VRN ProPex Manual de usuario
ProPex
Apex locator user manual
https://stomshop.pro
https://stomshop.pro
1
Contents
1.Symbols ......................................................................................................... 2
2.Technical Data.............................................................................................. 3
3.Parts Identification..................................................................................... 4
4.Intended use ................................................................................................ 4
5.Contraindications ....................................................................................... 5
6.Installation .................................................................................................... 6
7.Using............................................................................................................... 9
8.Maintenance and sterilization..............................................................18
9.Troubleshooting........................................................................................20
10.EMC table .................................................................................................21
11.Warranty ..................................................................................................26
12.Service life ................................................................................................26
13.Declaration...............................................................................................26
14.Environmental protection ..................................................................26
15.Right...........................................................................................................27
16.Warranty Card.........................................................................................28
https://stomshop.pro
2
If the instructions are not followed properly,
operation may lead to hazards for the product or
the user/patient.
Additional information, explanation of operation
and performance.
Do not dispose of with normal household waste.
(WEEE)
Serial number
Catalogue number
manufacture
Date of manufacture
Direct current
Type BF applied part
Safety class II device
Store in a dry place
Can be autoclaved up to a maximum temperature
of 135° Celsius
Temperature limitation
Relative humidity
Transport and storage pressure conditions: 70 kPa -
106 kPa
1. Symbols
Warring
NOTE
-20℃
55℃
80%
20%
106kPa
70kPa
https://stomshop.pro
3
2. Technical Data
Model ProPex
Package Size 205 mm x 185 mm x 50mm
Package weight Approx. 550g, ±10%
Power supply ICR14500, 3.7V 800mAh ±10%
Charger power
supply AC100-240V，50/60Hz
Charger nominal
power input 5VA
Degree of Protection IPX 0
Electrical safety class Class II
Applied part BF
Operating
conditions
Use: in enclosed spaces
Ambient temperature: 5° C ~ 40 ° C
Relative humidity: <80%
Operating altitude < 2000m above sea level
Atmospheric pressure: 70kPa ~ 106kPa
Transport and
storage
conditions
Ambient temperature: -20 ° C ~ +55 ° C
Relative humidity: 20% ~ 80 %
Atmospheric pressure: 70kPa ~ 106kPa
https://stomshop.pro
4
3. Parts Identification
Components and Accessories
Main unit 1 (pcs) Measuring Wire 1 (pcs)
Adapter 1 (pcs) Tester 1 (pcs)
Probe 2 (pcs) File clip 2 (pcs)
Lip hook 2 (pcs) User manual 1 (pcs)
1
2
3
4
5
6
7
4. Intended use
ProPex is an electronic apparatus for determining the apex location
during an endodontic treatment.
The device must be only used by or under instruction of quali-
fied medical personnel. The personnel who use the device must be
trained. FOR DENTAL USE ONLY !
https://stomshop.pro
5
5. Contraindications
This equipment is contraindicated in cases where patient/user carry
medical implants such as pace makers or cochlear implants etc.
Do not use the device for implants or other non-endodontic dental
procedures.
Safety and effectiveness have not been established in pregnant
women and children.
Warring
Read the following warnings before use:
1. The device must not be placed in humid surroundings or any-
where where it can come into contact with any type of liquids.
2. The device is intended for endodontic treatment and may only
be used by trained and qualified professionals such as dentists in the
hospital.
3. Do not expose the device to direct or indirect heat sources. The
device must be operated and stored in a safe environment.
4. The device requires special precautions with regard to electro-
magnetic compatibility (EMC) and must be installed and operated in
strict compliance with the EMC information. In particular, do not use
the device in the vicinity of fluorescent lamps, radio transmitters, re-
mote controls, portable or mobile RF communication devices, and do
not charge, operate or store at high temperatures. Comply with the
specified operating and storage conditions.
5. Gloves and a rubber dam are compulsory during treatment.
6.If irregularities should occur in the device during treatment, switch
it off. Contact the agency.
7.Do not open or repair the device by yourself，otherwise, void the
warranty.
https://stomshop.pro
6
6. Installation
6.1 Charging
1
Turn the device on by pressing the button.
connect the USB cable to the unit power connector,
and plug the other end into a power outlet.
While charging, the battery symbols on the screen is displayed in
sequence as bellow:
https://stomshop.pro
7
When the charging is completed, the battery symbols displays as :
IF the power is too low, the battery indicator will flash in:
Fully charged will take about 4 hours, depending on residual battery
power and battery state.
Warring
1. Charge the device for more than 4 hours before using the product
for the first time.
2. Only the original adapter and battery can be used.
3. Disposal of waste batteries in accordance with local regulations.
4. Do not use the device while charging.
5.Do not change the battery, only trained technician or distributor
can change the battery, the electronic parts will be damaged if use a
wrong battery or install with a wrong way.
6. Need to charge immediately, if the battery is low.
https://stomshop.pro
8
Plug the measuring wire into the socket of the device .make sure
connect properly.
1
2
3
Power button
Volume key
Reference key
Turn power on:
Short press the power button on the top of the machine, the ma-
chine will boot and enter the standby interface.
Turn power off:
Short press the power button .
6.2 Install accessories and power on-off
https://stomshop.pro
Tabla de contenidos
Manuales populares de Equipo dental de otras marcas
Vatech
Vatech EzRay Air VEX-P300 Manual de usuario
KaVo
KaVo GENTLEpower LUX Contra-angle 25 LP Manual de usuario
DENTSPLY
DENTSPLY SmartLite Focus Manual de usuario
LM
LM ProPower CombiLED Manual de usuario
Owandy Radiology
Owandy Radiology RX-AC Manual de usuario
mectron
mectron Piezosurgery Manual de usuario
