Westcott 8001 Manual
Accessories
Page 1 of 1
Setup Instructions
Universal Clamp
Style Series: 8001
Description
A quick solution when an umbrella receptacle is not available.
Product Contains
[1] Hose Clamp
[1] Black Block with thumb screw
INSTRUCTIONS
NOTE: When attaching to a portable Strobe,
follow the above instructions for assembly and
choose the required Hose Clamp size for your
Strobe.
1. The hose clamp is to slide completely
around the front section of the lighting unit.
2. When in place, insert the Bracket under the
Hose Clamp (In the Harness Position)
3. Use a screwdriver to then tighten. Finally,
insert umbrella shaft through mount until
desired position is established, then tighten
Set Screw Knob.
NOTE: The Bracket Hose Clamp comes in a
variety of sizes up to 8” which is adaptable to
most shapes and can be purchased at your local
automotive supply or hardware stores. (Ideal
or Dixon clamps work best)
Tabla de contenidos
Otros manuales de Accesorios para cámaras de Westcott
Westcott
Westcott FJ-X2m Manual de usuario
Westcott
Westcott Mini Apollo 2218 Manual
Westcott
Westcott FJ-X3 Manual de usuario
Westcott
Westcott 1862 Manual
Westcott
Westcott Micro Apollo 2200 Manual
Westcott
Westcott 1875 Manual
Westcott
Westcott SOLIX Manual de usuario
Westcott
Westcott 1876 Manual
Westcott
Westcott 1815 Manual
Westcott
Westcott 1822 Manual
Westcott
Westcott 1090 Manual
Westcott
Westcott 1864 Manual
Westcott
Westcott 1821 Manual
Westcott
Westcott FJ80-SE Series Manual de usuario
Westcott
Westcott 1848 Manual
Westcott
Westcott 1860 Manual
Westcott
Westcott 1819 Manual
Westcott
Westcott 1865 Manual
Westcott
Westcott PokerLite 7051 Manual
Westcott
Westcott 1851 Manual
