Welbilt MERRYCHEF eikon e2s Manual de usuario
e2s
Quick Start Guide
IMPORTANT INFORMATION - READ BEFORE USE - FULL GUIDE AVAILABLE FROM THE MERRYCHEF WEBSITE
GB
2Merrychef eikon e2s Quick Start Guide
Part Number 32Z3922 CE, GBR Issue 02 06/2018
SAFETY INFORMATION
SAFETY INFORMATION
You are strongly advised to read all safety instructions
before installing or using the microwave oven. Chapter
3 of the Installation and User Manual contains
comprehensive safety information, with which you
should familarise yourself.
MAINTENANCE AND REPAIRS
Users are cautioned that maintenance and repairs
should be performed by a Merrychef®authorised
service agent using genuine Merrychef®replacement
parts. Merrychef®will have no obligation with respect
to any product that has been improperly installed,
adjusted, operated or not maintained in accordance
with national and local codes or installation
instructions provided with the product, or any product
that has its serial number defaced, obliterated or
removed, or which has been modied or repaired
using unauthorised parts or by unauthorised service
agents. For a list of authorised service agents please
refer to your distributor.
a) Do not attempt to operate this oven with the door
open since open-door operation can result in harmful
exposure to microwave energy. It is important not to
defeat or tamper with the safety interlocks.
b) Do not place any object between the oven front
face and the door or allow soil or cleaner residue to
accumulate on sealing surfaces.
c) Do not operate the oven if it is damaged. It is
particularly important that the oven door closes
properly and that there is no damage to the
(1) door (bent) (2) hinges and latches (broken or
loosened) (3) door seals and sealing surfaces.
d) The oven should not be adjusted or repaired by
anyone except properly qualied service personnel.
PRECAUTIONS TO AVOID
POSSIBLE EXPOSURE TO
EXCESSIVE MICROWAVE ENERGY
3
Merrychef eikon e2s Quick Start Guide
Part Number 32Z3922 CE, GBR Issue 02 06/2018
INTRODUCTION . . . . . . . . . . . . . . . . . . 4
About this guide . . . . . . . . . . . . . . . . . . . . 4
Parts and their function . . . . . . . . . . . . . . . . . 4
INSTALLING THE APPLIANCE . . . . . . . . . . . . 6
Unpacking the appliance . . . . . . . . . . . . . . . . . 6
Electrical installation requirements . . . . . . . . . . . . . 6
Requirements for the supporting surface. . . . . . . . . . . 6
Minimum space required . . . . . . . . . . . . . . . . . 6
TURNING THE OVEN ON . . . . . . . . . . . . . . . 7
MAIN MENU AND SETTINGS . . . . . . . . . . . . .8
Main Menu . . . . . . . . . . . . . . . . . . . . . . 8
Settings Menu . . . . . . . . . . . . . . . . . . . . . 8
Changing the settings . . . . . . . . . . . . . . . . . . 9
SETTING THE DATE AND TIME . . . . . . . . . . . 10
OPERATION MODE/NAVIGATION SETTINGS. . . . . . 11
CREATING A COOKING PROFILE . . . . . . . . . . 12
Creating the cooking prole steps . . . . . . . . . . . . 12
Running and saving a cooking prole . . . . . . . . . . . 14
QUICK SERVE MODE . . . . . . . . . . . . . . . 15
Using a cooking prole (Quick Serve mode) . . . . . . . . 15
FULL SERVE MODE . . . . . . . . . . . . . . . . 16
Choosing cooking proles for the Press&Go menu . . . . . . 16
Running a cooking prole from the Press&Go menu . . . . . 17
Using a cooking prole (Full Serve mode) . . . . . . . . . 18
CLEANING PROCEDURES . . . . . . . . . . . . . 19
Cooling down the cavity . . . . . . . . . . . . . . . . 19
Cleaning the oven and oven parts . . . . . . . . . . . . 20
Applying the protective chemical . . . . . . . . . . . . . 22
Cleaning the air lter . . . . . . . . . . . . . . . . . 23
CONTENTS
EC Declaration of Conformity
Section 1.1 of the Installation and User Manual
contains the EC Declaration of Conformity relating to
the microwave oven.
