WAGNER AquaCoat 5010 Manual operacional

B_05900

AirCoat Spraying System

for

Non-ammable Liquids

Version 02/2016

Translation of the Original

Operating Manual

Manual

GM 5020EACW

High pressure

OPERATING MANUAL

EDITION 02/2016 ORDER NUMBER DOC 2366600

Table of Contents

1 ABOUT THESE INSTRUCTIONS 7

1.1 Preface 7

1.2 Warnings, Notices and Symbols in these Instructions 7

1.3 Languages 8

1.3.1 Operating Manuals for the Individual Components 8

1.4 Abbreviations 9

1.5 Terminology for the Purpose of this Manual 9

2 CORRECT USE 10

2.1 Device Type 10

2.2 Type of Use 10

2.3 Use in an Explosion Hazard Area 10

2.4 Safety Parameters 10

2.5 Processible Working Materials 11

2.6 Reasonably Foreseeable Misuse 12

2.7 Residual Risks 12

3 IDENTIFICATION 13

3.1 CE Identication 13

3.2 Type Plates 13

3.3 Safety Signage 14

4 GENERAL SAFETY INSTRUCTIONS 15

4.1 Safety Instructions for the Operator 15

4.1.1 Electrical Equipment 15

4.1.2 Personnel Qualications 15

4.1.3 Safe Work Environment 15

4.2 Safety Instructions for Sta 16

4.2.1 Safe Handling of WAGNER Spray Devices 16

4.2.2 Grounding the Device 17

4.2.3 Product Hoses 17

4.2.4 Cleaning and Flushing 18

4.2.5 Handling Hazardous Liquids, Varnishes and Paints 19

4.2.6 Touching Hot Surfaces 19

4.3 Protective and Monitoring Equipment 19

4.4 Safety-Relevant Information about Discharges 19

5 DESCRIPTION 20

5.1 Components 20

5.2 Mode of Operation 23

5.3 Protective and Monitoring Equipment 24

5.4 Scope of Delivery 26

5.4.1 Basic Sets 27

5.5 Technical Data 28

5.5.1 VM 5020W Control Unit 29

5.5.2 Product Pressure Generator 29

5.5.3 GM 5020EACW Spray Gun 30

5.5.4 Electric Block Diagram, AquaCoat 31

OPERATING MANUAL

EDITION 02/2016 ORDER NUMBER DOC 2366600

Table of Contents

5.6 Controls 32

5.6.1 VM 5020W Control Unit 32

5.6.1.1 Operating Elements, Front Side 32

5.6.1.2 Connections on the Rear Side 35

5.6.2 Product Pressure Generator 36

5.6.2.1 Puma 28-40 PE+TG Pneumatic Piston Pump 36

5.6.2.2 Cobra 40-10 Double Diaphragm Pump 37

5.6.2.3 EvoMotion 20-30 Piston Pump 38

5.6.2.4 Working in Accordance with Pump's Operating Manual 38

5.6.3 GM 5020EACW Spray Gun 39

5.6.3.1 Securing the Spray Gun Against Actuation 40

5.6.3.2 Functioning of the Spray Gun 40

5.6.3.3 Spraying Procedure for AirCoat Round Spray 42

5.6.3.4 Spraying Procedure for AirCoat Fan Spray 42

5.6.3.5 Electrostatic Eect 43

6 ASSEMBLY AND COMMISSIONING 44

6.1 Training Assembly/Commissioning Sta 44

6.2 Storage Conditions 44

6.3 Installation Conditions 44

6.4 Transportation 45

6.5 Assembly and Installation 45

6.5.1 Assembling the AquaCoat System 46

6.5.2 Ventilation of the Spray Booth 48

6.5.3 Air Supply 48

6.5.4 Product Supply 49

6.6 Grounding 50

6.7 Safety Checks 52

6.8 Preparation of Water-Based Lacquer 52

6.8.1 Viscosity Conversion Table 52

6.9 Commissioning 53

6.9.1 Safety Instructions 53

6.9.2 Preparation 53

6.9.3 Commissioning 54

6.9.3.1 AquaCoat with Puma 28-40 or EvoMotion 20-30 54

6.9.3.2 AquaCoat with Cobra 40-10 Double Diaphragm Pump 56

6.9.4 Verifying a Safe Operational Condition 57

7 OPERATION 58

7.1 Training the Operating Sta 58

7.2 Safety Instructions 58

7.2.1 Emergency Deactivation for Puma 59

7.2.2 Emergency Deactivation for Cobra 60

7.2.3 Emergency Deactivation for EvoMotion 61

7.2.4 General Rules for Making Adjustments to the Spray Gun 62

7.2.4.1 Electrical Discharge 63

OPERATING MANUAL

EDITION 02/2016 ORDER NUMBER DOC 2366600

7.3 Working 64

7.3.1 Checking the Spray Pattern (Without Electrostatics) 64

