Wahl Blitz Manual de usuario
1
Blitz Trimmer
Blitz Trimmer
Instructions
2
Blitz Trimmer
CONTENTS
IMPORTANT SAFEGUARDS Page 3
OPERATING INSTRUCTIONS Page 5
TIPS FOR SUCCESSFUL STYLING Page 8
CLEANING AND MAINTENANCE Page 13
WIRING Page 15
PRODUCT REGISTRATION Page 15
GUARANTEE Page 17
Please read all instructions carefully to familiarise yourself
with your new Wahl trimmer before using.
Save these instructions for further reference.
For any further assistance or information call Customer Services on
T: 01227 740066
or visit
W: www.wahl.co.uk
E: customer[email protected]
3
Blitz Trimmer
Please retain this leaet for future reference.
READ ALL INSTRUCTIONS BEFORE USING.
IMPORTANT SAFEGUARDS
When using your electrical appliance, basic safety
precautions should always be followed, including
the following:
1.This appliance can be used by children
from aged 14 years and above and
persons with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge, if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved. Children shall not
play with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
2.Switch off the appliance and unplug from
outlet when not in use, before putting on
or taking off attachments and also before
cleaning the appliance.
3.Never use your appliance without paying
attention! Except when charging always
4
Blitz Trimmer
unplug this appliance from the electricity
outlet immediately after using.
4.Do not operate the appliance with a
broken cord, plug or charger, or if the
appliance malfunctions, or is dropped
or damaged in anyway.
5.Do not wrap the cord around the appliance.
6.Any servicing or repair must be performed
by an authorised service representative.
7.Do not use outdoors or in damp areas.
8.The use of attachments that are not
supplied by the manufacturer may cause
re, electric shock or injury and damage to
the appliance.
9.To protect against risk of electrical shock,
never immerse the unit or let it come into
contact with water or any other liquids.
Do not use the unit with wet hands. If the
appliance should become wet, damp or fall
in water, remove plug from mains socket
immediately. Do not put your hands in the
water. Do not take into bathroom.
10.Never carry the unit by its power cord.
11.Do not drop or insert any object into any
opening.
12.Use this appliance only for its intended
purpose.
5
Blitz Trimmer
13.Exhausted batteries/ rechargeable
batteries should not be disposed of in the
household waste. Dispose of them in a
completely discharged state in accordance
with local legal regulations. Do not throw into
re where heat could cause them to rupture.
WARNING: KEEP THE APPLIANCE DRY
TRAVEL PLUG
REMOVE BEFORE USE!
The travel plug is used to prevent the trimmer from accidentally powering
on when traveling. When travel plug is engaged, the power button will not
function.
OPERATING INSTRUCTIONS
Recharging your Lithium Ion Trimmer
1.This trimmer is conveniently designed for household use. It should be
allowed to charge 1 hour before rst use.
2.Remove the trimmer, transformer and accessories from packing material.
3.Connect the transformer to the trimmer. BE SURE THE TRIMMER IS IN
THE OFF POSITION WHEN CHARGING.
4.Plug the transformer into any convenient electrical outlet at the correct voltage.
5.When the trimmer is low in power, it should be connected to the
transformer and plugged into an outlet to assure maximum power is availa-
ble when it is next used. This transformer is designed to completely charge
the battery without over charging.
6.The battery will take approximately 60 minutes to charge. The lithium
ion trimmer also has a quick charge capability, 1 minute quick charge for
over 3 minutes use.
6
Blitz Trimmer
7.Lithium Ion battery life may be extended with the following procedure:
•Only charge the device when charging is required. A charge is
required when the product begins to slow down or has trouble
maintaining speed while performing its intended function.
•If the device is fully discharged, apply a charge right away to
prevent damage or inability to recharge.
•A partial charge is ne; Li-Ion does not require a full charge.
•Charge the device at moderate temperatures. Do not charge below
freezing.
•Do not leave the device connected to the charger, when it is
not plugged into an outlet.
NOTE: It is okay to leave the device in its stand for storage if the stand
allows for the charger to be disconnected from the stand or product.
•Perform regular maintenance on the device including keeping the
blades oiled, clean, and free of debris to prevent taxing the battery and
motor.
•When not in use, store the partially charged device in a cool and
dry place away from heat sources and direct sunlight ( 25°C
ambient or less recommended)
WARNING: ONLY USE THE TRANSFORMER SUPPLIED WITH THE
TRIMMER.
TROUBLESHOOTING
If your trimmer does not seem to take a charge, check the following before
returning it for repair:
1.Check outlet to make sure it is working by plugging in another appliance.
2.Be sure the trimmer is properly connected to the recharging transformer, all
the connections are secure and the switch on the trimmer is turned OFF.
3.If your electricity is connected to a master power switch, we suggest the
trimmer be disconnected from the charger anytime the master switch is off.
7
Blitz Trimmer
Leaving the unit plugged into a dead outlet or an unplugged charger will
drain the battery.
4.If the trimmer does not run and it is completely charged, turn the unit ON
and pinch or push the blades manually. Oil may have dried out between the
blades, so they may be temporarily stuck together.
● If the LED did not ash before the trimmer stopped running, try resetting
by re-charging completely until the LED shuts off.
● Trimming is disabled when charging or if the disabling plug is inserted.
● If the trimmer is fully charged the LED may remain OFF if plugged into
the charger.
● If the trimmer unexpectedly stops operating try resetting the device by
plugging the trimmer into the charger.
● If the LED ashes following a full charge or when not expected, the
trimmer may need to be reset. Re-charge the trimmer and check to see
if the LED is still ashing. If it is, let the trimmer run until fully discharged
and do a full re charge.
