washloo Supreme Manual de usuario
Supreme
User Manual
Clean Comfort Hygiene
Table of Contents
1
Page Description Page Number
Safety Precautions 2
Product Overview 4
Description of parts 5
Operation 6
Installation Guide 13
Maintenance 16
Trouble Shooting 17
Technical Specifications 18
Warranty 19
User Information 20
2
Caution
May result in death or injury
Read all instructions before use.
Save these instructions for future reference.
Safety Precautions
Warning
May result in death or injury
‘Do Not’ Disassemble, attempt
to repair or alter the Washloo.
Any alterations should be carried out
by a qualified technician
Disassembly may result in
death or injury.
‘Do Not’ fully submerge the
Washloo into water.
‘Do not’ use the product in locations
exposed to excessive moisture and
do not splash water
onto the product
‘Do Not’ touch the plug with
wet hands.
This may cause a high risk of an
electric shock.
This Washloo is equipped with a
cord incorporating an earth wire
and an earthed plug.
Before connecting the Washloo
to the power supply, please
ensure the water supply is
connected first.
Washloos require a power
supply of 220-240V
‘Do Not’ loosen the plug
connecting wires.
Ensure the power cable is not
damaged or excessively bent prior to
use.
Exposed wires may result
in an electric shock
The plug must be inserted
into a power outlet that
has been correctly
installed
3
Safety Precautions
‘Do Not’ stretch or bend the
plastic water pipes supplying the
Washloo.
‘Do Not’ install or leave the
remote control near water.
‘Do Not’ expose the Washloo to
below freezing conditions.
The plastic water pipe supplying the
Washloo and also the internal water
system may get damaged, later
resulting in leaks.
For children and seniors who
have difficulties with adjusting
temperature.
‘Do Not’ place an electric heater
near the Washloo.
‘Do Not’ place any containers
filled with water, medicines,
‘Do Not’ stand on the Washloo
lid or seat.
‘Do Not’ force the Washloo cover
or seat downwards or upwards.
Any damage found
through misuse or
standing on the Washloo
will not be covered under
warranty.
This will damage the ‘soft
closing’ mechanism or the
physical product. Any
damage through misuse
will not be covered under
warranty.
This may result in leaks within
the water supply and
potentially damage the
Washloo.
‘Do Not’ submerge the remote
control in water as this will damage
the internal circuit boards.
Users with sensitive skin or impaired
heat sensitivity should set the
temperature of the wash spray, air
dryer and seat to `'low'' or `'off‘’.
‘Do Not’ dispose of any burning
materials such as cigarettes in the
toilet. This may result in fire or product
deformation.
food, metallic objects or flammable
materials on top of the Washloo. If
foreign objects enter the product,
this may result in electric shock or
fire.
4
Product Overview
Note : The above illustration is an example only, your version may vary
Remote Control
3 Pin Plug and RCD
Side Control
Heated Seat
Toilet Bowl
Cushion Damper
Toilet Lid
Damper/Seat Mechanism
Dryer Outlet
Nozzle
Side Control
Description of Parts
5
Note : The above illustration is an example only, your version may vary
Remote Control Holder to Wall Installation
•Clean Area prior to installation of Remote Control Holder.
•Press the tape down firmly and evenly and place on wall. Leave for
15 minutes prior to inserting the remote control
Battery Replacement
Remove backing cover of remote
control by sliding downwards.
Renew batteries (AAA Batteries or
insert for first use).
Ensure seal cover and batteries are
correctly positioned.
Remote Control Remote Control
Holder
AAA
Batteries
Remote
AAA
Batteries
Seal
Cover
Remote Control Holder
Install Tape on Backside of
Remote Control Holder
Stick Remote Control Holder
onto the Wall
Wall
Double Sided
Tape
Operation
Operation Introduction
Remote Control Side Knob
Note- Indicator panel and LED display may differ depending on specific model configuration.
