VS Sassoon VSM743TA Instrucciones de montaje

TOOL TIPS

THEHOMECUT

for the clipping kit

for easy at-home hair cutting.

VSM743TA

HEY YOU!

TAKE A BOW FINE SIR.

THINGS ARE LOOKING UP

& YOU’VE JUST MADE A

QUALITY PURCHASE

WITH THIS NEW GROOMING TOOL.

WE KNOW YOU’VE GOT THIS, BUT BEFORE YOU JUMP INTO

USING YOUR NEW SIDE KICK, HERE’S A FEW TIPS & TRICKS

TO KNOW BEFORE LETTING YOUR CREATIVITY RUN LOOSE.

HIT UP VSFORMEN.COM.AU FOR MORE GROOMING & INSPIRATION

OR FOLLOW US ONLINE

  

THE HOME CUT / TOOL TIPS

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially when children are present, basic

safety instructions should always be followed, including the following:

Polythene bags over product or package may be dangerous. To avoid danger of

suffocation, keep this wrapper away from babies and children. This bag is not

a toy.

DANGER: When the unit is used in a bathroom, unplug it after use

since the proximity of water presents a hazard even when the

appliance is switched off

WARNING: Keep the appliance dry, unless it otherwise specified. Do not use

this appliance in or near bathtubs, showers, basins or other vessels containing

water.

- Do not immerse appliance in water or other liquids.

- Do not reach for an appliance that has fallen into water. Unplug immediately.

- Take care to avoid contact between the moving blades of the unit and the

skin, paying particular attention to the face, neck and hands.

- This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the

appliance.

THE HOME CUT / TOOL TIPS

IMPORTANT: Always unplug the appliance when not in use or before cleaning.

Do not leave unattended when plugged in or switched on. Do not place on any

heat sensitive surface.

- Do not use any attachments other than those supplied by Conair Australia

Pty Ltd.

- Use this appliance only for its intended use as described within this

instruction booklet.

- This appliance is not intended for commercial use.

- Never drop or insert any object into an opening.

- Do not use the appliance with damaged or broken attachment combs or with

any teeth missing from the blades, as injury may occur.

- Do not place on any surface while it is operating.

- Keep the cord away from heated surfaces

- Never twist or pull on the power cord.

- Do not use an extension cord with this appliance.

- After use do not wrap the cord around the appliance as in time this may cause

the cord to fracture. Coil cord loosely by the side of the appliance in storage.

- Do not use outdoors or operate where aerosol (spray) products are being

used or where oxygen is being administered.

- Do not use the appliance if it is damaged. In the event of damage, discontinue

use immediately and contact your dealer for instructions on returning it for

examination or exchange. If the supply cord is damaged, it must be replaced

by the manufacturer, its service agent or similarly qualified person in order

to avoid a hazard.

- Always ensure that the voltage to be used corresponds to the voltage marked

on the unit.

1. Diamond sharpened

blades

2. Mains powered

3. 45mm clipping blade

4. 6 cutting comb guides

- grades #1, #2, #3,

#4, #5, & #6 comb

guides (3mm to 19mm)

for cutting, shaping

& fading

5. Barber comb

6. Blade guard

7. Cleaning brush

8. Oil

THE HOME CUT

BRAVO. YOU’VE MADE A QUALITY PURCHASE.

The Home Cut is the clipping kit for easy at-home hair cutting.

8 7

THE HOME CUT / TOOL TIPS

PREPPING YOUR

NEW TOOL

MAINS OPERATION

- A plastic cover has been placed over the plug to protect it from damage.

Remove the plastic cover before inserting into suitable power outlet. Ensure

your new clipper is switched off before plugging into a power outlet.

- Plug your new clipper into a suitable power outlet and switch the product on

by sliding the on/off switch to the ‘on’ position.

ADJUSTING THE POWER SCREW

The power screw allows you to adjust the power of your clipper.

To adjust the power screw - take a screwdriver or coin - turn the power

Screw counter clockwise until the arm strikes the

coil, making a clacking noise (Fig.1).

Then, turn the screw clockwise, until the noise stops and then turn

about 45 degrees more. This is the maximum power setting (Fig.2).

Fig. 4

Fig. 3

Fig. 5

Fig. 4

Fig. 3

Fig. 5

Fig.1 Fig.2

THE HOME CUT / TOOL TIPS

OILING THE BLADES

To get the sharpest, most precise cut, it is highly recommended to oil the blades

before each use.

Using the oil supplied with your new clipper, unscrew the cap & cut off the very

end of the plastic tube with a pair of scissors to release the oil.

