WatchGas PDM Manual de usuario

D e t e c t i on

PDM

Family Mono

Dock

USER MANUAL

www.watchgas.eu

Detection

PDM Mono Dock User Manual

D e t e c t i on

Contents

Contents 2

Warnings and avertisseement 3

Disposal 3

1. About the PDM Mono Dock 4

2. Component Descriptions 4

Button Functions 4

Led indication 4

Error Codes 4

3. Operating the PDM Mono Dock 5

Powering the PDM Mono Dock 5

Tuning on the PDM Mono Dock 5

Calibration Gas 5

4. Preform Bump/Calibration 5

Bump test 5

Calibration 5

SD Log 5

5. Load PDM Mono Dock conguration 5

Congure internal Clock 6

Setting up the conguration File 6

6. SD Logs 6

Get csv from SD 6

7. Specications 7

8. Troubleshooting 7

9. Cong example 8

10. Limited Warranty 9

Detection

User Manual PDM Mono Dock

D e t e c t i on

www.watchgas.eu

Warnings and avertisseement

• Inspect PDM Mono Dock before each use to ensure it is not damaged

• Always use certied valid gas cylinders

• The PDM Mono Dock is not designed to be used in hazardous environments

• Make a regular backup of the SD card containing log les

• Prevent the PDM Mono Dock to get in contact with liquids

• Prevent electrical or mechanical shocks, to PDM Mono Dock

• Clean PDM Mono Dock only with slightly damp cloth

• Read and understand this manual before use

DISPOSAL

The PDM Mono Dock Should not be disposed with your household waste. The PDM Mono Dock is ide-

ally suited for disposal within the waste electronic and electrical equipment (WEEE) recycling scheme.

Check your local authority, retailer or contact our technical support team for recycling/disposal advice

as regional variations apply. You may return the unit to us for safe dismantling and disposal.

Detection

PDM Mono Dock User Manual

D e t e c t i on

2. Component Descriptions

Button Functions

Button Bump: Bump test

Button Cal: Calibration

Led indication

Green light: Bump/Calibration success

Red light: Bump/Calibration fail

Blue light: Bump/Calibration in progress

Error Codes

The dock will give an error code by blinking the Bump or Calibration LED red and sounder will beep.

Count beep/blinks to refer the right error code see chapter trouble shooting

1. About the PDM Mono Dock

The PDM Mono Dock is designed as stand-alone portable Bump/Calibration station for use with the

PDM. Easy use with only 2 buttons to operated, transportable in a rugged case. Bump, Calibration and

event logs are safely stored on a SD card.

• Battery operated use up to 1600 test

• One button operation

• Rugged case

• SD card for logs

• Runs on 6X AA Batteries

• Optional 12v DC power supply

Detection

User Manual PDM Mono Dock

D e t e c t i on

www.watchgas.eu

3. Operating the PDM Mono Dock

Powering the PDM Mono Dock

The PDM Mono Dock can be powered by 6X 1.5V AA alkaline batteries or by applying a 12V dc external

power supply.

Tuning on the PDM Mono Dock

Turn on the PDM Mono Dock by pressing either the Calibration or Bump button. The PDM Mono Dock

will automatically wake up out of sleep mode which gets activated when not used. Through the use of

this sleep mode up to 1600 tests can be performed on 6X AA batteries.

Calibration Gas

Use the PDM Mono Dock with certied valid calibration gas. Use a demand ow regulator connect the

regulator with the gas sampling hose to the gas inlet right side of the case.

By default the PDM Mono Dock is programmed to use default gas concentration, as span gas for your

detector. If you have a bottle with a dierent concentration please change this setting to the right

values. Chapter Load PDM Mono Dock Conguration

Default value span gas:

O2: 18%

CO: 50ppm

HS: 10ppm

SO: 10ppm

NH3: 50ppm

4. Preform Bump/Calibration

Bump test

Place an turned on warmed up detector into the detector bay.

Ensure that Gas concentration in gas bottle matches with the gas bottle setting in the cong.ini

Press the Bump button.

Now the LED around the button will glow blue, when nished the LED will glow green.

If an error occurs the LED will blink the error code in RED. (see Error Codes for explanation)

If error stays existing after a retry try to determinate your error with chapter troubleshooting.

