Watchguard SSL 100 Manual de usuario

WatchGuard® Technologies, Inc.

Quick Start Guide

WatchGuard® SSL 100

• Find the serial number on your device and record it.

• Go to http://www.watchguard.com/activate

• Log in.

NOTE: If you are new to WatchGuard, follow the instructions to create a prole.

• Follow the instructions on the screen.

• It is a good idea to download and extract your WatchGuard SSL

feature key during activation. Extract the feature key on to the

computer you will use to congure your WatchGuard SSL 100.

Connect your WatchGuard SSL 100

• Make sure your computer is congured with a static IP address on the

192.168.111.0/24 network.

NOTE: The default IP address on the WatchGuard SSL 100 is 192.168.111.1.

• Connect the Ethernet interface on your computer to Eth1 on your WatchGuard SSL

device.

Getting Started

• Power on the WatchGuard SSL 100.

Run the Quick Setup Wizard

• Open a web browser and type: https://192.168.111.1:8443. Follow the directions in the

wizard to set up your WatchGuard SSL device.

NOTE: Because the WatchGuard SSL 100 uses a self-signed certicate, you may see a certicate warning in

your browser. It is safe to ignore the warning (Internet Explorer) or to add a certicate exception (Mozilla

Firefox).

• In the wizard, you must decide on the conguration mode that bests suits your

network. These diagrams show the two conguration modes:

Eth 1

green

Single

Interface

Mode

Dual

Interface

Mode

Firewall

DMZ 1

DMZ 2

Eth 0

Eth 1

switchswitch

Trusted Resources

WatchGuard SSL 100

Firewall

DMZ 1

Eth 0

switch

WatchGuard SSL 100

Trusted Resources

Congratulations! You have nished basic network setup of your WatchGuard SSL 100.

You can now put the WatchGuard SSL 100 in your network and use the WatchGuard SSL

Web UI to continue conguration, management, and monitoring tasks.

Next Steps

If you did not upload your feature key in the wizard, you can get your feature key at

https://www.watchguard.com/archive/getcredentials.asp. From the Web UI, go to Monitor

System > Feature Key to upload it.

Download and Install Latest Software

• Go to www.watchguard.com/archive/softwarecenter.asp

• Find and download the latest version of WG SSL OS.

• From the Web UI, go to Manage System > Device Update.

For more information about how to congure your WatchGuard SSL 100, go to

www.watchguard.com/help/documentation and open the current help system.

If you congured your WatchGuard

SSL in Single Interface mode…

• When you put the WatchGuard SSL

in your network, make sure you

connect to Eth0. Eth1 is available

only during the Quick Setup

Wizard.

• Reset the IP address on your

computer.

• To connect to the WatchGuard

SSL Web UI, open a web browser

and type: https://[Eth0 IP

address]:8443

If you congured your WatchGuard

SSL in Dual Interface mode…

• When you put the WatchGuard SSL

in your network, make sure you

connect both Eth0 and Eth1.

• Reset the IP address on your

computer.

• To connect to the WatchGuard

SSL Web UI, open a web browser

and type: https://[Eth1 IP

address]:8443

ADDRESS: 505 Fifth Avenue South, Suite 500, Seattle, WA 98104

WEB: www.watchguard.com • U.S. SALES: 1.800.734.9905 • INTERNATIONAL SALES: +1.206.613.0895

either trademarks or registered trademarks of WatchGuard Technologies, Inc. in the United States and/

or other countries. All other trademarks and tradenames are the property of their respective owners.

P.N. 352-3035-100 WGPE66377_052709

1.877.232.3531 +1.206.613.0456 www.watchguard.com/support

(U.S. and Canada) (all other countries)

WATCHGUARD TECHNICAL SUPPORT

Tabla de contenidos

Otros manuales de Cortafuegos de Watchguard

Watchguard

Watchguard XTM 8 series Manual de usuario

Watchguard

Watchguard XTM 8 series Manual de usuario

Watchguard

Watchguard XTM 1050 Manual de usuario

Watchguard

Watchguard Firebox M4800 Manual de usuario

Watchguard

Watchguard XCS Series Instrucciones de instalación

Watchguard

Watchguard XTM 2520 Manual de usuario

Watchguard

Watchguard Firebox V10 Manual de usuario

Watchguard

Watchguard Firebox T70 Manual de usuario

Watchguard

Watchguard Firebox SOHO 6.1 Manual de usuario

Watchguard

Watchguard Firebox SOHO 6 Wireless Manual de usuario

Watchguard

Watchguard Firebox Vclass Manual de usuario

Watchguard

Watchguard Firebox t10 Manual de usuario

Watchguard

Watchguard XTM 330 Manual de usuario

Watchguard

Watchguard Firebox M4600 Instrucciones de instalación

Watchguard

Watchguard Firebox V10 Manual

Watchguard

Watchguard XTM 5 Series Manual de usuario

Watchguard

Watchguard Firebox T25-W Manual de usuario

Watchguard

Watchguard SOHO Manual de usuario

Watchguard

Watchguard Firebox SOHO 6 Wireless Manual de usuario

Watchguard

Watchguard Firebox M5800 Instrucciones de instalación

Watchguard

Watchguard Firebox T35-R Manual de usuario

Watchguard

Watchguard QMS 1200 Manual de usuario

Watchguard

Watchguard Firebox SOHO 6 Wireless Guía de referencia

Watchguard

Watchguard Firebox V60 Instrucciones de instalación y funcionamiento

Manuales populares de Cortafuegos de otras marcas

Cisco

Cisco S190 Manual de usuario

Fortinet

Fortinet FortiGate Voice Series Manual de usuario

ADTRAN

ADTRAN NetVanta 2300 Manual de usuario

SecureLogix

SecureLogix ETM System Manual de usuario

NETGEAR

NETGEAR ProSafe FVX538 Manual de usuario

Lanner

Lanner FW-8877 Manual de usuario

Huawei

Huawei USG6000 Series Manual de instalación y operación

H3C

H3C SecPath F5000-AI-15 Manual de usuario

Nexcom

Nexcom DNA 1150 Manual de usuario

Fortinet

Fortinet FortiGate-60 series Manual de usuario

Cisco

Cisco 3110 Manual

Draytek

Draytek Vigor2860 Series Manual de usuario

Lanner electronics

Lanner electronics FW-7650 Series Manual de usuario

Swisscom

Swisscom Internet Backup Manual de usuario

SonicWALL

SonicWALL NSa 5700 Manual de usuario

DPtech

DPtech FW1000 SERIES Manual de usuario

FEITIAN

FEITIAN MultiPass FIDO Manual de usuario

EBLOCKER

EBLOCKER PRO Manual de usuario