Figure 6
An exhaust flange can be purchased
separately. Exhaust flange fits over
the top exhaust fan duct improving
cooling efficiency, allowing hot air to
be exhausted to another locaon.
1. Remove exhaust flange from carton.
2. Place exhaust flange on the top of
air condioner.
3. Use screws (enclosed inside of box
with exhaust flange) to install
exhaust flange on air condioner as
shown in Figure 5.
An ambient air adapter can be
purchased separately. Air adapter
fits over the condenser to duct
condenser air to the unit to
improve cooling efficiency.
1. Remove air adapter from carton.
2. Place air adapter on the side of
air condioner.
3. Use screws (enclosed inside of
box with air adapter) to install
the adapter on the air
condioner as shown in Figure 6.
1. Remove the power cord
holder from the accessory pack
2. Place the power cord holder
on the rear of the unit as shown
in Figure 3
3. Use screws to install the power
cord holder to the rear of the unit
(screws inside the accessory pack)
1. Remove the cool air outlet
hose from the box
2. Place the cool air outlet
hose on the front top of the
unit as shown in Figure 4
3. Use screws to install the cool
air outlet hose to the front of
the unit (screws aached to
the cool air outlet hose)
Condensate water tank
(Water level is sensed, and
the unit operaon is
stopped when tank is full.
An alarm will be displayed.
Empty the tank and replace
to resume operaon)
Component Parts
Power Cord Holder Discharge Ducts /
Supply Air Duct
EXHAUST FLANGE(Oponal) AMBIENT AIR ADAPTER
(Oponal)