Calibration

Place an turned on warmed up detector into the detector bay.

Ensure that Gas concentration in gas bottle matches with the gas bottle setting in the cong.ini

Press the Cal button.

Now the LED around the button will glow blue, when nished the LED will glow green.

If an error occurs the LED will blink the error code in RED. (see Error Codes for explanation)

If error stays existing after a retry try to determinate your error with chapter troubleshooting.

SD Log

After testing an detector successful or fail, the PDM Mono Dock writes the data onto the SD card.

Bump, Calibration and event log of the tested instrument will be saved.

Detection

PDM Mono Dock User Manual

D e t e c t i on

5. Load PDM Mono Dock conguration

Congure internal Clock

To congure the internal clock use the WatchGas PDM IR Link software in combination with the IR Link.

1. Connect the IR Link and open the software

2. Press “cal button” and keep pressed until the LED turns yellow

3. Select correct COM port and select “open”

4. The MonoDock led will go Green and the time is set corresponding to the PC time.

Setting up the conguration File

In the Conguration File saved on the SD card serval information is stored.

1. Location: ll the Location of the bump station which will be logged into the datalog

2. Bump time: Time of gas exposure during bump test

3. Cal time : Time of gas exposure during calibration

4. Gasbottle: types of supported gas including the expected concentration in the bottle

5. Expiry: date of Gas bottle expiry

6. Lot: Lot number of used gas bottle

7. For each gas type the option to ll the Low/High and cal/bump due.

Conguration of the gas is automatically changed in the detector corresponding the cong le. If you

don’t want the dock to change the alarm settings you should uncommit the lines with “; “.

A cong example is include on the last page of the manual.

6. SD Logs

Every test is saved onto the SD Card, PDM Mono Dock log les are saved in a Comma Separated CSV

le witch can be parsed by a spreadsheet program.

Get csv from SD

Place the SD card with data into your computer and select the le you want to have

Detection

User Manual PDM Mono Dock

D e t e c t i on

www.watchgas.eu

7. Specications

Size 18.2 x 22.8 x 9.2 cm (7.16 x 8.97 x 2.91 in.)

Weight 885 grams (1.95 lbs.)

Operating Temperature 5 To + 40˚C (41 to 104˚F)

Battery Life 1600 bump tests

SD Capacity 8GB included

User Options Location, Gas expiration date, Gas lot number, gas concentrations,

bump / Cal time.

8. Troubleshooting

Blinks/beeps Error Solution

Dock Led won’t turn on Be sure there is a power connection or place

6 X 1,5 V AA batteries in the battery Pack.

2No SD Card found error Check SD card ensure the Lock function is not enabled

3No conﬁguration Load valid conﬁguration onto the SD Card

4Pump Blocked error

Make sure there are no obstructions in the hoses and ﬁlters

of the detector and , PDM Mono Dock. Verify that the gas-

bottle is not empty or connected improperly

5Mono Dock Defect error Contact retailer for support

6Communication error When there is a communication error make sure that the IR

communication window is clean and free of obstructions.

7No time set Reconﬁgure clock settings

Detection

PDM Mono Dock User Manual

D e t e c t i on

9. Cong example

See example below as cong.ini in the folder cong on the root of the sd card.

; Example conguration le for Watchgas PDM docking station

; Replace values @ co,h2s,o2,h3,so2 if a dierent bottle is used

; Update lot= and experiation= when replacing the gas bottle

; Extend basic Bump and Cal time when used for dient gasses as o2,co,h2s

; Basic time Bump 30 Cal 90

[main]

location=######

bump_time=30

cal_time=90

[gasbottle]

co=50

h2s=10

o2=18.0

so2=10.0

nh3=50

expiry=01-12-1970

lot=######

; Uncomment the settings below if you want the docking station

; to overwrite the settings in your gas detector when bumping

; or calibrating.

