wanscam AJ series Manual de usuario
IPCAM User Manual
1
Wireless/Wired Network Camera
Night Vision & Remote Operation
User Manual
IPCAM User Manual
2
Thank you for buying our IP camera.
This Series Products are designed and equipped for network video surveillance
system, including wired IP bullet camera, wireless IP bullet camera, IP IR dome
camera, IP IR waterproof camera etc. We adopt high performance chip to ensure high
quality media processor which processes audio and video collection, compression and
transmission. Standard MJPEG compression format ensures clear and streaming video
performance. It enables users to view via IE browser, centre management software
client software;
AJ series products are applicable for big, medium-sized and small enterprises, chain
store, factory, home and all kinds of spots where remote network video transmission
and control supposed to be installed, They are easy to install and operate. Before the
installation of the IP camera, please check if your product accessories in
the package are complete
Product Components and Features:
IP camera ---------------------------------------------------------------------------------1 PC
Bracket（optional）------------------------------------------------------------------- -1 PC
Power adapter ----------------------------------------------------------------------------1 PC
Warranty card-----------------------------------------------------------------------------1 PC
CD------------------------------------------------------------------------------------------1 PC
Table of CONTENTS
1. General Introduction ...........................................................................................4
1.1. Product Specifications ................................................................................. ...5
1.2. Applications ................................................................................................ ....5
1.3. System Requirements ......................................................................................5
2. Interface & Installation ................................................................................. .....6
2.1. Interface ..........................................................................................................7
2.2. Installation .......................................................................................................7
2.2.1. Installation in LAN .......................................................................................8
2.2.2. PPPoE Installation ........................................................................................8
2.2.3. IP Camera & PC connection ......................................................... ...............8
3. IE Browse to IP Camera..................................................................... ................9
3.1. Use Search tool Software............................................................................... .9
IPCAM User Manual
3
3.2. Logging and Active X Installation...................................................................13
3.3. Main Operation Interface.................................................................................14
3.4. Operator Operation ........................................................................................15
3.4.1. Multi-Device Settings....................................................................... ..........15
3.4.2. Basic Network Settings......................................................................... ......17
3.4.3. Wireless Settings................................................................. .......................18
3.4.4. ADSL Settings.............................................................................. ..............18
3.4.5. DDNS Settings.............................................................................................19
3.4.6. E-mail and FTP Services Settings................................................................19
3.4.7. Alarm Services Settings ..............................................................................20
3.4.8. Reset/Firmware Upgrade Settings...............................................................21
3.4.9. Restore Factory Settings .............................................................................21
3.4.10. Reboot Equipment Settings.........................................................................22
4. Others .................................................................................................................22
4.1. Port Forwarding Settings in Router.................................................................22
4.2 Warranty ..........................................................................................................23
IPCAM User Manual
4
General Introduction
IP Camera is a new generation product with the combination of analog camera &
IP video technology. Despite all functions which analog cameras have, IP camera can
compress and encrypt video and audio signal then send it to remote terminals through
internet with its built-in processor and web server. With its IP address, users can use
standard PC IE browser to visit IP camera, real time monitor targets, manage and store
video or image, PTZ control also is available through network.
As a new member in camera family, IP camera shares the same operation function
with the analog camera, such as, auto white balance, auto shutter speed, AGC, auto
backlight compensation etc. On the other hand, IP camera supports remote access
through internet, and support multi-user visit, some IP cameras are able to extend to
both analog and digital signal.
The core of AJ series IP cameras is 32Bit RSIC, adopts standard MJPEG
compression format, camera sensor is CMOS, support auto white balance and
backlight balance, support IE, cell phone browser，centralized monitor interface
management. In general, according to the function of audio simplex & duplex,
infrared, wired, wireless, POE, PZT, local storage, it has hundreds of products, to
meet requirements of high, middle, low ranks of users.
IPCAM User Manual
5
1.1. Product Specifications
*- Adopt high Performance, strong function media processor 32Bit RSIC
*- High sensor CMOS
*-Adopt optimized MJPEG video compression algorithm, realize high-definition images
transmission in narrow bandwidth;
*-Maximum support 15 users viewing at the same time, no limit for users if using
Forwarder
Server function;
*- Built in Web Server，it is convenient for users to use standard browse to realize the
real time monitoring and setting administration;
*-Support WIFI：802．11b/g wireless networking;
*-Support remote system update;
*-Support DDNS analysis, support LAN & Internet (ADSL、Cable Modem)
*-Support variety of network protocol: TCP/IP, UDP, SMTP, PPPoE, Dynamic DNS,
DNS Client, SNTP, BOOTP, DHCP, FTP, SNMP, WIFI/802. 11b/g
*-Parts of modes products support one/ two way audio talkback;
*-Support Motion Detection alarm function (set area & sensitivity);
*-Support image snap
*-Abnormal automatic recovery function，if Network Interruption can auto connection
*-Dynamic alarm function, set alarm period.
