Voxson HD50 Manual de usuario
1VOXSON HD50
CONTENTS
SAFETY AND WARNINGS .....................................................................1
CONTENTS AND EQUIPMENT ..............................................................2
Package Contents................................................................................2
Front Panel...........................................................................................3
Rear Panel............................................................................................3
Remote Control Unit.............................................................................4
CONNECT YOUR EQUIPMENT..............................................................5
BASIC OPERATION................................................................................9
MAIN MENU ..........................................................................................12
MENU TREE..........................................................................................13
INSTALLATION.....................................................................................13
Auto Scan (Recommended) ...............................................................14
Manual Scan.......................................................................................14
PROGRAM EDIT...................................................................................15
SYSTEM SETUP ...................................................................................17
A/V Settings........................................................................................17
Local Time Setting..............................................................................17
System Information.............................................................................17
Default Setting....................................................................................17
USER PREFRENCES............................................................................18
TROUBLE SHOOTING..........................................................................19
TECHNICAL SPECIFICATION..............................................................20
GLOSSARY OF TERMS .......................................................................21
1VOXSON HD50
SAFETY AND WARNINGS
This digital terrestrial receiver has been manufactured to satisfy international safety
standards. Please read the following safety precautions carefully.
Safety Instructions and Precautions
This symbol alerts the user to the presence of ‘dangerous voltage’within
the enclosure of the receiver. It may cause an electric shock to person.
This symbol is intended to alert user to the presence of important
operating and maintenance instructions in the literature accompanying
the receiver.
Notice
Follow these directions in order to protect your receiver better.
•Do not place too many objects on the top.
•Do not use damp cloth to clean.
•Do not operate in wet environment and avoid being exposed in the sun.
•Do not use in the atrocious weather, such as storm.
•Turn off the power when connecting to the antenna / TV.
Warning
1. Follow these directions in order to minimise the damage to the power cord
or plug
•Do not modify or process the power cord or plug arbitrarily.
•Do not bend or twist the power cord too much.
•Pull the plug, instead of the cord, while disconnecting the power.
•Keep heating appliances as far as possible from the power cord.
2. Follow these directions in case of electrical shock.
•Make sure that the type of power supply in your home is AC 100~240V 50Hz 10W
•Do not open the main body.
•Do not insert metals or inflammable objects inside the product.
•Do not touch the power plug with a wet hand.
•Disconnect the power cord in case of lightening.
2VOXSON HD50
CONTENTS AND EQUIPMENT
This chapter describes detail instructions about the product and its Accessories
NOTE: Only the special RS-232 upgrading cable provided by the manufacture can
be used for upgrading. The normal RS-232 cable can damage the receiver. Please
contact your supplier when upgrading.
Package Contents
•Please check all package contents before using your receiver
Remote Control YPbPr Cable CVBS Cable Owner’s manual
Voxson HD50 Set Top Box
3VOXSON HD50
CONTENTSANDEQUIPMENT
Front Panel
①POWER turns the Stand-by mode ON/OFF.
②CHANNEL- Changes the channel downward.
③CHANNEL+ Changes the channel upward.
④VOL DOWN decreases volume.
⑤VOL UP increases volume.
Rear Panel
①ANT IN connect the antenna here.
②LOOP OUT connect a RF signal from the STB to either the RF Input jack (antenna)
on your VCR or to the antenna input of your TV.
③ HDMI HD video output used to connect to your HDMI device.
④ PDIF/COAXIAL Digital audio output.
⑤ S-VIDEO Y/C output for a S-VHS or Hi-Fi Video Recorder.
⑥ AUDIOL/R Audio output to connect to your TV.
⑦ VIDEO CVBS output to connect to your TV.
⑧ YPbPr High definition video output to connect to your TV.
⑨VGA Video output to connect a VGA display monitor.
⑩RS-232 Serial port for software upgrade.
⑪POWER Switch ON/OFF.
