Weslo WLEL31216.2 Manual de usuario
USER’S MANUAL
weslo.com
Serial
Number
Decal
Model No. WLEL31216.2
Serial No.
Write the serial number in the space
above for reference.
CAUTION
Read all precautions and
instructions in this manual before
using this equipment. Keep this
manual for future reference.
To register your product and
activate your warranty today,
go to my.weslo.com.
For service at any time, go to
wesloservice.com.
Or call 1-866-699-3756
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
ACTIVATE YOUR
WARRANTY
CUSTOMER CARE
2
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the
warning decal(s). If a decal is missing
or illegible, see the front cover of this
manual and request a free replace-
ment decal. Apply the decal in the
location shown. Note: The decal(s) may
not be shown at actual size.
WESLO is a registered trademark of ICON Health & Fitness, Inc.
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS..................................................................3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
HOW TO USE THE STEPPER CLIMBER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
MAINTENANCE AND TROUBLESHOOTING.....................................................18
EXERCISE GUIDELINES ....................................................................19
PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
ORDERING REPLACEMENT PARTS .................................................. Back Cover
LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
TABLE OF CONTENTS
3
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your stepper climber before using your stepper
climber. ICON assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.
1. It is the responsibility of the owner to ensure
that all users of the stepper climber are
adequately informed of all precautions.
2. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or per-
sons with pre-existing health problems.
3. The stepper climber is not intended for use
by persons with reduced physical, sensory,
or mental capabilities or lack of experience
and knowledge, unless they are given super-
vision or instruction about use of the stepper
climber by someone responsible for their
safety.
4. Use the stepper climber only as described in
this manual.
5. The stepper climber is intended for home
use only. Do not use the stepper climber in a
commercial, rental, or institutional setting.
6. Keep the stepper climber indoors, away from
moisture and dust. Do not put the stepper
climber in a garage or covered patio, or near
water.
7. Place the stepper climber on a level surface,
with a mat beneath it to protect the floor
or carpet. Make sure that there is at least
2 ft. (0.6 m) of clearance around the stepper
climber.
8. Inspect and properly tighten all parts each
time the stepper climber is used. Replace
any worn parts immediately.
9. Keep children under age 13 and pets away
from the stepper climber at all times.
10. The resistance cylinders become hot during
use. Allow the resistance cylinders to cool
before touching them.
11. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the stepper climber. Always wear
athletic shoes for foot protection.
12. The stepper climber should not be used
by persons weighing more than 250 lbs.
(113 kg).
13. Be careful when mounting and dismounting
the stepper climber.
14. Always keep your back straight while using
the stepper climber; do not arch your back.
15. Over exercising may result in serious injury
or death. If you feel faint, if you become short
of breath, or if you experience pain while
exercising, stop immediately and cool down.
4
STANDARD SERVICE PLANS
5
BEFORE YOU BEGIN
Handlebar
Adjustment Pin
Resistance Knob
Resistance Cylinder
Adjustment Collar
Pedal
Leveling Foot
Console
Thank you for selecting the new WESLO®STEP FIT
CLIMBER stepper climber. Stepping is one of the
most effective exercises for increasing cardiovascular
fitness, building endurance, and toning the entire body.
The STEP FIT CLIMBER stepper climber provides a
selection of features designed to make your workouts
at home more effective and enjoyable.
For your benefit, read this manual carefully before
you use the stepper climber. If you have questions
after reading this manual, please see the front cover
of this manual. To help us assist you, note the product
model number and serial number before contacting us.
The model number and the location of the serial num-
ber decal are shown on the front cover of this manual.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
Height: 7 ft. 7 in. (231 cm)
Length: 3 ft. 2 in. (97 cm)
Width: 2 ft. 1 in. (64 cm)
Grip
6
M8 Locknut
(69)–3
M10 Locknut
(74)–1
M8 x 16mm
Screw (78)–2
M4 x 16mm
Screw (82)–6
M10 x 20mm
Screw (77)–4
M10 x 73mm Bolt (75)–1
M8 x 40mm Bolt (80)–2
M8 x 35mm Bolt (68)–1 M8 x 68mm Screw (73)–4
M6 x 14mm
Screw (81)–8
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
7
• To hire an authorized service technician to
assemble this product, call 1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 6.
• In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one adjustable wrench
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
ASSEMBLY
1
1. Go to my.weslo.com on your computer and
register your product.
• documents your ownership
• activates your warranty
• ensures priority customer support if assistance
is ever needed
Note: If you do not have internet access, call
Customer Care (see the front cover of this
manual) and register your product.
8
2. Pivot the Base Leg (10) away from the Base (6)
and orient the parts as shown.
Secure the Base Leg (10) with an M10 x 73mm
Bolt (75) and an M10 Locknut (74); do not fully
tighten the Locknut yet.
74
75
6
6
10
11
10
69
2
3. Pull the Base Brace (11) away from the Base
(6) and attach it to the Base Leg (10) with an
M8 x 35mm Bolt (68) and an M8 Locknut (69).
Then, tighten the two indicated M10
Locknuts (74).
3
68
74
9
4. Orient the Front Stabilizer (13) so that the
welded tubes (B) are in the locations shown.
Attach the Front Stabilizer (13) to the Base Leg
(10) with two M8 x 68mm Screws (73).
4
10
B
C
73
73
13
12
5
5. Orient the Rear Stabilizer (12) so that the welded
tubes (C) are in the locations shown.
Attach the Rear Stabilizer (12) to the Base (6)
with two M8 x 68mm Screws (73).
6
10
6
7
6. Attach a Pedal (19) to the Left Pedal Leg (8)
with four M6 x 14mm Screws (81); start all the
Screws, and then tighten them.
Repeat this step on the other side of the
stepper climber.
7. Attach the left Resistance Cylinder (9) to the Left
Pedal Leg (8) with an M8 x 40mm Bolt (80) and
an M8 Locknut (69).
Repeat this step on the other side of the
stepper climber.
19
81
8
80
81
9
8
69
Tabla de contenidos
Otros manuales de Máquina paso a paso de Weslo
Weslo
Weslo Ascent 2010 Manual de usuario
Weslo
Weslo Ascent 720 Manual de usuario
Weslo
Weslo Aerostep 600 Manual de usuario
Weslo
Weslo Ascent 775 Manual de usuario
Weslo
Weslo Ascent 740 Manual de usuario
Weslo
Weslo Ascent 725 Manual de usuario
Weslo
Weslo Ascent 745 Manual de usuario
Weslo
Weslo WLEL31216.0 Manual de usuario
Weslo
Weslo Ascent 730 Manual de usuario
Weslo
Weslo MOMENTUM WLEL7397.1 Manual de usuario