7.3.2 Starting the System 66

7.3.3 Spraying 67

7.3.4 Pressure Relief/Work Interruption 68

7.3.5 Flushing Out Clogged Round Jet Nozzles 69

7.3.6 Replacing Round Jet Nozzle's Nozzle Insert 69

7.3.7 Changing from AirCoat Round Jet to AirCoat Flat Jet 70

7.3.8 Replacing the AirCoat Flat Jet Nozzles 73

7.3.9 Cleaning of the Nozzle Parts 73

7.3.10 Eliminate Nozzle Clogging 74

7.3.11 VM 5020W Control Unit Start Up 76

7.3.12 Setting and Saving Recipes 77

7.3.13 Setting the High Voltage 78

7.3.14 Setting the Current Limitation 79

7.3.15 Display During Spraying 80

7.3.16 Standby Mode 81

7.3.17 Operating Hours Counter/Service Display 82

7.3.18 Service Display Setup 83

7.3.19 "Carry Out Service" Display 84

7.4 Device Conguration 85

7.4.1 Overview of Parameters 85

7.4.2 Access to the Device Conguration Mode 86

7.4.3 Setting Example "Parameter C13" 87

7.5 External Interface 89

8 CLEANING AND MAINTENANCE 91

8.1 Cleaning 91

8.1.1 Cleaning Sta 91

8.1.2 Safety Instructions 91

8.1.3 Flushing and Cleaning the System 92

8.2 Maintenance 94

8.2.1 Maintenance Sta 94

8.2.2 Safety Instructions 94

8.2.3 Safety Checks 95

8.2.3.1 Grounding Check 95

8.2.3.2 Inspecting the Safety Elements 95

8.2.3.3 Product Hoses, Tubes and Couplings 96

8.2.4 Changing the Spray Gun With Hose Set 97

8.2.5 Changing the Product Hose and/or Air Hose 98

8.2.6 Cleaning and Replacing the Filter 98

9 TROUBLESHOOTING AND RECTIFICATION 99

9.1 Error Displays at the VM 5020W Control Unit 99

9.2 Faults in the System 101

10 REPAIR WORK 102

10.1 Repair Personnel 102

10.2 Safety Instructions 102

10.3 Mounting Materials 103

Table of Contents

OPERATING MANUAL

EDITION 02/2016 ORDER NUMBER DOC 2366600

10.4 Spray Gun 103

10.4.1 Tools 103

10.4.2 Disassembly of the Spray Gun 104

10.4.3 Cleaning the Parts After Disassembly 107

10.4.4 Assembling the Spray Gun 108

10.5 Disassembling VM 5020W Control Unit 114

10.6 Opening the Control Unit 114

11 FUNCTION TEST AFTER THE REPAIR 115

11.1 Function Tests for Spray Gun 117

11.1.1 Air Test 117

11.1.2 Product Pressure Test 117

11.1.3 Test of Spray Pattern 117

12 DISPOSAL 118

13 ACCESSORIES 119

13.1 Round Spray Nozzles 119

13.1.1 AirCoat Round Jet Nozzle Inserts 119

13.2 ACF Air Caps (Flat Jet) 119

13.2.1 ACF5000 AirCoat Flat Jet Nozzles 120

13.3 Hoses and Gun Cables 122

13.4 Miscellaneous 124

14 SPARE PARTS 126

14.1 How Can Spare Parts Be Ordered? 126

14.2 AquaCoat Basic device 127

14.2.1 VM 5020W Control Unit 132

14.3 Pump Sets 138

14.3.1 Puma 28-40 Set for AquaCoat 138

14.3.2 Cobra 40-10 Set for AquaCoat 140

14.3.3 EvoMotion 20-30 Set for AquaCoat 142

14.3.3.1 Distributor for EvoMotion 143

14.3.4 Relief Combination, 270 bar 144

14.3.5 Angled Inline Filter, 530 bar 145

14.4 GM 5020EACW Spray Gun 146

14.4.1 GM 5020EACW Adapter 148

14.4.2 GM 5000EAC Handle 150

14.5 Accessories Spare Parts Lists 152

14.5.1 Fan Spray Nozzles 152

14.5.2 ACR5000 Round Jet Nozzle Adapter 152

14.5.3 Underframe with Rolls 153

14.5.4 Hose Holder 154

14.5.5 Gun Holder 154

14.5.6 Level Monitor With Alarm Horn 155

14.5.7 D350 Drum Cover 156

15 WARRANTY AND CONFORMITY DECLARATIONS 157

15.1 Important Notes Regarding Product Liability 157

15.2 Warranty Claim 157

15.3 CE Declaration of Conformity 158

15.4 Notes on National Regulations and Guidelines 158

Table of Contents

OPERATING MANUAL

EDITION 02/2016 ORDER NUMBER DOC 2366600

1 ABOUT THESE INSTRUCTIONS

The operating manual contains information about safely operating, maintaining, cleaning

and repairing the device.