4VOXSON HD50
CONTENTS AND EQUIPMENT
Remote Control Unit
1. MUTE mute or unmute the audio.
2. OUTPUT switches the out mode of
HD between YPbPr and VGA.
3. SIGNAL shows the quality level of the
signal.
4. SUBT switches closed captions
ON/OFF
5. AUDIO displays the Audio format of
the selected channel.
6. INFO displays the current program
information.
7. TTX switches the teletext service
ON/OFF.
8. MENU To enter into the main menu,
Press again to exit to previous menu.
9. ◀▶ controls the level of the volume.
10. EPG Electronic Program Guide.
11. EDIT To edit the properties of the
current program. Add to favourites groups,
lock and skip.
12. PAGE+ To Page up (5+).
13. FOUR COLOUR KEYS To assist in
the operation of the box.
14. NUMBER BUTTONS (0-9) used for numerical operations, especially to change
program directly.
15. ASPECT To toggle among 16:9 full screen, 16:9 letter box, 4:3 full screen, 4:3 letter
box, 4:3 panscan.
16. POWER turns the Stand-by mode ON/OFF.
17. PAUSE pauses the current program when pressed and plays when pressed again.
18. TV/RADIO To switch the program between TV and Radio.
19. FAV lists channels stored as your favourites.
20. EXIT To cancel an operation or exit a menu directly.
21. ▲▼ changes the channel upward / downward.
22. OK To confirm the choice with the highlighted menu item / to open the program list
and select the program by moving upward/downward.
23. RECALL returns to view the previous channel.
24. PAGE- To Page down (5-).
25. FORMAT To switch the different resolution (1080i, 720P, 576P supported).
5VOXSON HD50
CONNECT YOUR EQUIPMENT
HOW TO GET GOOD RECEPTION
• In general you are not required to change the existing antenna. However if your antenna
is not in good condition you should consider replacing them to ensure uninterrupted digital
television viewing.
•Viewers in areas of poor analogue reception may need specialists’ advice about
antenna requirements for digital reception in their area.
•It’s recommended that viewers use quad shielded cable from the antenna to the
television.
Connections to a TV
There are several ways of connecting your STB to the TV and Hi-Fi System. For high
definition viewing your display must support either 576p, 720p, 1080i resolution. Also the
connection between the STB and display must be YPbPr component, VGA, or HDMI.
Other connection will provide standard definition viewing.
METHOD 1. Connect the STB via Video and Audio (for general viewing
/connection to a VCR)
1. Connect your terrestrial antenna to Antenna IN socket on the rear of your receiver.
2. Using 3RCA cable (yellow, white and red) provided, connect to the VIDEO and
AUDIO R and AUDIO L connections on the rear of the box. Be sure that the colour
matches the plugs.
3. Using a S-VHS cable (not provided), connect the STB to the TV. The audio
connection is as above (Item 2).
6VOXSON HD50
CONNECT YOUR EQUIPMENT
METHOD 2. Connect the STB via YPbPr (for high definition viewing)
1. Connect your terrestrial antenna to Antenna IN socket on the rear of your receiver.
2. Using 3 RCA Cable (green, blue and red) provided, connect to the YPbPr
connections on the rear of the box. Be sure that colour matches the plugs.
3. Using the white and red cable, connect the audio to the TV.
METHOD 3. Connect the STB via VGA connection (for high definition viewing)
7VOXSON HD50
CONNECT YOUR EQUIPMENT
1. Connect your terrestrial antenna to Antenna IN socket on the rear of your receiver.
2. Using a standard DB15 computer monitor cable to connect VGA connection on the
rear of the box. (This cable is not provided in the package). When connecting this, you
are sure to switch to the VGA mode by pressing Output key.
3. Using the 3 RAC cable (yellow, white and red) provided, connect only the audio to
the TV.
METHOD 4. Connect the STB via HDMI connection (for high definition viewing)
1. Connect your terrestrial antenna to Antenna IN socket on the rear of your receiver.
2. Using a HDMI cable to connect HDMI connection on the rear of the box. (This cable
is not provided in the package).
Tabla de contenidos