1.2. Applications
The series products usually are ideal for big department, supermarket, home,
factory, workshop etc.
1.3. System Requirements
Minimum Hardware Configuration
CPU: Pentium 1.6 GHz
IPCAM User Manual
6
Memory: 256MB
Audio card: need audio monitor, two way talkback essential
Hard Disk : if it need video image，no less favorable than 40G
Operation System: 32 bit simple/ English Windows2000、WindowsXP、
Windows2003、Windows Vista & 64 bit simple Chinese/English Windows2003、
Windows XP、Windows Vista etc.
Software environment
IE 5.0 or above version
DirectX8.0 or above version
TCP／IP network protocol
2. Interface & Installation
There are two kinds of AJ series IP camera interfaces: one is body guard interface,
the other is the extend line interface, set two representative products as examples, to
give explanation:
*Non-extended line IP Camera icon *Extended line IP Camera icon
2.1. Interface
*Non-extended line IP Camera Tailgate
IPCAM User Manual
7
Power Supply Light: constant on after power up
Network light: constant sparkle after power up data transmission.
Ethernet interface: RJ-45 interface.
I/O interface: 1 router alarm input, accept 3, 4 two terminals (input terminal grounding,
low level effective trigger); 1 router TTL control input, connect 1,2 two
terminals (1,2 terminals short connections).
Power input interface: connect direct current 5V Power
*Extension line interface definition icon:
Power: direct current 12V.
Reset line: two reset line short circuit, equipments restore to ex- factory standards.
Ethernet interface: RJ-45 network interface.
2.2. Installation
IP camera process image transmission on network through the use of Internet
Technology, it offers DDNS function for static IP, dynamic IP, PPPoE dialing users.
IP Camera can connect to outer net through LAN, also connect directly.3 networking
connecting ways are widely applied in IP Camera:
2.2.1. Installation in LAN.
IPCAM User Manual
8
This is the most popular network access way, as long as there is a router, internet
cable connect router directly to IP Camera, IP Camera can connect to Internet as
normal PC, as shows:
2.2.2. PPPoE Installation
Under the condition, users need set PPPoE dialing parameter on IP Camera:
input the username and password ISP supplier’ offer permit IP Camera dialing
connects to Internet. As to set the PPPoE dialing parameter, you can connect device to
network through the first way, then write parameter to the device, also through
following third way, direct process parameter written to device. The way how to set
PPPoE, please refer to 3.4.5.for detailed steps
2.2.3. IP Camera & PC connection
This method is not used too often, when you process machine write parameter or
program shift, we recommend you adopt the first connect network way, to process the
modification of machine parameter.
IPCAM User Manual
9
connect to IP camera (note: don’t apply for wrong power), after one minute
modification of IP camera, video could be connected by internet cable to IP camera;
under the normal condition, yellow light is on, green light flickers, now physical
connection of IP camera finish at this time (in order to connect successfully, we
advise to set camera IP as the stable IP at the same net range of PC in LAN , how to
set, please refer to 8 frequent questions answer).
3. IE Browse to IP Camera
After IP camera connects to PC LAN through router, you can operate on IP
camera via PC, first please run the relative software in the CD kit
3.1. Use Search tool Software
Open the disk and run the CD ( Attached with the IP camera ), then appear the
following information:
Figure 3.1
Double click icon (the IP Finder software),Then appear the following
interface:
IPCAM User Manual
10
Figure 3.2
If network cable and power supply are correctly connected, device type, name and
IP address will be shown in the Equipments list (Otherwise, please confirm whether
power supply and network cable work normally).
In the interface above, the configuration information of the current computer is
listed on the left side; and the network configuration information of the selected device is
listed on the right side. Default IP address of the IP camera is 192.168.1.99, and HTTP
port is 99.
Note: The IP address and the HTTP Port of the IP camera can be changed to as your wanted..
Inner Access refers to the LAN access address; Outer Access refers the WAN access
address.
Tips: Port forwarding setting is necessary for outer access, please
refer to ‘Port forwarding Settings ’in 4.1 section.
Otros manuales para AJ series
9
Tabla de contenidos
Otros manuales de Cámara IP de wanscam
wanscam
wanscam HW Series Manual de usuario
wanscam
wanscam AJ series Manual de usuario
wanscam
wanscam JW0009 Manual de usuario
wanscam
wanscam AJ Seris Manual de usuario
wanscam
wanscam AJ series Manual de usuario
wanscam
wanscam HW0036 Manual de usuario
wanscam
wanscam HW Series Manual de usuario
wanscam
wanscam AJ series Manual de usuario
wanscam
wanscam HW0029 Manual de usuario
wanscam
wanscam M-Jpeg Series Manual de usuario