The Washloo Supreme is designed to be controlled through the use of the Side Knob and the
displayed Remote Control.
‘First Time’ Use
1. Open the angle valve and supply the Washloo with water
(ensuring no leaks).
2. Connect the mains power supply to the Washloo and ensure the
indicator light on the RCD is powered on.
4. Now that the Washloo Supreme has power and water, the
default temperature settings for both seat and water temperature,
deodorization and auto flushing will be set. These settings can all
be adjusted using the remote control.
3. If the Supreme does not automatically power on, use the ‘Side
Knob button by pressing it in once. This will turn the Washloo on.
The indicator light panel on the remote control displays
the position and pressure levels selected by the user
6
Operation
Front Wash / Oscillating
When you are seated and press
this button, this activates the
feminine wash. The nozzle
comes out and sprays water on
the feminine area. Press this
button again and the nozzle will
move forwards and backwards.
Rear Wash / Oscillating
When you are seated and press
this button, this activates the
posterior wash. The nozzle
comes out and sprays water on
the users posterior area. Press
this button again and the
nozzle will move forwards and
backwards.
Nozzle position
Adjust nozzle position using forward
or backwards button according to
your preference and convenience
during washing. Please note that
during the ‘oscillation motion’ the
adjustment of the nozzle will not be
possible.
Dryer Position
When the Dryer Function is in use,
this will also adjust the Dryer position
to the users preference. Please note
that under the ‘movable’ dryer
mode, the dryer adjustment can not
be operated manually.
7
Stop
All currently operating functions will
stop by pressing this button. Press
and hold this button for 3 seconds
and ‘Standby Mode’ will be activated.
Water Pressure
While cleansing function is operating, press the
`Strong/Lady Care‘ to increase pressure and
‘Weak/Child Wash’ to decrease pressure. There are
4 pressure levels from ‘LOW’ to ‘HIGH.’
8
Operation
Dryer
Press this button to use the warm air drying
function (when warm air dryer is in operation the
deodorisation function will be turned off). Warm air
will continue to dry for 4 minutes until the user
leaves the seat or the ‘Stop’ operation selected.
Deodorizer
When not seated, pressing the deodorizer button
will turn on the automatic deodorization mode for 1
minute and 30 seconds. This will turn the
deodorizer on for 2 minutes. Holding the
Deodorizer button for 3 seconds will turn the
function off.
Night Light
Press this button to operate the
light on and off function. The light
on the remote control will flash
when the button is pressed and
held, indicating the light will be
switched on/off.
Nozzle Clean
By pressing the ‘Nozzle Clean’ button,
the Washloo will automatically begin
the Nozzle Cleaning process. Water will
flow out of the nozzle and clean the
peripheral areas around it. The nozzle
will also extend out allowing the user to
clean the remainder of the nozzle as
described within the ‘Maintenance’
section of the manual.
Child Wash
This function is designed for children.
Pressing this button activates the
below process;
1. Rear Wash (30 seconds)
2. Warm Air Dryer (2 minutes)
The water pressure is set to minimum
and water temperature is set to
MEDIUM 36°C. If the child's hips do
not reach the sensor area, the
function will still work.
One Solution
When you are seated and press this button, this
activates the process below;
1. Rear Wash (40 seconds)
2. Oscillating Wash (20 seconds)
3. Warm Air Dryer(2 minutes)
Tabla de contenidos
Otros manuales de Baño de washloo
Manuales populares de Baño de otras marcas
Better Bathrooms
Better Bathrooms BUN/BeBa 27555/78725 Manual de usuario
American Standard
American Standard CONCEPT Cube TF-2704 Manual de usuario
BIOLAN
BIOLAN ECO Manual de lista de piezas
Thetford
Thetford C260 Series Manual de usuario
KELISS
KELISS T162A Series Manual de usuario
Kohler
Kohler K-22241K Instrucciones de montaje
