About the Papa pump
Water Source
a typical schematic layout for a Papa Pump system
B
A
C
A: Catchment Tank
B: Supply Tank
C: Pump Chamber
D: Water Storage
D
Flow
Water powered pumping traditionally goes back 1000’s of years where it was
used primarily for low head irrigation. More recently, from the late 1700’s
hydraulic ram pumps were developed as an efficient and effective means of
transporting water over long distances and great heights where they have been
utilised to provide water in most parts of the world prior to the advent of
‘previously inexpensive’ mains water and electricity supplies.
Developed within the UK in the mid-90s, the Papa Pump represents a modern,
smaller, lighter and more effective alternative and is used in many countries to
provide water for a wide variety of uses. With the addition of the revolutionary
composite version, Papa continues to ensure that your water transport
requirements are cost-effective and delivered in a reliable and sustainable
system.
Simple water power
By utilising a naturally flowing water source, the Papa pump is able to transport
up to 30% of that water to the desired location, allowing the residual water to be
returned to the natural source. With minimal maintenance and zero fuel costs
and emissions, the Papa Pump will provide you with a clean and efficient system
for your water transportation requirements including agriculture, horticulture,
irrigation, domestic and industrial use.
4