The operating manual is part of the device and must be available to the operating and

service personnel.

The device may only be operated by trained personnel and in compliance with this

operating manual. Operating and service personnel should be instructed according to the

safety instructions.

This equipment can be dangerous if it is not operated according to the instructions in this

operating manual.

1.1 PREFACE

1.2 WARNINGS, NOTICES AND SYMBOLS IN THESE INSTRUCTIONS

Warning instructions in this operating manual highlight particular dangers to users and to

the device and state measures for avoiding the hazard. These warning instructions fall into

the following categories:

Danger - immediate risk of danger.

Non-observance will result in death or serious injury.

Warning - possible imminent danger.

Non-observance may result in death or serious injury.

Caution - a possibly hazardous situation.

Non-observance may result in minor injury.

Notice - a possibly hazardous situation.

Non-observance may result in damage to property.

Note - provides information about particular characteristics and how to proceed.

This notice warns you of a hazard!

Possible consequences of not observing the warning instructions.

The signal word indicates the hazard level.

The measures for preventing the danger and its consequences.

DANGER

This notice warns you of a hazard!

Possible consequences of not observing the warning instructions.

The signal word indicates the hazard level.

The measures for preventing the danger and its consequences.

WARNING

This notice warns you of a hazard!

Possible consequences of not observing the warning instructions.

The signal word indicates the hazard level.

The measures for preventing the danger and its consequences.

CAUTION

This notice warns you of a hazard!

Possible consequences of not observing the warning instructions. The signal word

indicates the hazard level.

The measures for preventing the danger and its consequences.

NOTICE

OPERATING MANUAL

EDITION 02/2016 ORDER NUMBER DOC 2366600

1.3 LANGUAGES

The AquaCoat GM 5020EACW operating manual is available in the following languages:

Language Order No. Language Order No.

German 2363958 English 2366600

French 2366598 Italian 2366601

Spanish 2366599

1.3.1 OPERATING MANUALS FOR THE INDIVIDUAL COMPONENTS

Puma 28-40 PE+TG piston pump operating manual

Language Order No. Language Order No.

German 2333537 English 2333538

French 2333539 Italian 2333540

Spanish 2333541

AquaCoat compressed air connection for Puma: Refer to Chapter 5.6.2.1.

Double diaphragm pump Cobra 40-10 operating manual

Language Order No. Language Order No.

German 2340850 English 2340851

French 2340852 Italian 2340853

Spanish 2340854

AquaCoat compressed air connection for Cobra: Refer to Chapter 5.6.2.2.

Additional languages on request or at:

EvoMotion 20-30 piston pump operating manual

Language Order No. Language Order No.

German 2333552 English 2333553

French 2333554 Italian 2333555

Spanish 2333556

AquaCoat compressed air connection for EvoMotion: Refer to Chapter 5.6.2.3.

OPERATING MANUAL

EDITION 02/2016 ORDER NUMBER DOC 2366600

1.5 TERMINOLOGY FOR THE PURPOSE OF THIS MANUAL

Cleaning Manual cleaning of devices and device parts with cleaning agent

Flushing Internal ushing of paint-wetted parts with ushing agent

Sta qualications

Trained person Is instructed in the tasks assigned to him/her, the potential risks

associated with improper behavior as well as the necessary

protective devices and measures.

Electrically trained

person

Is instructed by an electrician about the tasks assigned to him/her,

the potential risks associated with improper behavior as well as

the necessary protective devices and measures.

Electrician Can assess the work assigned to him/her and detect possible

hazards based on his/her technical training, knowledge and

experience in relevant provisions.

Skilled person A person who, based on his/her technical training, experience and

recent vocational experience, has sucient technical knowledge

and is familiar with the relevant and generally accepted rules of

technology so that he/she can inspect and assess the status of

devices and coating systems based on workplace safety.

In the context of

TRBS1203

(2010 / Revision 2012)

Additional requirements for skilled persons are given in the

TRBS1203(2010/Revision 2012): Expert knowledge in the areas

of protection against excessive pressure, electrical hazards, and

explosion protection (where applicable).