Environmental protection
Section 1.2 of the Installation and User Manual
contains full details of the Merrychef environmental
management policy.
4Merrychef eikon e2s Quick Start Guide
Part Number 32Z3922 CE, GBR Issue 02 06/2018
The Merrychef eikon e2s microwave combination oven offers
you the exibility of combination cooking with additional control
over fan speed and microwave power.
Combination cooking enables high quality results to be
achieved in a fraction of the time taken by conventional cooking,
particularly when baking, browning, roasting and grilling dishes.
Once established, precise instructions for combination or
convection cooking of selected items may be programmed into
the oven’s memory so that they can be repeated easily and
accurately. Up to 1024 programs can be stored and simply
recalled.
The oven controls offer even greater exibility by allowing
multistage programming. This enables the exact conditions
required for quality results to be set according to the food type.
A single cooking program can have up to six stages, each stage
controlled with its own time, fan speed and microwave power
settings,
About this guide
The purpose of this guide is to give a brief introduction to the
Merrychef eikon e2s oven and is intended to get you started as
quickly as possible.
Full details of the installation and operation of the oven are
given in the Installation and User Manual. Carefully read the
Installation and User Manual before using, handling and working
on this appliance.
INTRODUCTION
Parts and their function
1 ON/OFF appliance switch
Used to turn the microwave combination oven on and off.
Turning this switch off does not isolate the appliance from
the electricity supply.
2 easyToUCH®screen control panel
When the appliance is switched on the easyToUCH®screen
illuminates the user interface.
3 Nameplate
Located on the rear panel of the appliance the nameplate
states the serial number, model type and electrical
specications.
4 USB port
A USB socket located under the cover allows updates to
programs stored on the appliance.
See USB MenuConnect®Operating Instructions in Section
8.2.7 of the Installation and User Manual.
5 Air outlets
Air used to cool internal components and steam from the
cavity escape through the air outlet vents located on the
rear of the appliance. The air outlets must be kept free from
obstruction and they will not allow microwave energy to
escape into the environment.
6 Appliance door
The door is a precision-made energy barrier with three
microwave safety interlocks. Always keep it clean and do not
use it to support heavy objects.
See Cleaning procedures on page 19.
5
Merrychef eikon e2s Quick Start Guide
Part Number 32Z3922 CE, GBR Issue 02 06/2018
7 Airlter
The air lter situated at the lower front of the appliance is
part of the ventilation system. Keep it free of obstruction and
clean it daily as described under Cleaning procedures on
page 19. The appliance will not operate without the air lter
tted.
8 Door handle
The door handle is a rigid bar which is pulled downwards
and away from the appliance to open it.
9 Door seals
The door seals ensure a tight seal around the door. Always
keep them clean and check regularly for signs of damage.
At the rst sign of wear have them replaced by a Merrychef
approved service agent.
See Cleaning procedures on page 19.
10 Air diffuser
(Not tted to all appliances.) Keep the air diffuser clean and
free of debris. Take great care when cleaning this area of
the appliance noting the different requirements shown under
Cleaning procedures on page 19.
11 Cavity
The cavity (cooking chamber) is constructed from
stainless steel and used for cooking products. Keep it
clean by following the cleaning instructions in the Cleaning
procedures on page 19.
1
9
11
10
2
8
4
7
6
6Merrychef eikon e2s Quick Start Guide
Part Number 32Z3922 CE, GBR Issue 02 06/2018
Empty weight of appliance
e2s High Power version 134 lbs (61.0 kg)
e2s Standard Power version 114 lbs (51.7 kg)
Minimum space required
The following diagram and table show the minimum space
required for the appliance. They also show the minimum
horizontal distances from adjacent walls and surfaces.
ASafety clearance from the top 2 in (50 mm)
BDepth requirement, appliance 12.2 in (310 mm)
door open at 90°
Safety clearance on left- and 0 in (0 mm)
right-hand side and at rear
Unpacking the appliance
Unpack the appliance following the instructions in Chapter 5 of
the Installation and User Manual, which contains full information
on the requirements for the installation location, unpacking the
appliance and mounting it on a work surface.
Electrical installation requirements
Make sure you plan the electrical installation of the appliance in
advance. Chapter 6 of the Installation and User Manual contains
full information on planning the electrical installation and the
electrical installation requirements.
Requirements for the supporting surface
The supporting surface must have the following properties:
● The supporting surface must be at and level.
●The supporting surface must be able to bear the in-use weight
of the appliance plus the weight of the structure supporting the
appliance.
●The structure supporting the appliance (work surface or stand)
must be able to bear the in-use weight of the appliance.
The Installation and User Manual contains safety
instructions relating to the unpacking and mounting of
the appliance. You must read these instructions in full
before unpacking and installing the appliance.
The Installation and User Manual contains safety
instructions relating to safe working during the
electrical installation. You must read these instructions
in full before commencing the electrical installation.
INSTALLING THE APPLIANCE
The safety clearance on the top must always be
complied with.
7
Merrychef eikon e2s Quick Start Guide
Part Number 32Z3922 CE, GBR Issue 02 06/2018
To start up the oven:
1. Make all the relevant safety checks and ensure the appliance
is clean and empty. Then switch the appliance ON.
2. The easyTouch® screen illuminates with the display briey
showing the serial number and appliance data. (To keep the
data on the screen, lightly tap the screen once to freeze the
display. Tap again to continue.)
3. When the appliance is set up with two or more preheating
temperatures a choice is displayed. Select the temperature
required to start preheating the cavity.
(Scroll arrows at the bottom of the screen indicate that there
are more temperature choices not shown on the screen.)
4. During preheating the display shows the progress as the
cavity heats up to the set temperature. To stop the cavity
heating up touch the red ‘X’ symbol at the bottom of the
screen.
5. The appliance is ready to use when either the Cookbook or
Main Menu is displayed. If the Cookbook is displayed, press
the Backspace button in the bottom left-hand corner of the
screen to display the Main Menu.
6. The Main Menu is displayed.
TURNING THE OVEN ON
Before turning on the oven, use the checklists in
Section 7.2 of the Installation and User Manual to
make sure that all important requirements are met.
1 2
3 4
5 6
8Merrychef eikon e2s Quick Start Guide
Part Number 32Z3922 CE, GBR Issue 02 06/2018
Settings Menu
The Settings Menu comprises the following functions:
Main Menu
MAIN MENU AND SETTINGS
Development Mode
Development Mode enables multistage cooking proles
to be developed and stored for reuse.
Press&Go
Press&Go allows quick access to use the cooking
proles that are already stored.
Cookbook
Cookbook contains the cooking proles stored in the
memory of the appliance. It displays favourites, cooking
prole groups and a list of all cooking proles available.
Cleaning/Temp Change
Cleaning/Temp Change allows the cavity temperature
to be changed and the appliance to be prepared for
cleaning, with reminders displayed to assist during the
cleaning process.
Settings
Settings are used to control the appliance settings and
functions, including setting time and language, loading
cooking proles and displaying service and maintenance
information.
Operating mode/navigation settings (see page 11)
Language options
Temperature settings and labels
Service information and error logs (password required)
Cooking prole counters
Date and time settings (see page 10)
Speaker sound levels
Timer (Temperature/ON/OFF)
USB program connection
Temperature band
Change settings/service access passwords
Screen saver
9
Merrychef eikon e2s Quick Start Guide
Part Number 32Z3922 CE, GBR Issue 02 06/2018
Changing the settings
The options on the Settings Menu allow you to change the way
in which the oven operates. For example, you can set the date,
time and language, change the speaker sound level or select a
different operating mode.
To change the settings:
1. Select the Settings symbol from the Main Menu screen.
2. Enter the password. (For information on setting a password,
see Section 8.2.6 of the Installation and User Manual.)
3. Select the green tick to display the Settings Menu.
4. Select the required setting.
●If necessary, use the down arrow at the bottom of the
screen to display the second set of functions.
● When nished with a setting, press the Backspace button
to return to the Settings Menu.
●Make any other changes to the settings as required.
5. Press the Backspace button to exit the Settings Menu.
6. A prompt appears to either ‘SAVE’ or ‘DISCARD’ any
changed settings. Select the appropriate option.
The date and time settings are described on page 10 and the
operating mode/navigation settings on page 11.
For all other settings, refer to Section 8.2.6 of the Installation
and User Manual.
5
1 2
43
5 6
10 Merrychef eikon e2s Quick Start Guide
Part Number 32Z3922 CE, GBR Issue 02 06/2018
It is important to set the correct date and time when rst
switching on the oven, as the error log uses these settings and
this will help with maintenance and servicing.
To set the date and time:
1. Select the Settings symbol from the Main Menu.
2. Select the Date and Time symbol.
3. To display the day rst, followed by the month and year,
deselect the MM-DD-YY checkbox.
4. Change the date:
i. Select DAY, enter the correct day on the keypad and
select the green tick.
ii. Select MONTH, enter the correct month on the keypad
and select the green tick.
iii. Select YEAR, enter the correct last two digits of the year
on the keypad and select the green tick.
5. Select the day of the week by cycling through the weekdays.
6. Choose between AM, PM and the 24-hour clock.
7. Change the time:
i. Select HOUR, enter the correct hour on the keypad and
select the green tick.
ii. Select MIN, enter the correct minutes on the keypad and
select the green tick.
8. Press the Backspace button to exit the Settings Menu and
select SAVE.
SETTING THE DATE AND TIME
1 2
3 5
6
4
8
7
Otros manuales para MERRYCHEF eikon e2s
2
Tabla de contenidos
Otros manuales de Horno de Welbilt
Welbilt
Welbilt Convotherm maxx 6.10 Manual de usuario
Welbilt
Welbilt Convotherm 4 easyTouch Manual de usuario
Welbilt
Welbilt Convotherm OES mini 6.06 Manual de usuario
Welbilt
Welbilt Convotherm OES 6.10 Mini Manual de usuario
Welbilt
Welbilt Convotherm mini black easyTouch 10.10 Manual de usuario
Welbilt
Welbilt Convotherm maxx pro Series Manual de usuario
Welbilt
Welbilt Merrychef eikon e1s Manual de usuario
Welbilt
Welbilt Convotherm OES mini easyTouch Series Manual de usuario
Welbilt
Welbilt Convotherm maxx pro Manual de usuario
Welbilt
Welbilt MERRYCHEF conneX 32Z9231 Manual de usuario
Welbilt
Welbilt Convotherm OES mini easyStart Manual de usuario
Welbilt
Welbilt Convotherm OES 10.10 mini easyTouch Manual de usuario
Welbilt
Welbilt Convotherm UleasyTouch Manual de usuario
Welbilt
Welbilt Convotherm maxx Cmx eT 6.10 ES Manual de usuario
Welbilt
Welbilt maxx pro Manual de usuario
Welbilt
Welbilt Convotherm OES 6.10 Mini Manual de usuario
Welbilt
Welbilt Convotherm 4 easyTouch Manual de usuario
Welbilt
Welbilt 32Z9000 Manual de usuario
Welbilt
Welbilt Convotherm 4 easyTouch Manual de usuario
Welbilt
Welbilt Convotherm OES mini Series Manual de usuario