[co]

co_low_alarm=25

co_high_alarm=25

co_cal_days=180

co_bump_days=180

[h2s]

h2s_low_alarm=10.0

h2s_high_alarm=10.0

h2s_cal_days=180

h2s_bump_days=180

[nh3]

nh3_low_alarm=20

nh3_high_alarm=20

nh3_cal_days=180

nh3_bump_days=180

[so2]

so2_low_alarm=1.0

so2_high_alarm=2.0

so2_cal_days=180

so2_bump_days=180

[o2]

o2_low_alarm=19.5

o2_high_alarm=23.0

o2_cal_days=180

o2_bump_days=180

Detection

User Manual PDM Mono Dock

D e t e c t i on

www.watchgas.eu

10. Limited Warranty

WatchGas warrants this product to be free of defects in workmanship and materials-under normal

use and service for two years from the date of purchase from the manufacturer or from the product’s

authorized reseller.

The manufacturer is not liable (under this warranty) if its testing and examination disclose that the

alleged defect in the product does not exist or was caused by the purchaser’s (or any third party’s)

misuse, neglect, or improper installation, testing, or calibrations. Any unauthorized attempt to repair

or modify the product, or any other cause of damage beyond the range of the intended use, including

damage by re, lightening, water damage or other hazard, voids liability of the manufacturer.



In the event that a product should fail to perform up to manufacturer specications during the

applicable warranty period, please contact the product’s authorized reseller or WatchGas service

center at +31 (0)85 01 87 709 to repair/return information.

WatchGas B.V.

Klaverbaan 121

2908 KD Capelle aan den IJssel

+31 (0)85 01 87 709

The Netherlands

info@watchgas.eu - www.watchgas.eu

D e t e c t i on

photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher, except in the

case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law. For permission

requests, contact WatchGas B.V.

V1.0

Otros manuales para PDM

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Detector de gas de WatchGas

WatchGas

WatchGas PDM Manual de usuario

WatchGas

WatchGas AirWatch MK1.2 Manual de usuario

WatchGas

WatchGas QGM Manual de uso y cuidado

WatchGas

WatchGas PDM Manual de usuario

WatchGas

WatchGas POLI Manual de usuario

WatchGas

WatchGas AirWatch MK1.2 Manual de usuario

WatchGas

WatchGas UNI Sustainable Manual de usuario

WatchGas

WatchGas NEO MP181 Manual de usuario

WatchGas

WatchGas BAT-1 Manual de usuario

WatchGas

WatchGas POLI Manual de usuario

WatchGas

WatchGas UNI Disposable Manual de usuario

WatchGas

WatchGas Compliance Kiosk Manual de usuario

WatchGas

WatchGas QGM Manual de usuario

WatchGas

WatchGas PDM PRO CO2 Manual de usuario

WatchGas

WatchGas XDI Series Manual de instrucciones

WatchGas

WatchGas SST Dock Manual de usuario

WatchGas

WatchGas PDM Manual de usuario

WatchGas

WatchGas PDM PRO CO2 Manual de usuario

WatchGas

WatchGas UNI Sustainable Manual de usuario

WatchGas

WatchGas AirWatch Mk 1.0 Guía de referencia

WatchGas

WatchGas QGM Manual de uso y cuidado

WatchGas

WatchGas PDM+ Manual de usuario

WatchGas

WatchGas QGM Manual de usuario

WatchGas

WatchGas UNI Disposable Manual de usuario

Manuales populares de Detector de gas de otras marcas

Macurco

Macurco GD-6 Manual de usuario

Evikon

Evikon E2632 Manual de usuario

Critical Environment Technologies

Critical Environment Technologies CGAS-A Series Manual de usuario

MSA

MSA altair 5 Manual de usuario

DOD Technologies

DOD Technologies ChemLogic CL96 Manual de usuario

DEGA

DEGA NS III LCD Series Manual de usuario

RKI Instruments

RKI Instruments 35-3001A-08-01 Manual de usuario

PEMTECH

PEMTECH PT2008 Series Manual de usuario

Coster

Coster RGS 328 Manual de usuario

Sygonix

Sygonix 2483186 Manual de usuario

Perry

Perry 1GA 50917MET/P Manual de usuario

isweek

isweek AS8900 Manual de usuario

Oldham

Oldham OLC 10 Manual de usuario

Wizmart

Wizmart NB983 Manual de usuario

Beacon

Beacon MEGA Manual

RKI

RKI GX-6000 Manual de usuario

Dräger

Dräger PIR 7000 Manual de usuario

GDS

GDS GASMAX EC Manual de usuario