthesecondmountingfoot.

InstallingtheLightbarontheVehicleRoof

1.Placethelightbaronthevehicleroofinthedesiredlocation.Thelightbarisusuallycenteredonthedoorcenter

post(Bpillar).

2.Adjustbothmountingfeetinoroutasnecessaryuntilthefootpadsrestneartheedgeoftherooforgutterwhere

theroofisthemostrigid.Makesurethatthelightbarandthemountingfeetarecenteredlefttorightonthevehicle.

3.Checkthatthelightbarislevelbyshiftingthelightbarslightlyforwardorback.

4.Carefullyremovethelightbarfromthevehicleroofandplaceitupsidedownonsoftragsorcardboardmaterialto

avoidscratchingordentingtothealuminumhousing.Ensurethatthemountingfeetdonotshifttheirposition.

5.Tightenthenutsthatsecurethemountingfeetinplacetothelightbar.

InstallingtheUniversalorVehicleSpecificMountingBracket

1.Placethelightbaronthevehicleroof.TheassemblyisusuallycenteredovertheBpillar.

2.Determinewherethemountingbracketwillattachtothevehicle.

3.Placethemountingbracketontheroofsheetmetal.

4.Placethemountingboltfromthemountingfeetthroughthedesiredpositiononthemountingbracketandtighten

inplacewiththeflatwasherandnut.

5.Securethemountingbrackettothevehicleusinga5/16”18boltoftheappropriatelength.

6.Repeatthisprocesstoinstallthesecondvehiclemountingbracket.

IMPORTANT:Frequentlyinspectthelightbar,mountingfeetandmountingbracketstoensurethatallfastenersand

bracketsaretight.

CHAPTER4

WiringtheWhackerVerve2.0

Beforewiringthelightbarinthevehicle,ensurethatthelightbarisproperlyinstalledandsecuredtothevehiclewith

thefactoryincludedmountingkit.

Thislightbariscompletelywiredatthefactoryanddoesnotneedanyadditionalinternalwiring.Moststandard

functionsofthislightbarcanbecontrolledbythefactoryincludedcontrolpanel/box.

AIRBAGDEPLOYMENT

Donotinstallequipmentorrouteanywiringofthisunitwhereitmayinterferewiththedeploymentofthevehicle

installedairbagorothersafetyequipment.

Failuretoobservethiswarningwithreducetheeffectivenessoroperationoftheairbagandanyothervehiclesafety

equipmentandcancauseseriousinjuryordeath.

BATTERYWARNING

Toavoidabatteryexplosion,disconnectthenegativecablefirstandreconnectitlastwheninstallingormaintaining

theequipment.Avoidanelectricalinterferenceorsparkswhenconnectingtheequipmentorworkingnearthe

battery.

1.Ensurethatalllinesareproperlyfusedwith20ampfuse(ifrequired).Fromthelightbar,routetheusercontrolwire

harnessintothevehiclescabneartheeventuallocationofthefactoryincludedcontrolpanel/box.

2.Routethepowerwireharnesstothevehicle’sbatteryandconnectthered+12positivewireandblacknegative

wiretothebattery.

MountingandConnectingtheControlPanel/Box

Lightcontrolsystemsincludingallcontrolpanels/boxesmustbelocatedinthevehiclesotheycanbeoperated

safelyunderalldrivingconditions.Lightcontrolsystemsmustbepositionedsoasnottointerferewithallvehicle

safetyequipment.

1.Preparethemountingareabyensuringthatthequickconnectwireharnessfromthecontrolpanel/boxreachedthe

quickconnectwireharnessfromthelightbar.Ensurethatthemountingareaislargeenoughtofitthecontrol

panel/box.Thefactoryincludedcontrolpanelboxdimensionsare:6⅛”x5”x2⅛”notincludingthemounting

bracket.

2.Positionthefactoryincludedcontrolpanel/boxmountingbracketinthedesiredlocationandmarkthelocationin

thevehiclefordrillingtwoholes.Oncemarkedandtheholesaredrilledinstallthemountingbracketwiththeincluded

screws.

Tabla de contenidos

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario