An ISO 9001:2008
Certified company
MFR.OF INDUSTRIAL CENTRIFUGAL PUMPS
Regd .Office & works : Plot No : 57/9 , Phase-1 , Nr.Kiran Industries ,G.I.D.C ,Vatva , Ahmedabad-382445, Gujarat , India
Phone : 079-32917873 Email : jramolia@sify.com , marketing@weltechpumps.com
Web : www.weltechpumps.com
_________________________________________________________________________________
Page 4 of 25
CP Series
Introduction
Preface
This manual provides the information for proper functioning and maintenance
of the pump and contains instructions to prevent possible accidents and damages
and to ensure the safe and smooth functioning of the pump.
Before commissioning of the pump, read the manual carefully and strictly follow the
instructions.
General information and safety instruction
The product supplied by WELTECH has been designed with safety in mind.
Pump installation area must be kept clean and free of obstructions that may
restrict safe access to the controls and maintenance access point
The pump nameplate is fitted to each unit must not be removed. Loss of it
could make identification impossible which in turn could cause difficulty in
obtaining spare parts. If accidental loss occurs, contact WTE immediately.
Access to the equipment should be restricted to the personnel responsible for
installation, operation and maintenance and they must be trained adequately
qualified and supplied with appropriate tools for their respective tasks.
All personnel that are responsible for installation-operation-maintenance of
the pump must study the product instruction manual before any work is done
and that they will comply with all local and industry based safety instructions
and regulations.
Safety glasses or goggles should be worn where working with pressurized
systems and hazardous substances. Other personal protection equipments
must be worn where local rules apply.
Do not wear loose clothing or jewelry which could catch on the controls or
become trapped in the equipments.
Read the instruction manual prior to installation and confirm that the manual is
relevant copy by comparing pump type on the nameplate and with that on the
manual.
Note the ‘limits of product application and permissible use’ specified in the
manual. Operation of the equipment beyond those limits will increase the risk
from hazardous and may lead to premature hazardous pump failure.
Clear and easy access to all controls, gauges, and dials etc. must be
maintained at all the times.
Hazardous or flammable material must not be stored in pump rooms unless
safe area or racking and suitable containers have been provided.