BATTERY REMOVAL AND DISPOSAL
Under normal use, the rechargeable battery in your trimmer will last from
three to ve years. If a replacement battery should be necessary, do not
attempt to replace the battery yourself. (See page 16 for details)
DETACHABLE HEADS:
A detachable head system enables you to quickly change from a shaver to
a precision trimmer to trim moustache, goatee, or anywhere. To remove
attachment, simply pull top edge of blade away from body unit. To attach,
align back tab of attachment head to cavity on the inner edge of trimmer unit
and push down on top of blade.
8
Blitz Trimmer
Should blades become damaged or dull or if you want additional attachment
heads for your trimmer, you may purchase them from Wahl. Be sure to ask
for the following attachment with part number from our service and repair
department (see last page for contact information):
Attachment Head: Wahl Part Number
Trimmer: 59300-800
Detailer: 59301
T-Blade: 2144-102
Dual Shaver: 59303
Rotary: 58067-100
Detail Shaver: 59307
Rotary Shaver: 7196-001
Body Shaver: 92020-100
The trimmer you purchased may not have all of these heads, but they
will all work with your trimmer if you wish to purchase them.
PRO TIPS
1. Hair cuts best with an electric trimmer/shaver when it is clean and dry. For
best results, do not use with wet or damp hair.
2. It can take up to 30 days of regular use to train your hair to a new shaving
system. Some irritation may occur during this time. Stick with it. Your hair
and skin will adjust, and you will get a great shave.
3. Replace the foil head and cutter bars as needed, depending on how often
you shave.
4. Be sure to clean the shaver, cutter bar and foil after every three or four
shaves.
SHAVING PROCEDURES FOR FAST, CLOSE SHAVES
92020-100
7196-001
59307
59301 59303
58067-10059300-800 2144-102
9
Blitz Trimmer
For maximum speed and efciency, hold the shaver so that
both screens are in contact with the skin. When shaving the
upper lip or neck, hold shaver so that the uppermost screen
is in contact with skin. Shave both with and against the
grain of the beard, and stretch the skin taut in the path of
the shaver. Guide the dual foil heads gently back and forth,
primarily against the grain of the beard.
Do not press screen heads hard against face. Heavy scrubbing action with
the shaver could damage the foil and will not result in a closer shave.
Always replace the Foil Guard to protect the delicate dual foil heads when
shaver is off. To ensure continued shaving satisfaction, you should replace
the foils and cutter bar periodically.
SHAVING HEAVY BEARD GROWTH
Begin shaving in a less dense area of the beard. Move the shaver in a
circular motion on a small area of the face (this picks up the hairs that grow in
all directions). When you see that this small area is shaved clean, gradually
move into a new area while still using the circular motion. Continue this
motion, one small section at a time, until entire face is shaved.
Using guide combs:
To attach guide combs, hold comb with the teeth up. Snap
guide comb attachment rmly to the bottom of the trimmer
blade.
SHORT ROUNDED GUIDE COMBS:
TRIMMING WITH GUIDE COMBS:
These attachments are ideal for blending, tapering and dening beards, as
well as for achieving a “close trim” stubble look around the face. To use the
attachments, go with the hair direction. To achieve closer looks, go against
the hair direction.
1/2 1 2 3
10
Blitz Trimmer
HAIR & LONGER BEARD GUIDE COMBS:
NECKLINES AND SIDEBURNS USING TRIMMER HEAD
Detach shaver head as described earlier. Attach trimmer
blade as described earlier. Slowly move trimmer
downward on desired areas to neatly trim and shape.
TRIMMING AND EDGING YOUR BEARD
The following are suggested trimming steps and trimmer
positions. You may nd different procedures work better
for you.
1. Comb your beard in the direction that it grows to help
reveal stray hairs that may be longer than the others.
2. Attach a guide to trim and taper your beard. Begin with
a guide of a long trimming length. Trim toward your chin
in smooth, overlapping strokes, following the lay of your
beard. If you trim against the way your beard naturally
lays, the trimmer will cut the hair much shorter.
Change the trimming guides to progressively shorter
lengths until you reach the desired length of beard. You
may wish to trim closer near the ear and down under the
chin, changing to a longer guide toward the front of the
face and point of your chin.
3. To cut the outline of your beard, remove the trimming guide. Starting under
your chin and working back toward your jawbone and ears, cut the outer
perimeter of your beard underneath the jawbone. Continue the line all the
way up to the ears and hairline.
4. Accentuate your beard line by using the trimmer in a downward motion.
1 3 5 7
2 4 6 8
Tabla de contenidos
Otros manuales de Recortadora de Wahl
Wahl
Wahl Lithium-Ion 9854L Manual de usuario
Wahl
Wahl Trimmer Manual de usuario
Wahl
Wahl Lithium Ion Triple Play 9880 Manual de usuario
Wahl
Wahl 8171L Manual de usuario
Wahl
Wahl 05640-100 Manual de usuario
Wahl
Wahl 2200 Manual de usuario
Wahl
Wahl EXTREME GRIP PRO Manual de usuario
Wahl
Wahl 5640-1017 Manual de usuario
Wahl
Wahl WAL9995-517 Dimensiones
Wahl
Wahl 1080.1010 Manual de usuario
Wahl
Wahl Ear, Nose & Brow Manual de usuario
Wahl
Wahl Vario Manual de usuario
Wahl
Wahl 73509 Manual de usuario
Wahl
Wahl 9854 Manual de usuario
Wahl
Wahl MINI ARCO Instrucciones de instalación
Wahl
Wahl Lithium-Ion 9860L Manual de usuario
Wahl
Wahl 3205 Manual de usuario
Wahl
Wahl Deluxe Pocket Pro Manual de usuario
Wahl
Wahl Pocket Pro Manual de usuario
Wahl
Wahl MINI PRO Manual de usuario
