Wenger Nomad Manual de usuario
Nomad LED Compass
Instruction Manual
Table of Contents
CraftedforLife..............................................2
WatchComponents..........................................3
General Features and Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Operating Instructions
Setting the Analog Watch Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Digital Time and Calendar Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Precautions and Tips for Using Compass. . . . . . . . . . . . . . . . . . . . . . . . . 8
DigitalCompassInstructions..................................9
CaringForYourWatch.......................................20
WarrantyInformation........................................21
WarrantyServiceInstructions..................................22
RegistrationForm...........................................23
1
Crafted For Life
Delémont, Switzerland 1893
Over a century ago Wenger built a factory in this tiny Swiss village and
transformed it into production headquarters for the Genuine Swiss Army
Knife™still used by the Swiss Army today. As it was 100 years ago each tool
implement and knife manufactured by Wenger is crafted by hand in solid
stainless steel and each individually inspected for quality and craftsmanship.
This same attention to detail has been applied to genuine Wenger watches.
Wenger watches are Swiss-designed -engineered and -crafted with only the
most accurate Swiss movement available. Each watch is constructed with
form and function that last a lifetime. As with the genuine Swiss Army knife
Wenger watches are durable high quality and versatile enough for use on any
occasion. Wenger watches are engineered to provide the same resourcefulness
as the genuine Swiss Army knife supplying functionality beyond the everyday.
2
Wenger Watch Components
Movements – Swiss mechanism.
Case Body – All stainless steel for quality and durability.
Water- esistant – To 100m (330').
Straps/Bracelets – Stainless steel bracelets featuring dive buckles and safety
clasps. Straps are offered in genuine calfskin leather specially treated rubber-
ized leather water-resistant rubber or nylon or other high-quality materials.
Luminous Markers – Hands markers and numerals may be overlaid with
Super Luminova
®a luminous material which recharges in seconds when
exposed to direct sunlight for improved extended nighttime visibility.
Crystals – The crystal is the clear surface which covers the watch dial.
Crowns – Crowns are stainless steel knobs on the sides of the case body used
to set the date and time or rotate the internal bezel.
3
4
General Features and Components
Compass
bu on
Minute hand
Day bu on
Second hand
Strap or bracelet
Inner bezel
Directional arrow
(when luminated)
Hour hand
Crown
Da e bu on
Time bu on
5
Compass Button
•To select Compass Mode.
• To calibrate compass.
Day Button
•To select “Day of Week” display.
Time Button
• To display digital time in hour-minute or seconds.
• To enter the Time Setting Mode.
Date Button
•To select “Date and Month” display.
6
Setting the Analog Watch
1. To set the analog time gently pull out the crown to Position 2.
2. Second hand will stop and digital time will flash.
3. Rotate crown so the watch hands move clockwise to the correct time.
Second Hand Alignment
To synchronize the digital with analog seconds push in the crown to return
it to Position 1 at correct moment.
Important note:
If the analog “second”
and the digital “second”
are not synchronized the
digital setting may not
function properly.
Position 1 (fully depressed) Position 2 (1 click out)
7
Setting the Digital Time and Calendar
1. Hold down the Time Button until the digital seconds flash.
2. Press the Compass Button to scroll through minutes hours year month
and date as well as date format (both month and date flashing) time
format (12 hour to 24 hour) and seconds.
3. Use the Day Button to increase to the desired value. Hold it down to
quickly increase the value.
4. Press the Date Button to return to the previous display.
Date Display
1. Press the Date Button to switch on the Date display.
2. The display will show for 2 seconds and will turn off automatically.
Note: The date format (Month-Date or Date-Month) can be set in the
“Setting the Digital Time and Calendar”.
8
Day of the Week Display
1. Press the Day Button to switch on the Day of the Week display.
2. The display will show for 2 seconds and will turn off automatically.
Precautions and Tips for Using Compass
1. Keep the watch away from any magnets or appliances that contain magnets
or generate magnetic fields such as mobile phones speakers motors etc.
2. This watch points to the magnetic north which is slightly different from
true north. Check the “What is Magnetic Declination” section on p.12 for
more details.
3. Perform compass calibration (see p.10) frequently or under the following
conditions:
• First time using the compass
• When the measuring result is suspected to be incorrect
• When the battery has been replaced
• When the watch is in a different location from where it was
previously calibrated.
9
Compass Display
1. Press the Compass Button to switch on the compass display.
2. The compass bearing in degrees and an arrow indicator under the
Wenger cross will display.
3. The display will show for 30 seconds and turn off automatically.
Otros manuales para Nomad
2
Tabla de contenidos
Otros manuales de Mirar de Wenger
Wenger
Wenger AquaGraph 70832 Manual de usuario
Wenger
Wenger Commando Traveler Series Manual de usuario
Wenger
Wenger Urban Metropolitan Automatic SELLITA SW... Manual de usuario
Wenger
Wenger Nomad Manual de usuario
Wenger
Wenger Commando Traveler Manual de usuario
Wenger
Wenger Attitude Automatic ETA 2824-2 Manual de usuario
Wenger
Wenger Standard Watches Manual de usuario
Wenger
Wenger 70100 Manual de usuario
Wenger
Wenger Clock Manual de usuario
Wenger
Wenger Yacht Racer Manual de usuario
