WeGo CLIP Manual de usuario
track your activities and sleep
for a better, healthier you!
www.joinwego.com
User Manual
CLIP
WO1613IS01SPO.indd 1 11/5/14 5:10 PM
1
WeGo™CLIP User Manual
Contents
Welcome to WeGo™ 2
Charging Your CLIP 3
Downloading and Setting Up the Join WeGo™ App 4
Syncing Your CLIP 5
Using Your CLIP Throughout the Day 6
Using Your CLIP During Sleep Sessions 8
Regulatory and Safety Notices 9
Warranty 10
WO1613IS01SPO.indd 1 11/5/14 5:10 PM
2
WeGo™CLIP User Manual
Welcome to WeGo™
Congratulations on the purchase of your new WeGo™CLIP!
Included in the package are the following:
Display Panel
Main ButtonUSB
Charging Port
CLIP Activity Tracker CLIP Silicone Waist Holder
Quick Start Guide
WeGo
™
CLIP QUICK START GUIDE
Congratulations on the purchase of the WeGo CLIP Activity
Tracker.
Included here are the initial steps to get you go ing.
Please visit ww w.JoinWeGo.com for more details.
USB Charging Cable
WO1613IS01SPO.indd 2 11/5/14 5:10 PM
3
WeGo™CLIP User Manual
Charging Your CLIP
Please fully charge your CLIP before first use. Also, remove the plastic cling that is affixed
to the CLIP’s top panel.
To charge, use the included USB charger. Lift the silicone flap on side of the CLIP to expose
the port and plug the smaller end of the charger into it. Now plug the other end into either
a USB port on a computer or a charging station that plugs into a wall outlet (not included
with your purchase of the CLIP).
The display will illuminate showing you that the device has started charging. A complete
charge should take approximately 3 to 4 hours.
Once fully charged your CLIP is ready to be synced with your smartphone or tablet.
The CLIP will run for approximately 7 days once fully charged. When the device is running
out of battery power, a “LOW BATTERY” message will appear on the display as a reminder
to charge your CLIP.
WO1613IS01SPO.indd 3 11/5/14 5:10 PM
4
WeGo™CLIP User Manual
Downloading and Setting Up the Join WeGo™ App
Before you can sync the CLIP to your smartphone or tablet, you must download the Join
WeGo™app in the App Store or Google Play. You can find the app by typing “JOIN WEGO”
in the search field within the app stores.
After the app download is complete, you will be asked to log into an existing MapMyFitness
account or create a new one. Below account setup, please fill in your birthday and height.
Once this has been completed, there are a few more details needed before your profile is
ready to go. Add a profile picture, your current weight, and gender (this will help us calculate
specific data to each person and their activities).
Once setup is complete, set your goals, and start tracking a happier, healthier you!
WO1613IS01SPO.indd 4 11/5/14 5:10 PM
5
WeGo™CLIP User Manual
Syncing Your CLIP
Make sure that Bluetooth is enabled on your phone before proceeding.
To initiate the sync, open the app and make sure you are in the Dashboard. If you are not
in the Dashboard press the menu icon (3 solid lines) and select.
Next, press the sync icon on the top right which will open up instructions to help you properly
transfer data from your device to the app.
Once completed, you will receive a “SUCCESSFUL SYNC” message, and the device will
go back to the normal display with the app showing all updated data.
Please note: A sync should be performed before you start using your new device.
WO1613IS01SPO.indd 5 11/5/14 5:10 PM
6
WeGo™CLIP User Manual
Using Your CLIP Throughout the Day
How to Wear
You can either use the CLIP with or without the silicone waist holder. When used in the
holder, place the CLIP anywhere on your clothing…waist, pocket, sports bra, etc. When
used without the holder, place CLIP in a pocket or pouch.
Viewing the Data
Pressing the main button will illuminate the screen. You can continue to press the button to
scroll through the various metrics. Those metrics include:
Steps
steps taken
during a 24
hour period
Distance
distance
traveled
during a 24
hour period
Active Time
hours/minutes
moved during a
24 hour period
Calories
calories burned
during a 24
hour period
Time
time of day
Sleep
initiate sleep
quality/time
tracking
WO1613IS01SPO.indd 6 11/5/14 5:10 PM
7
WeGo™CLIP User Manual
Using Your CLIP Throughout the Day
How the Data is Captured
The CLIP displays activities from midnight to midnight. Each evening at 12:00am it resets
to zero in order to begin capturing those activities/sleep for a new day.
Clearing the Data
Since the CLIP is designed to capture 24 hour activity, the only way to zero out the data
is to do a manual reset by pressing and holding the small “RESET” button on the back of
the unit.
Please note that this not only clears your data, but resets the device back to original factory settings.
WO1613IS01SPO.indd 7 11/5/14 5:10 PM
8
WeGo™CLIP User Manual
Using Your CLIP During Sleep Sessions
How to Wear During Sleep
It is recommended to place the CLIP inside
the silicone holder and clip the device on an
article of clothing you wear to sleep.
Initiating the Sleep Mode
•Tap the main button once to activate the
display.
•Next, hold down the main button for about
2-3 seconds and the display will show a
timer and bed icon.
•Once a sleep session is successfully
activated, a “GOOD NIGHT” message will
scroll onto the screen and the display will
fade out.
Waking from Sleep Mode
•Tap the main button once to activate the
display. You will see the current sleep
session in progress.
•Next, hold down the main button for about
2-3 seconds and a “GOOD MORNING”
message will appear indicating your sleep
session has been completed.
Frequency of Sleep Mode
•You can enter into and out of multiple
sleep sessions during a 24 hour period.
The CLIP device will record these and you
can view the data on the Join WeGo™ app
after you sync the device.
WO1613IS01SPO.indd 8 11/5/14 5:10 PM
9
WeGo™CLIP User Manual
Regulatory and Safety Notices
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
1. Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the product.
2. NOTE: This product has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
product generates uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If the
product does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product
and receiver.
• Connect the product into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This digital apparatus does not exceed the Class
B limits for radio noise emissions from digital
apparatus as set out in the interference-causing
equipment standard entitled “Digital Apparatus,”
ICES-003 of the Canadian Department of
Communications.
WO1613IS01SPO.indd 9 11/5/14 5:10 PM
Tabla de contenidos
Otros manuales de Rastreador de actividad física de WeGo