1.4 ABBREVIATIONS

Order No. Order number

Spare part

Marking in the spare parts lists

AirCoat

AirCoat electrostatic, water-based

Manual gun

High voltage

HP High pressure

Stainless steel

Ultra high molecular weight polyethylene

PTFE with graphite

Position

Number of pieces

Wrench size

LV Low viscosity

HV High viscosity

OPERATING MANUAL

EDITION 02/2016 ORDER NUMBER DOC 2366600

2 CORRECT USE

2.1 DEVICE TYPE

Electrostatic spraying unit for manual coating of grounded work pieces using the AirCoat

process.

AquaCoat 5010/5020 systems are equipped with the AquaCoat 5010/5020 cabinet, the

VM 5020W control unit, a GM 5020EACW AirCoat spray gun and matching hose set, a

high-voltage generator, all safety devices and one of the following spray product supplies:

- Piston pump, Puma 28-40 PE/TG (in accordance with the spare parts catalog)

- Double diaphragm pump, Cobra 40-10 (in accordance with the spare parts catalog)

- Piston pump, EvoMotion 20-30 (in accordance with the spare parts catalog)

2.2 TYPE OF USE

2.3 USE IN AN EXPLOSION HAZARD AREA

The device is not suitable for use in potentially explosive areas.

(See Chapter 3.1 "CE Identication".)

WAGNER accepts no liability for any damage arising from incorrect use.

Use the device only to work with the products recommended by WAGNER.

Only operate the device as a whole.

Do not deactivate safety xtures.

Use only WAGNER original spare parts and accessories.

AquaCoat 5010/5020 GM 5020EACW can be used to spray liquid, non-ammable products,

in particular non-ammable coating products in accordance with Chapter 2.5.

WAGNER forbids any other use!

The system may only be used as described in this operating manual. In particular, no

conversions are permitted on the system otherwise the warranty ceases to apply and

WAGNER is not liable for any claims.

2.4 SAFETY PARAMETERS

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Pistola pulverizadora de pintura de WAGNER

WAGNER

WAGNER The Painting People Manual de usuario

WAGNER

WAGNER WallPerfect Flexio 580 I-Spray Manual de usuario

WAGNER

WAGNER AG-14 Manual de usuario

WAGNER

WAGNER W 650 Manual de usuario

WAGNER

WAGNER Control Stainer 350 Manual de usuario

WAGNER

WAGNER Renuvo Manual de usuario

WAGNER

WAGNER W450 SE Manual de usuario

WAGNER

WAGNER GM 2800EA Manual de usuario

WAGNER

WAGNER Plast Coat 430 Manual de usuario

WAGNER

WAGNER PLAST COAT HP 30 Manual de usuario

WAGNER

WAGNER FineCoat Split-Gun Manual de usuario

WAGNER

WAGNER WOOD&METAL EXTRA GRAVITY FEED Manual de usuario

WAGNER

WAGNER AC 4500 PROFESSIONAL Guía rápida

WAGNER

WAGNER Super Finish 23 PLUS Manual de usuario

WAGNER

WAGNER Flexio 575 Manual de usuario

WAGNER

WAGNER Control Stainer 150 Manual de usuario

WAGNER

WAGNER Paint Crew 770 Manual de usuario

WAGNER

WAGNER Basic 8000 Manual operacional

WAGNER

WAGNER WallPerfect Flexio 867 Manual de usuario

WAGNER

WAGNER COLORCATALOG 2006 ENGLISH Manual de usuario

WAGNER

WAGNER Paint Crew Manual de usuario

WAGNER

WAGNER W 600 FLEXIO 18V Manual de usuario

WAGNER

WAGNER W 140 P Guía de configuración

WAGNER

WAGNER ProSpray 30 Manual de usuario

Manuales populares de Pistola pulverizadora de pintura de otras marcas

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Manual de usuario

Graco

Graco 246737 Manual de uso y cuidado

Binks

Binks SV100 Manual de usuario

Fimco

Fimco LG-4-3-1 Manual de usuario

AG SPRAY

AG SPRAY FS-ATV-25BL Manual de usuario

Nordson

Nordson MicroMax 2 Manual de usuario

Bonide

Bonide 051 Manual de operación

zogics

zogics Z-DAS Manual de usuario

KISANKRAFT

KISANKRAFT KK-KBS-165 Manual de usuario

Matrix

Matrix SG 650 Manual de usuario

Anest Iwata

Anest Iwata SGA-3 Guía de inicio rápido

paasche

paasche VV Hoja de datos

Carlisle

Carlisle DeVilbiss JGA-510 Manual de usuario

Gardena

Gardena 11120 Manual de usuario

Conrad

Conrad Hobby Airbrush K3 Manual de usuario

wiwa

wiwa 14025 R/F Manual de usuario

Graco

Graco EM 390 Manual de operación

DeVilbiss

DeVilbiss LUNA2i Manual de usuario