Plug your clipper into a suitable power outlet and switch on. Gently squeeze the

oil tube & apply 2 drops of oil onto the blades. Leave the clipper on for a further

few seconds to allow the oil to thoroughly spread across each of the blades.

Switch off the clipper & remove any excess oil by gently dabbing with a cloth.

THE HOME CUT / TOOL TIPS

HOW TO USE

THE HOME CUT

BEFORE USING

• Always inspect the clipper blades for noticeable signs of damage.

• Ensure the clipper blades are well oiled before using.

• Always inspect the clipper blades before use to ensure they are free from

hair, debris etc.

• For best performance use on clean, dry hair that has been combed until

tangle-free.

• Always check that the tips of the two blades are parallel and aligned

correctly. Correctly aligned blades will provide best cutting performance.

Failure to do this can result in injury.

ALIGNING THE BLADES

1. First you’ll need to remove the blades from your clipper. To remove the

blades simply unscrew the two screws located on the back of the blade (see

Fig.3). The two blades should then simply be removed from the clipper head.

Keep the screws aside for reapplying the blades to the clipper head.

Large blade (cutting comb)

Blade screws

Small blade (cutter)

Fig. 3

THE HOME CUT / TOOL TIPS

2. To realign the blades, simply match them up, point to point. The top edge of

the large blade should be 0.5mm to 1.2mm higher than the top edge of the

small blade (see Fig.4). This is important so that the clipper does not cut too

close, or come into contact with the skin.

3. The extreme left-hand tooth of the large blade must cover or be to the

extreme left hand of the first small tooth on the small blade. Be sure that the

extreme right-hand tooth of the large blade touches the extreme right-hand

tooth of the small blade.

4. To re-attach the blades to the clipper head, simply slide the small blade

on to the white oscillating head, making sure that the small blade and large

blade are still properly aligned. Line up the large blade with the two screw

holes. Place the original screws, one in each hole and lightly tighten with a

Philips head screwdriver until secure.

5. The clipper is now suitable for use.

Fig. 4

Cutting Comb (large blade

Cutter

(small blade)

0.5mm to 1.2mm

Tabla de contenidos

Otros manuales de Cortapelos de VS Sassoon

VS Sassoon

VS Sassoon Turbo Power Clipper VSM318DNA Manual de usuario

VS Sassoon

VS Sassoon TURBO-PRO VS7702A Manual de usuario

VS Sassoon

VS Sassoon VS7920A Manual de usuario

VS Sassoon

VS Sassoon VSM795A Manual de usuario

VS Sassoon

VS Sassoon X5 PRO Manual de usuario

VS Sassoon

VS Sassoon Rugged Commander VSM423RA Instrucciones de montaje

VS Sassoon

VS Sassoon I-CLIP AUTOMATIC VS7930A Manual de usuario

VS Sassoon

VS Sassoon VS7183A Manual de usuario

VS Sassoon

VS Sassoon THE CRAFTED MAN VSM750A Instrucciones de montaje

VS Sassoon

VS Sassoon THE STYLE CUT Manual de usuario

VS Sassoon

VS Sassoon LITHIUM-PRO CERAMIC VSM7474A Manual de usuario

VS Sassoon

VS Sassoon XPERT CLIP VSM990A Instrucciones de montaje

VS Sassoon

VS Sassoon VSM7565A Manual de usuario

VS Sassoon

VS Sassoon VSM7473A Manual de usuario

VS Sassoon

VS Sassoon VSM7118A Manual de usuario

Manuales populares de Cortapelos de otras marcas

Clatronic

Clatronic HSM 800 Manual de usuario

Mellerware

Mellerware MACRO ALDANY MA20001 Manual de usuario

Create

Create CLIPPER EASY Manual de usuario

VALERA

VALERA X-Master 652 Manual de usuario

Wahl

Wahl 1870Li Manual de usuario

Remington

Remington HC5780 Manual de usuario

Lister

Lister Legend Manual de usuario

Philips

Philips HC5440/80 Manual de usuario

Andis

Andis MBA 23125 Manual de usuario

Philips

Philips Philishave HQC488/61 Manual de usuario

Shear Magic

Shear Magic Nifty 1800 Manual de usuario

Philips

Philips QC5390 Manual de usuario

Andis

Andis US-1 Guía de referencia rápida

Panasonic

Panasonic EH-KA81 Manual de usuario

Philips

Philips HC5450 Manual de usuario

Andis

Andis US-1 Instrucciones de instalación

Remington

Remington Classic HC450 Manual de usuario

Andis

Andis ML Instrucciones de instalación